Used Heat Exchangers in Michigan, USA

Dry Coolers AquaVent AVR Air-Cooled Heat Exchanger

• Manufacturer: AVR

Reliable, high-efficiency, air-cooled heat exchanger The AquaVent AVR is a reliable, low-maintenance, air-cooled heat exchanger widely used to cool closed-loop processes where the fluid temperature is close to am...

Dry Coolers ThermoFlow Plate Heat Exchanger

• Manufacturer: Dry Coolers

Cleanable, high-efficiency plate heat exchanger The ThermoFlow Plate Heat Exchanger distributes fluids evenly across stainless-steel plates for high efficiency heat transfer. Inlet and outlet ports minimize conta...

Dry Coolers LSX Series Spot Cooler

• Manufacturer: Dry Coolers

Packaged, open-frame air-cooled heat exchanger with integrated pump, tank, and controls The LSX Series Spot Cooler combines the AquaVent AVI Series Air-Cooled Heat Exchanger with a factory-mounted pump, tank and ...

Dry Coolers LS Series Spot Cooler

• Manufacturer: Dry Coolers

Packaged air-cooled heat exchanger with integral pump, tank, and controls The LS Series Spot Cooler is a reliable, low-maintenance packaged pump station with an integral heat exchanger. The heat exchanger, pump, ...

Dry Coolers AquaVent FC-AVI Free Cooler

• Manufacturer: Dry Coolers

Supplemental cooling for energy and cost savings in winter The Aqua-Vent FC-AVI Series Free Cooler is a low-maintenance, air-cooled heat exchange system that automatically offloads chillers in cool weather. Redu...

Dry Coolers Solanus SQC Quench Cooler

• Manufacturer: Dry Coolers

Rugged air-cooled heat exchanger for safe, efficient quench oil cooling SAFE – ZERO WATER USE – LOW MAINTENANCE The Solanus SQC Quench Cooler is an inherently safe method of cooling high-temperature quenc...

SS Distillation skids, 100 hp, 1100 cfm full ss EXP, sihi, kinney, travaini,

• Manufacturer: Sihi

1) Vacuum skid, dual 550 cfm stainless steel dual stage, high vacuum (29") oil or water seal liquid ring vacuum pump skid, all wet parts, stainless steel, explosion proof. 2) Distillation, or, Remediation (knocko...

FANUC HEAT EXCHANGER UNIT

• Manufacturer: Fanuc

The item is brand new, direct from the manufacturer, in its original packaging.

Heat Exchanger Packages (HEX)

HEAT EXCHANGER WATER-TYPE

AMERICAN INDUSTRIAL MODEL CHS-1012-SP. SHELL: 300 PSI: TUBES: 150 PSI. TEMP:300 F. APPROX 18" X 7" X 8". APPROX 100 POUNDS.

HEAT EXCHANGER AIR TYPE

OIL/AIR INC (OAI). MODEL DA133-6-BP1.2-C100. ¾ HP MOTOR (230/460V; 1200 RPM). RATED TO REMOVE 60-70 H.P. AT 30-40 GPM OF OIL FLOW. OVERALL DIMENSIONS APPROX: 32” X 24” X 30” TALL. APROX 500 POUNDS. ITEM #2573.

2-90 Ton Capacities (Recirculating)

• Indoor use • Air-cooled, water-cooled, or split system • Water, water/glycol, water soluble or oil-based fluids • Fluid setpoint 50—90°F • Capacities: 24,000 to 1,080,000 BTU/hr (see reverse for fluid temp and ...

1 to 40 Ton Drop-In

• Indoor use • Air-cooled, water-cooled or split system (remote condenser) • Drop-in, SS evaporator coil with custom height based on tank design • Water, water/glycol, water-soluble oils, and oil-based fluids • F...

Residential Single-Wall

Heat Exchanger-Single-Wall 1½” O.D. glass coated (Ultonium® Glass Lining with Microban®) carbon steel coil. The coil has a heat transfer area of 14.2 sq. ft. and a stored water volume of 2.7 Gal. Maximum supply t...