Used Bottling Lines in Netherlands

Soudronic-Sargiani 4-20 liter square can line

• Manufacturer: Soudronic

Pre-owned manufacturing line consist of: Soudronic VEAW-K 50 welder, Sargiani expander, seam protection and oven, upender, Sargiani flanger & seamer for bottom, Sargiani flanger. The square can was used for white...

UN 20 liter conical pail line from MGR

Pre-owned manufacturing line for 20 LITRE conical pails. The line consists of, among others: ZHENGYI welder with 0.6 mm overlap, Jorson inside powder protection, ZHENGYI ouside lacquer unit, ZHENGYI induction cur...

Karges Hammer AGR 100

• Manufacturer: Karges Hammer

Tooling: 127 mm | Can / ends diameter minimum: 50 mm | Can / ends diameter maximum: 100 mm | Can shape: round | Speed (up to): 350 ends per minute

2020 Naroska 2pc manufacturing line for Tuna and Sardine cans

• Manufacturer: Naroska

Running condition as new machine: Sizes of cans that can be produced Dia 83x38 mm /D83x40 mm/D83x43 mm and ¼ Club x 27.80 mm. Sheet layout of each size (mm) (D83x38 & 40)- 0.16 mm x 950.50 x 993.25 (TFS ) /(D8...

PLUG LID diameter 175 mm production line

Quality used Lug Lid manufacturing line consisting of: KD2326 40 ton stripfeed press, Sargiani S 945 CM 2T curling-lining machine.

1977 Crabtree Marquess 4036 tandem printing line with LTG tunnel-oven

• Manufacturer: Crabtree

Pre-owned 2 colour printing line with LTG tunnel-oven of 15 meter length.

Compact manufacturing can making line canbody Ø 42 mm

Pre-owned line for Sweetened Condensed Dairy Blend (78 gram) canbodies, tops and bottoms. Diameter 42 mm, height 50 mm. Total installed base consist of: Krupp SDvt duplex slitter, Apolla blank transfer robot, Sou...

2012 Minster-Corima conversion line for Hansa and 99 mm EOE

• Manufacturer: Minster

Pre-owned production line for Hansa EO ends and round 99 mm EOE. Two presses Minster P2-75 with two Corima light tester, one Corima electrocoater and vertical drying oven existing of 2 lanes. Also available is th...

2006 LTG Mailander coating line with 36 meter tunnel-oven

Pre-owned varnishing line with type LTG 470 coater. Cooling zone is 6 meters long with double sheet stacking boxes. Incinerator also from LTG, running on Natural Gas, volume 10,000 Nm3/h. Total length of the line...

2008 Bünder & Schmitt MFL004

• Manufacturer: Bünder & Schmitt

"Fully automatic linear filling machine with stop star for product singularization. The machine was equipped by eccentric screw pumps which are servo driven. By couting the rotations the volume can steplessly be ...

1996 Mailander 466 coating line with 30 meter LTG tunnel-oven and incinerator

Pre-owned Mailander 466 Coater with feeder, type 760. The LTG gas fired drying oven has a total heating length of 30 meter and 6 meter cooling area. Furthermore there is a TNV afterburner from year 2006 and behin...

Karges Hammer endline for 99 mm sanitary ends (back-end)

• Manufacturer: Karges Hammer

Pre-owned two (2) units G1-105 compound liners and T2-105 electric vertical spindle ovens.

1981 Mailander 169 monocolour printing / coating line with 27 meter LTG tunnel-oven

Pre-owned 1-colour metal decorating press type 169 with Mailander 460 in-line coater. Cooling-zone is 6 meter long. On the LTG tunnel-oven are 2 burners and 2 heating zones.

1991 KBA 2-colour printing line with Mailander 469 coater and LTG tunnel-oven

• Manufacturer: Koenig Bauer

Pre-owned tandem metal decorating presses type 122A with Mailander 469 in-line coater. Presses are equipped with Epic alcohol dampening system from 2010 and KBA ERGOTRONIC ink control from 2013. LTG tunnel-oven i...

Industrial can manufacturing line D73

Pre-owned very well maintained can making line consisting of: Soudronic VAA K 50 welder with CAN MAN static convertor (YoM 2020), Mecatronic lacquering unit for inside and outside type VXL-IMA and curing oven and...