Used Sheet Metal Processing

Binks Paint line

• Manufacturer: Binks

"Paint line is a continuous chain on edge line with a primer booth, flash oven, spray booth and curing oven. The entire paint line is clean and functional. Located in Two River, WI "

SFA CNC Servo Sheet Metal Folding Machine (0,3 – 4 mm thickness / 2050-4200 mm length)

0,3 – 4 mm thickness / 2050-4200 mm length Clamping beam with 350 mm opening height and 170 mm high, segmented goat foot tools. Dual drive clamping beam with ball screw spindle system for more clamping power. 150...

MFE CNC Servo Sheet Metal Folding Machine (0,3 – 5 mm thickness / 2050-4200mm length)

0,3 – 5 mm thickness / 2050-4200mm length Clamping beam with 180 mm opening height and dual servo driven ballscrew spindle system. 30° single piece sharpnose tool. 15 and 40 mm wide folding beam tools, single pie...

MFB CNC Motorized Sheet Metal Folding Machine (0,3 – 3 mm thickness / 2050-4200mm length)

0,3 – 3 mm thickness / 2050-4200mm length 220 mm opening height capacity on the upper beam. Eccentric upper beam power transmission system for rapid clamping/unclamping. 1000 mm servo backgauge system with feathe...

MFG CNC Motorized Sheet Metal Folding Machine (0,3 – 2,5 mm thickness / 2050-3200 mm length)

0,3 – 2,5 mm thickness / 2050-3200 mm length 180 mm opening height capacity on the upper beam. Eccentric upper beam power transmission system for rapid clamping/unclamping. 10 and 25 mm wide single piece folding ...

REIS TUS 160

• Manufacturer: Reis
• Model: TUS-160

Used 1998 REIS Model TUS 160 hydraulic mold spotting and tryout press. 100-ton capacity, 4-post design, 61" W x 71" L bed area, 39.37" stroke, and 41.33" opening. Includes swing down platen and sliding table for ...

MFD CNC Motorized Combi Sheet Metal Folding Machine (0,3 – 3 mm thickness / 2550-4200mm length)

0,3 – 3 mm thickness / 2550-4200mm length 200 mm opening height capacity on 180° rotating clamping beam with 2 tool stations as 100 mm high segmented goat foor tool and 20° single piece sharpnose tool. Eccentric ...

MFA CNC Servo Combi Sheet Metal Folding Machine (0,3 – 4 mm thickness / 2050-4200mm length)

0,3 – 4 mm thickness / 2050-4200mm length Dual drive clamping beam with ball screw spindle system for more clamping power. 250 mm opening height on 180° rotating combi clamping beam with 2 tooling stations as 125...

7075-0 Sheet Metal - .071" - 30+ Sq Ft

May have some cuts made.

7075-0 Sheet Metal - .040" - 40+ Sq Ft

May have some cuts made.

7075-0 Sheet Metal - 40+ Sq Ft

May have some cuts made. 20+ Sq Ft of .063", 25+ Sq Ft of .032"

Reis TUS-130 Sheet Metal Processing

• Manufacturer: Reis
• Model: TUS-130

Good condition Reis TUS-130 Sheet Metal Processing available between 1997 and 2001 years. Located in USA and other countries. Click request price for more information.