emtest V4780S2
used
- Manufacturer: emtest
Details emtest V4780S2 V4780 S2 Auto Transformer The emtest V4780S2 ( V4780 S2) tapped auto transformer can be used to simulate power supply failures as voltage interruptions. The basic standard EN/IEC 61000-4-11...
Dublin, IrelandNoiseKen FNS-AX3-B50
used
- Manufacturer: NoiseKen
Details The Noiseken FNS-AX3-B50 is an advanced Fast Transient Burst Simulator designed for complance testing in accordance with IEC61000-4-4 edition 2. This unit features Pulse Outputs up to 4.8 kV at 2 MHz Puls...
Dublin, IrelandKeysight Technologies 8546A
used
- Manufacturer: Agilent - Keysight
Details The Keysight (Agilent) 8546A EMI Receiver, composed of the 85462A RF Section and 85460A RF Filter Section, is a CISPR 16-1 compliant system for precise EMI testing from 9 kHz to 6.5 GHz. It enables confor...
Dublin, IrelandETS Lindgren 4825-2
used
Details The ETS Lindgren (EMCO) 4825-2 LISN is a two-line, low pass, filter network used for conducted emissions measurements. The product is placed between the power mains and the equipment under test (EUT) to s...
Dublin, IrelandTeseq (Schaffner) NSG437
used
- Manufacturer: Teseq - Schaffner
Details TESEQ (SCHAFFNER) NSG437 The Teseq (Schaffner) NSG437 ESD Simulator is designed to sit comfortably in the operator's hand, with cur operating conditions constantly displayed and clearly visible. The simul...
Dublin, IrelandHaefely PIM120
used
- Manufacturer: Haefely
Details Haefely PIM120 (call for availability) The Haefely PIM120 Impulse Module is used with the PCD120 to test telecom systems using the 10/700us impulse (also called telecom impulse). This impulse is character...
Dublin, IrelandHaefely PCD120
used
- Manufacturer: Haefely
Details Haefely PCD120 The Haefely PCD120 CDN, as part of the PSURGE 8000 system is tailored to meet the ITU and IEC requirements for 2 & 4 wire interfaces. It allows the selection of both the required resistors ...
Dublin, IrelandEMC Partner TRA2000
used
- Manufacturer: EMC
Details The EMC Partner TRA2000 Transient Test System offers full compliance CE Mark and ANSI transient test solutions. A choice of 4kV or 6kV SURGE generators with Combination, 100 kHz Ring, and 10/700 waves plu...
Dublin, IrelandHaefely PIM100
used
- Manufacturer: Haefely
Details Haefely PIM100 The Haefely PIM 100 as part of the PSURGE 8000 Surge Platform System can be used together with Coupling/Decoupling Networks (CDNs) for superimposition of the impulse on AC and DC power line...
Dublin, IrelandEMCO 3810/2
used
- Manufacturer: Emco
Details Emco 3810/2 The Emco 3810/2 Line Impedance Stabilization Network is a twochannel low pass filter network designed to isolate the equipment under test from an external power source while steering any radio...
Dublin, IrelandEMCO 3115
used
- Manufacturer: Emco
Details EMCO 3115 The Emco 3115 Antenna (double ridged guide) is a linearly polarised broadband antenna with excellent gain and good VSWR characteristics. The frequency range is 1 GHz to 18 GHz. The Emco 3115 was...
Dublin, IrelandChroma 63303A
used
- Manufacturer: Chroma
Details Chroma 63303A DC Electronic Load Module The Chroma Model 6330A series high speed DC electronic load improves CPU clock, baud rate, parser and added synchronic parallel function for fast operation. Each lo...
Dublin, IrelandSchaffner NSG 500C/506C
used
- Manufacturer: Teseq - Schaffner
Details The NSG500C unit contains two Generators in a compact form, one for the microsecond Pulse range (Pulses 1 and 2) and the other for the fast Pulse bursts in the nanosecond range
Dublin, IrelandTeseq (Schaffner) NSG 4070
used
- Manufacturer: Teseq - Schaffner
Details Signal generator 9 kHz to 1 GHz Power meter 9 kHz to 1 GHz (4 channels, thereof 1 for internal use) Use of external amplifiers and directional couplers possible 5,7? TFT color display as well as hard and ...
Dublin, IrelandMarconi IFR Aeroflex 2025
used
- Manufacturer: Aeroflex
Details Signal Generator, 2.51 GHz Max, Synthesized, AM / FM / Phase / Pulse Modulation, TCXO Timebase
Dublin, Ireland