Used Broaching, Slotting in Germany

Lot Broaching Machine Accessories

consisting of various holders for broaching and grooving machines, as well as various broaching needles in different sizes

WMT MODEL 3 Broaching Needles

Groove widths: 10 - 12 - 14mm Diameter of guide bushings: 32 - 34 - 35 - 36 - 38 - 40 - 42 - 44 - 45 - 46 - 48 - 50mm Diameter 32 - 50mm Diameter of bushings Length 350 mm Groove width 10 - 12 - 14 mm Weight 20 ...

WMT MODEL 2 Broaching Pins

Groove widths: 4 - 5 - 6 - 8mm Diameter of guide bushings: 12 - 14 - 15 - 16 - 18 - 20 - 22 - 44 - 25 - 26 - 28 - 30mm Diameter 12 - 30mm Diameter of bushings Groove width 4 - 5 - 6 - 8 mm Weight 14 kg Dimension...

2005 HAHNDORF HRY 1200 Keyway Broaching Machine

Hydraulic keyway broaching machine HAHNDORF HRY 1200, horizontal version • Broaching groove width up to 25 mm, maximum tensile force 40 kN • Broaching length up to 1,200 mm, suitable for longer workpieces and s...

HAHNDORF SREF 32/10 Slotting Machine

Keyway shaping and broaching machine with accessories as shown. Groove width at slotting 32 mm Groove width when broaching 12 mm Stroke 330 mm Pulling force 3.0 t Total power requirement 1.2 kW Machine w...

Klopp 650 Horizontal Slotting Machine

• Manufacturer: Klopp

All technical data was researched, read or measured on site. No guarantee of completeness and accuracy. 1 machine vice, There is a loading service up to 3000 kg. For all other lots over 3000 kg, the buyer must ...

1956 FRÖMAG KZ32 Slot Drawing Machines

• Manufacturer: Fromag

Technical data Manufacturer: FRÖMAG Model: Concentration Camp 32 Machine number: 6630 /ASK-1 Groove width: approx. 32 mm Drawing length: approx. 320 mm Year of Make: 1956 Accessories: 2 cabinets, with rem...

1977 MENN KS5

• Manufacturer: EWMenn

Diameter range, blank: 1,2-6 mm | Shaft length under head: 3-50 mm | Output pieces/min: 2000 | Diameter range, head (max.): 12,5 mm

Press / broaching machine

• Manufacturer: nicht bekannt

pressure ca. 12 t distance between columns - mm stroke 300 mm total power requirement kW weight of the machine ca. t dimensions of the machine ca. m

WMW broaching needle for spline hub profile

• Manufacturer: WMW

Push broach for spline hub profile, broach, two-part WMW, SWZ GmbH 12.78x17 13x17H12x4D9 TGL 0-5471 used, checked!

Pressure broaching machine 160 mm

• Manufacturer: Pagus

Print broaching machine Blell KG H6 and H7 possible With tips and pressure bolts With 3 base plates (1x unmachined) Several hundred tools available, see sample photos ! used, tested !

WMW broaching needle for spline hub profile

• Manufacturer: WMW

Push broach for spline hub profile, broach WMW, SWZ GmbH 20.725x25 20,725x25H12x8H84K TGL 0-5471 used, checked!

WMW broaching needle for spline hub profile

• Manufacturer: WMW

Push broach for spline hub profile, broach WMW, SWZ GmbH 20.725x25 20,725x25H12x8H84K TGL 0-5471 used, checked!

WMW broaching needle for spline hub profile

• Manufacturer: WMW

Push broach for spline hub profile, broach WMW, SWZ GmbH 23.725x28 23,725x28H12x8D94K TGL 0-5471 used, checked!

WMW broaching needle for spline hub profile

• Manufacturer: WMW

Push broach for spline hub profile, broach WMW, SWZ GmbH 29x34.90 29x34.90 + 0.03x8.69 + 0.05 TGL 7815/01 used, checked!