Used Processing in Wallonia, Belgium

920 mm x 840 mm x 250 mm, good casting plates, GS, 190 kg

• used

With trunnions and sleeves, Ø 45 mm With conish clamps, crossbeams

Mold turnover machine IMF, 1500 mm

• used

On a foot All movements hydraulic Weight: 1200 kg | External dimensions: 3250 mm x 1500 mm, h. 2450 mm | Useful dimensions: 1500 mm x 1400/2800 mm | Clamping capacity: 450 mm - 1500 mm

2002 Induction furnace ABP, 2 x 8 t, 250 Hz, 7,3 MW

• used

• Manufacturer: ABP

6100 kW, 20000 V Primary voltage: 20.000 V, frequency: 250 Hz 24 pulses Furnace installation consisting of: - 2 x furnace body 8 t, on load cells - 1 x electric power-desk - 1 x pump station - Control desk with P...

1998 Thermical reclamation plant, RICHARDS, ± 3 t/h

• used

Thermal sand reclamation 2-3 t/h, gas-heated Installation consisting of: - Heating chamber - Loading conveyor with sand hopper ± 2 m³ - Fluid bed cooler RICHARDS, air and water cooled - Electric control desk with...

Blower, 4 kW

• used

For aeration or cooling Weight: 100kg | External dimensions: 1200mm x 760mm, h. 1070mm | Motor: 4 hp, 500 V, 1420 rpm

Conveyor screw, 1450 x 105mm

• used

• Manufacturer: SCHNECKENBAU

Type: TS200/5500, serial number: 01/2981 Useful dimensions: outlet: Ø105mm, inlet: Ø110mm Gearmotor SEW, type: FA37/GD190S4, 1,1 kW, 1400/ 59 rpm, 220/380 V Axle base between entrance and exit 1450mm Pipe Ø100mm ...

Bench polisher 1side on the right

• used

With protection/extraction hood stainless Extraction rocket Ø150mm Without control Bore Ø100mm With dust drawer

Bench polisher 1side on the right

• used

Motor WEG, 5,5 kW; 955 rpm; 380/660 V With protection/ extraction hood stainless Extraction rocket Ø150mm Without control Bore Ø100mm With dust drawer

Double workshop grinder GREIF, Ø400 mm

• used

• Manufacturer: Greif

Motor type DV40W; 2,2 kW; 1420 rpm; 220/ 380 V Direct drive

Magnetic vibrating conveyor 1700mm x 510mm x 180mm

• used

With cover and pneumatic trap on the exit Without control box (offer for control box on request)

Magnetic vibrating conveyor 1700 mm x 510 mm x 180 mm

• used

With cover and pneumatic trap on the exit Without control box (offer for control box on request)

Vibrating convayor BMD 1260 mm x 550 mm

• used

Motor FLOTTMANN, type: RUL800/14, 2 x 0.55 kW; 1420 rpm; 220/380 V

Alu melting furnace tiltable MORGAN, ± 600 kg, gas heated

• used

• Manufacturer: Morgan

Engine brand ALMO, 2,2 kW; 1435 rpm; 230/ 400 V Gas burner ELCO, type EK 3.60 G-ZWA20 200 - 600 kW; 20 - 70 m³/h of natural gas With stairs With control box With hydraulic unit With crucible Ø 670 mm, height 900 mm

2100 mm x 800 mm x 105 mm,148 kg from iron

• used

400 mm x 400 mm x 130 mm, 9 kg; welded

• used