Used Cnc Lathes in Lombardy, Italy

HARDINGE CONQUEST T51 motorized 3-axis cnc lathe

• Manufacturer: Hardinge
• Model: CONQUEST T51

Used HARDINGE CONQUEST T51 motorized 3-axis cnc lathe The used HARDINGE CONQUEST T51 motorized 3-axis cnc lathe is a rugged and precise CNC lathe with a medium-sized tilting bed, turning length about 500mm, bar p...

HAAS ST 30Y Y-axis motorized cnc lathe

• Manufacturer: Haas
• Model: ST-30Y

Used HAAS ST 30Y Y-axis motorized cnc lathe The used HAAS ST 30Y Y-axis motorized cnc lathe is a fast, medium-sized tilting-bed CNC lathe equipped with a tailstock, "C" axis spindle and a motorized Y-axis turret ...

Multi-spindle lathe TORNOS SAS 16 DC

• Manufacturer: Tornos
• Model: SAS16DC

Tornio automatico plurimandrino Diametro barra: Massima lunghezza di avanzamento: 63 mm Massima lunghezza del pezzo tornito: 52 mm Numero di velocità dei mandrini: 16 Velocità mandrini (impostabile da PLC): 1200-...

1986 STAR MOD. cnc lathe JNC 16

Tornio automatico a fantina mobile cnc Torrette: Diametro: 16 mm. Max avanzamento barra: 160 mm. Max avanzamento barra con bussola sincronizzata: 95 mm. Velocità dei mandrini: 375 – 7,500 giri/min. Potenza motore...

2013 POLYGIM DIAMOND 42 CSL sliding headstock cnc lathe

• Manufacturer: Po Ly Gim

Used POLYGIM DIAMOND 42 CSL sliding headstock cnc lathe The used POLYGIM DIAMOND 42 CSL sliding headstock cnc lathe are a medium-sized 5-axis CNC machine particularly suitable for automatic lathes, in bar machini...

L. PONTIGGIA 3 QG 750x15500 THREE SLIDES BED CNC LATHE

• Manufacturer: Pontiggia Leopoldo

Complete with: - n. 1 four jaws table Ø 1.200 mm. - n. 1 automatic square turret - n. 1 closed steady - n. 4 open steadies - n. 1 boring support

Mori Seiki Lathe Zl150 SMC

• Manufacturer: Gobid
• Model: ZL-150SMC

n. 1 Mori Seiki lathe model Zl150 SMC, year 2000 - ref. 1- Complete with Iemca Bar Loader Model Boss 545/32L year 2003It is noted that the lathe's CNC does not start due to a fault (likely board failure)CE Declar...

2003 AVM ANGELINI OSCAR counter spindle motorized cnc lathe

Used AVM ANGELINI OSCAR counter spindle motorized cnc lathe The used AVM ANGELINI OSCAR counter spindle motorized cnc lathe is a fast CNC lathe with a small to medium size tilting bed, with ASA 6″ main spindle wi...

GILDEMEISTER NEF 710 x 3000 CNC LATHE

• Manufacturer: Gildemeister
• Model: NEF 710

Retrofitted in 2008. Complete with: - n. 1 four jaws table Ø 610 mm. - n. 1 self centering chuck Ø 315 mm. - n. 2 closed steadies - n. 1 open steady - chipconveyor

BIGLIA B 501 YS motorized counter-spindle CNC lathe

• Manufacturer: Biglia
• Model: B 501 YS

Used BIGLIA B 501 YS Sub-Spindle Motorized CNC Lathe The used BIGLIA B 501 YS sub-spindle motorized CNC lathe is a fast, small-to-medium sized, tilt-bed CNC lathe with an ASA 6" main spindle with a "C" axis, a FA...

MORI SEIKI SL 2500 Y-axis motorized CNC lathe

• Manufacturer: Mori Seiki

Used MORI SEIKI SL 2500 Y Y-axis motorized CNC lathe The used MORI SEIKI SL 2500 Y Y-axis motorized CNC lathe is a fast, medium-sized, tilt-bed CNC lathe equipped with a tailstock, a C-axis electric spindle, and ...

SPINNER TC77 SMCY counter spindle Y-axis motorized cnc lathe

• Manufacturer: Spinner

Used SPINNER TC77 SMCY counter spindle Y-axis motorized cnc lathe The used SPINNER TC77 SMCY counter spindle Y-axis motorized cnc lathe is a robust CNC tilting bed lathe with ASA 8″ size flat guideways, with BARU...

2008 YU SHINE YS VL 1200 ATC

• Manufacturer: YU SHINE

Type: CNC MOTORIZED VERTICAL LATHE | Conditions: Used | Status: Good | Type of control: Fanuc 0i-TC | Table diameter: Ø 1.250 mm | Max. load on table: 5.000 Kg | Max. swing diameter: Ø 1.600 mm | Max. turning di...

1998 CITIZEN CINCOM E32 sliding headstock lathe

• Manufacturer: Citizen
• Model: E32

Tornio automatico a fantina mobile Passaggio barra: 32 mm. Max avanzamento barra: 320 mm Max foratura/maschiatura: Ø 16mm/M12. Velocità mandrini: 130 a 6000 giri/min. Torretta utensili principale: 12 posizioni To...

LATHE BIGLIA B565YS

• Manufacturer: Biglia
• Model: B 565
• Spindle bore: 76 millimeter

MAIN SPINDLE MAX. BAR DIAMETER: 70 MM MAX. TURNING DIAMETER: 290 MM MAX. TURNING LENGTH: 560 MM SPINDLE NOSE: A2-6 SPINDLE POWER: 11KW SPINDLE SPEED: 40-4000 RPM C AXIS: 360° INC. INDEXING 0.001° TURRET NUMBER OF...