Used Processing in Canada

Day Ribbon Blender

-Sew-eurodrive motor: 330/575 V, 7.50 HP, 1720 RPM, -5/16 jacket thickness -3/8 shell thickness -Walls have an extension that can be taken off -Shipping dimensions: 48” width x 120” length x 66” height with base ...

Clamp on Mixer with Weg Motor

• Manufacturer: WEG

-0.750" shaft diameter needed -Phase 3 -HP: 0.33 -Volts: 575 -RPM: 1730 -Amps: 0.44

1,900 Litres stainless steel tank with mixer

• Manufacturer: Alfa-Laval

-500 US Gallon -ALFA-LAVAL Jacketed Stainless Steel Mixing Vessel -With Overhead Prop Mixer -80 psi. -Max steam pressure, plate reads 100psi @300F Max W Pressure -20f @100psi Min Des. -Ser. 14972.1 -Made in Canad...

970 Litres fibreglass tank with manhole on top

-3 stationary legs -Dome bottom -Flat lid with manhole -215 imp

Clamp Down Bag Filter

-Shipping dimensions: length 42" x width 15" x height 13" -Inlet / outlet - 2.5"

Twister T4 Trimmer

• Manufacturer: Twister

-Dimensions: 25" length x 15" width x 16.5" height -115 V -2A current draw -Blade motor: 200W/0.25 HP -Tumbler Motor: 6w/1/125 HP -5 inch discharge -speed control

Twister T2 Trimmer

• Manufacturer: Twister

Sterling motor -1 Hp -115/208-230 V -1 Phase -60 Hz -15.4/7.5-7.7 amp

2,200 Litres plastic storage tank with SS containment

-4' dia x 7' high plastic tank -5' x 6 1/2' x 32" deep SS containment tank -C/w Prominent metering pump -LAST USE: ACID STORAGE/WATER TREATMENT -3 IN STOCK

Ball transfer station

-24"x36" -30" high -On stationary legs that can adjust in height

Lightnin Mixer

• Manufacturer: Lightnin

-Manufacturer: Lightnin -IDENT NO: 809018 PSP -Volts: 115 -Cycle: 50/60 -Phase 1

Mixer with Stainless Prop

• Manufacturer: Baldor - Reliance

-Shipping dimensions: 120" length x 42" wide x 27" height -Each blade is about 22" long -Baldor Motor -3 Hp -575 volt

Hibon rotary lobe blower

• Manufacturer: Hibon

CATEGORY: Blowers/ fans Model SNH822 Serial 16170200 125 hp, 460 volt belt drive 3000 cfm @ 13"

GAST Regenerative Blower

• Manufacturer: Gast

-Manufacturer: GAST MFG Corp. -Blower: Model, R1102 -CFM OPEN 60/50 Hz -SN: 0592 -At 60 Hz: -Max pressure: 28.5 in H2O -Max Vacuum: 26.5 in H2O -At 50 Hz: -Max Pressure: 21 in H2O -Max Vacuum: 20 in H2O -Inlet/ o...

668 Litres False bottom fiberglass tank

-18" false bottom -Tank dimensions: 38" diameter x 36" tall -Lid half opens on top -Tank has dome bottom with 3" drain on bottom -147 imp

1080 litres flat bottom fiberglass tank

-Fiberglass tank -Flat bottom -Sight line on side -4 short stationary legs -Tank dimensions are 42" diameter x 48" tall -239 imperial gallons

3M 700A Packaging Machinery

• Manufacturer: 3M
• Model: 700A

Good condition 3M 700A Packaging Machinery available between 1999 and 2006 years. Located in USA and other countries. Click request price for more information.