Used Turret Lathes

Hardinge Turret Lathe - Hc

• Manufacturer: Hardinge
• Model: HC

6" 6 Jaw Chuck, 1" Bore, Made In Usa, 1.5 Hp Name: Turret Lathe | Arrival date: 10-20-2025 | Dimensions l x w x h (inches): 71 x 41 x 70 | Weight (lb.): 2020 | Available quantity: 1

Warner & Swasey 21" Turret Lathe - No.3 / M-1200

• Manufacturer: Warner & Swasey

W/parts, Compound Rest, 1 1/2" Bore, (3105#) 98x46x66, (270#) 88x55x17, *contains 2 Peices

HC HARDINGE "SUPER PRECISION" TURRET CHUCKING LATHE w/COLLET CHUCK - 8-POSITION POWER TURET - SOME COLLETS & TOOLING

• Manufacturer: Hardinge
• Model: HC

HC HARDINGE "SUPER PRECISION" TURRET Imperial Metric CHUCKING LATHE Serial No HC3160K, Model HC EQUIPPED WITH: 8-Position Turret w/Power Electric Variable Feed Lever Head Collet Type Chuck Turret Depth Stop Coola...

WARNER & SWASEY NO. 3 TURRET LATHE. #1227224

• Manufacturer: Warner & Swasey
• Model: NO 3

11" X 18" HARDINGE HC TURRET LATHE. #0895424

• Manufacturer: Hardinge
• Model: HC

Maximum swing over bed: 11" | Distance between centers: 18" | Spindle speeds - variable: 125 TO 3000 RPM | Hole thru spindle: 1-1/4" | Compound slide travel: 3" | Power feed range: 1/4" TO 7" PER MIN | Thread ra...

48" FRORIEP 4-JAW VERTICAL TURRET LATHE. #0679265

• Manufacturer: Schiess Froriep

(12) .005" - .354" Table diameter: 49" (4-JAW) | Max sing: 57" | Vertical under rail: 45" | Rail travel: 48" | Head travel: 36" LEFT-RIGHT | Turret: 5 POSITION | Main head feeds: (12) .005" - .354" | Side head fe...

48" SUMMIT CNC VERTICAL TURRET LATHE. #1218525

• Manufacturer: Summit

Table Size 48" 4 - Jaw Maximum Swing 55" Height Under Rail 50" Rail Travel 48" Table Speed 0 To 260 Rpm's Feeds .07 To 3.0 IPR Rapids Traverse 120 I.P.M. Ram Head Travel 50" Ram Head Travel Cross 28" Main Motor 5...

Warner & Swasey 4A Square Head Saddle Type Turret Lathe w/ 9-1/2” Hole

• Manufacturer: Warner & Swasey
• Model: 4A M3580

Unit is USED and in VERY GOOD CONDITION. Unit has been powered and tested at the facility. Unit is being sold AS-IS, WHERE-IS, AS-SHOWN. Pictures are of the actual unit being purchased. If the buyer has any quest...

Warner & Swasey 2A Square Head Saddle Type Turret Lathe w/ 3-3/4” Hole

• Manufacturer: Warner & Swasey
• Model: 2A

Unit is USED and in VERY GOOD CONDITION. Unit has been powered and tested at the facility. Unit is being sold AS-IS, WHERE-IS, AS-SHOWN. Pictures are of the actual unit being purchased. If the buyer has any quest...

1969 2A WARNER & SWASEY Saddle Type Turret Lathe

• Manufacturer: Warner & Swasey
• Model: 2A

Size: 2A

Warner & Swasey Gray Single Head Vertical Turret Lathe

• Manufacturer: Warner & Swasey

Warner & Swasey Gray Single Head Vertical Turret Lathe, w/ Pendant Control, 54" Chuck, Dynapath Delta Series CNC Control Panel

#3 WARNER & SWASEY TURRET LATHE

• Manufacturer: Warner & Swasey
• Model: NO 3

#3 WARNER & SWASEY TURRET LATHE PRICE: Loaded on Truck, Our Warehouse, York, PA …… $1,950.00 AS IS HMC Stock # 25015-P Machine Serial No.: 1034178 Machine Model No.: M-1200 Swing Over Ways: 15" Swing Over C...

Sandvik Lathe Turret to Capto C4 Drive Adapter 440-810111L185 (LOC2823B)

• Manufacturer: Sandvik
• Model: Capto

Sandvik Lathe Turret to Capto C4 Drive Adapter 440-810111L185 (LOC2823B) Condition:New Sandvik Lathe Turret to Capto C4 Drive Adapter 440-810111L185