Used Materials Testing

Buehler Simplimet II specimen mounting press 20-1320-115, with a choice of 1",

• Manufacturer: Buehler
• Model: Simplimet

Buehler Simplimet II specimen mounting press 20-1320-115, with a choice of 1", 1.25" or 1.5" mold, 115 volt heater 85#

Buehler Ecomet 3 49-1750-160 8 inch polisher with Automet2 power head. Lift Lock

• Manufacturer: Buehler
• Model: Ecomet 2

Buehler Ecomet 3 49-1750-160 8 inch polisher with Automet2 power head. Lift Lock chuck 50 to 500 rpm. 115 volts. Please note the specimen holder shown in the photos is not included.

Buehler Abrasimet2 10" abrasive saw. 95-C1800-260 . left & right hand

• Manufacturer: Buehler
• Model: Abrasimet-2

Buehler Abrasimet2 10" abrasive saw. 95-C1800-260 . left & right hand vises, 4 HP 230/60/3 Without pump

Buehler Simplimet press with 1" mold and 115 volt heater.

• Manufacturer: Buehler
• Model: Simplimet

Buehler Simplimet press with 1" mold and 115 volt heater.

Buehler Minimet 1000 cross section polisher, 69-1000 120/240 universal voltage,

• Manufacturer: Buehler
• Model: Minimet

Buehler Minimet 1000 cross section polisher, 69-1000 120/240 universal voltage, with instruction manual

Buehler IsoMet 5000 automatic precision saw 11-2780, 7" blade capacity 200-5000

• Manufacturer: Buehler
• Model: Isomet-5000

Buehler IsoMet 5000 automatic precision saw 11-2780, 7" blade capacity 200-5000 rpm, Motorized micrometer 1.25 HP motor. 83-264 VAC 50/60

Buehler IsoMet reconditioned low speed saw, 300 rpm 11-1180-160 complete with

• Manufacturer: Buehler
• Model: Isomet

Buehler IsoMet reconditioned low speed saw, 300 rpm 11-1180-160 complete with standard arm, weight set, choice of chuck below and 4" blade. 115 volts. Now shown with 11-1187

Buehler Ecomet III variable speed polisher. With 8" wheel. 50 to 500 rpm 115

• Manufacturer: Buehler
• Model: Ecomet

Buehler Ecomet III variable speed polisher. With 8" wheel. 50 to 500 rpm 115 volts

Prufbau Quartant ABR Abrasion Tester

Prufbau Quartant ABR Abrasion Tester, SN: 0200869, NOTE: Powered on / Without CE mark

Anton Paar Softening Point Tester RKA5

• Manufacturer: Anton Paar

Anton Paar Softening Point Tester RKA5, SN: 60019356, NOTE: Powered ON

Struers CitoPress-30 Dual Hot Mounting Press

• Manufacturer: Struers

This 2018 Struers CitoPress-30 Dual automatic hot mounting press is a current model press, and is as new; it has only made 64 mounts. The lab it came from shut down shortly after it was purchased. It has two cy...

Struers Discotom-2 Manual 10″ Saw

• Manufacturer: Struers
• Model: Discotom-2

Struers Discotom-2 Manual 10″ Saw – this is an older model, very heavy duty saw. The pneumatic autofeed function is not working, so it functions only in manual mode, but is tested and in good working order. It ...

Clark CPT Portable Rockwell Tester

• Manufacturer: Wilson Rockwell

The Clark CPT tester is a lightweight tester for portable testing of Rockwell hardness, with a wide range of sample sizes accommodated. This unit includes a Rockwell B 1/16” ball indenter, and other indenters ar...

TBT ML Materials Testing

• Manufacturer: TBT
• Model: ML

Good condition TBT ML Materials Testings available between 2004 and 2014 years. Located in Germany and other countries. Click request price for more information.