Used Drilling Rigs in Kentucky, USA

2018 JUNJIN JD-800EII

• Manufacturer: Junjin
• Hours: 6,132 h

2018 JUNJIN JD-800EII CRAWLER VERTICAL DRILL, Cummins QSB6.7 Tier 4 Motor, 175hp, 6132 Hours, EROPS, AC, Backup Camera, Yamamoto YH80A Drifter with 2199 Hours, Kawasaki Variable Piston Hydraulic Pump, Carousel Ty...

1999 SANDVIK D45KS

• Manufacturer: Sandvik
• Model: D45KS
• Hours: 26,358 h

1999 SANDVIK D45KS VERTICAL DRILL, Cat 3406E, 450hp, 26358 Hours, 29.5" Tracks, 60%, EROPS, Heat/AC, 95' 3x30' Drill, 6 3/4" Drill Bit, 1050/100 Air, Drill Has Been Gone Through Top to Bottom, Too Many New Parts ...

2005 ATLAS COPCO ECM660 III

• Manufacturer: Atlas-Copco
• Model: ECM 660 III
• Horsepower: 260 hp
• Drill Pipe Diameter: 51 mm

Montabert HC160 Drifter Setup for T45 Cummins Diesel Engine Unit shows 2,307 engine hours, we estimate approximately 12,307 total frame hours 3,949 Percussion hours

2004 ATLAS COPCO ECM660 III

• Manufacturer: Atlas-Copco
• Model: ECM 660 III
• Horsepower: 260 hp
• Drill Pipe Diameter: 51 mm

3.5 – 4.5 Inch Class Montabert HC160 Drifter Very Well Maintained Unit 7036 Total Frame Hours 2251 Percussion Hours

1998 Ingersoll Rand DM-45E

• Manufacturer: Ingersoll Rand
• Model: DM-45E
• Horsepower: 600 hp
• Hours: 500 h

Used Ingersoll Rand DM-45E Rock Drill for sale. CAT® 3406B -Remanufactured Engine -Final drive needs repair -Hydraulic pumps need replacing

1984 INGERSOLL-RAND CM351

• Manufacturer: Ingersoll Rand
• Model: CM-351

HIGH-PRESSURE DTH DRILL RIG Cat Diesel Powered Onboard High-Pressure Sullair Air Compressor Runs 20’ft drill pipe

2005 INGERSOLL_RAND ECM 370

HIGH-PRESSURE DTH DRILL RIG Cat Diesel Powered Onboard High-Pressure Sullair Air Compressor Runs 20’ft drill pipe

2015 EPIROC FLEXIROC D60

• Manufacturer: Epiroc

DTH Class* Cat C15 Tier 4 Final Diesel Engine * Drill Pipe: 16’ft pipe x 4” x 2-7/8” REG API Thread. Very Good Condition This rig has 9800 engine hours and 6000 impact hours.

1997 INGERSOLL-RAND DMLSP

• Manufacturer: Ingersoll Rand

DTH Class Single Pass Drill Rig – 55’ft – 60’ft Mast Cummins QSK19 Diesel Engine High Pressure – IR HR2.5 – 1050 CFM @ 350 PSI Onboard Air Compressor CAT 330L&S Undercarriage

1996 TOYO TCD928C

• Manufacturer: Toyo

2.5 – 3.5 Inch Class TOYO TH800C Hydraulic Drifter Powered By DEUTZ BF6L913 Diesel Engine This is a Mazda Toyo TCD918E Self Contained Hydraulic Drill Extendable Boom Onboard Sullivan air compressor – 160 CFM @ 15...

1998 REEDRILL 300

• Manufacturer: Reedrill

3.5” – 4.5” Inch Class CAT 3126 Diesel Engine Self-Contained Hydraulic Drill HPR1H Hydraulic Drifter New Injection Pump 2017 Handles a 20’ft starter steel Set up for T45 Low frame Hours Extendable Boom Dust Colle...

GILL BEETLE

DTH Class Drills Holes 4 to 24 in Diameter Able to Drill Holes Vertically, Horizontally, and Every Angle in Between Has a Hydraulic table for up to 9 opening IR-360 DTH Hammer w/ Bits 8.5 and 7.5 IR-350 DTH Hamme...

2020 Sandvik DP1500I

• Manufacturer: Sandvik
• Model: DP1500
• Operating weight: 23,000 kg

2,295 total hours & 1,015 percussion hours Cat C13 Tier 4 Diesel Engine Drifter / Rock Drill is a RD1635CF Excellent condition

SOOSAN JD1400E

• Manufacturer: Soosan

2017 Year – Junjin Soosan JD1400E serial # 67 – Rock Commander Unit has approx.. 6,552 total hours & 2,123 percussion hours.YH135 Drifter, 400 CFM @ 150 PSI onboard GHH-Rand Air Compressor, Rod Changer, Dust Coll...

2008 ATLAS COPCO ECM720

• Manufacturer: Atlas-Copco
• Model: ECM 720
• Horsepower: 385 hp
• Drilling depth: 29.5 m

4.5 – 5.5 Inch Class Montabert HC200A Drifter Cat C11 Engine Set up for 60mm drill steel Only 3570 Total Hours