Used processing in chugoku

BATTENFELD SPR125P UP-CUT PROFILE SAW 14539
- Manufacturer: Battenfeld
BATTENFELD MODEL SPR125P UP-CUT PROFILE SAW, S/N 9648-6740, 20″ LEFT TO RIGHT OPERATION, APPROXIMATE 16.5″ DIAMETER UP-CUT BLADE, 230mm X 90mm MAXIMUM PROFILE CROSS SECTION, 125mm MAXIMUM PIPE DIAMETER, 480 VOLT ...
Elk Grove Village, IL
Trusted Seller
45 Ton Battenfeld Injection Molder, Model 45/200/02/08/6/20
- Manufacturer: Battenfeld
- Model: 452000208620
45 Ton Battenfeld Injection Molder, Model 45/200/02/08/6/20 Used Battenfeld injection molder, model 45/200/02/08/6/20, 45 ton clamp force, 16" x 16" platen, 10" x 10" mold area with mold, Unilog 3000 controls, 46...
Cleveland, OH
Trusted Seller
85 Ton Battenfeld Injection Molder, Model BK850/200
- Manufacturer: Battenfeld
- Model: BK850200
85 Ton Battenfeld Injection Molder, Model BK850/200 Used 85 ton Battenfeld horizontal injection molder, model BK850/200, maximum platen opening of 12", maximum opening stroke (adjustable) 13.8", with Unilog 4000 ...
Cleveland, OH
Trusted Seller
Battenfeld 40 HP Granulator Grinder 14x20 Solid Rotor, 2 Blade Angle Cut
- Manufacturer: Battenfeld
- Model: 1420BP
“Tested” 🔥Battenfeld 40 HP Grinder 14x20 Solid Rotor, 2 Blade Angle Cut, 5/16 Screen 230V-460V Current Wiring is for 460/480 but the motor heaters are for 240V so if you keep it wired for high voltage you will ne...
$8,500 USD
Get financing
Est. $167/mo
Henderson, KY
Trusted Seller
60" Battenfeld Gloucester Three-Roll Vertical Sheet Stack - Model 2000
- Manufacturer: Battenfeld
- Model: Gloucester
60" Battenfeld Gloucester Three-Roll Vertical Sheet Stack - Model 2000 Used 60" Battenfeld Gloucester Three-Roll Vertical Sheet Stack - Model 2000 This used 60" Battenfeld Gloucester three-roll vertical sheet sta...
Cleveland, OH
2003 Battenfeld R1100/200
- Manufacturer: Battenfeld
– Injection Unit can be vertical or horizontal Size: 121 | Shot size: 4.32 oz. | Clamp style: Vertical | Platen size: 18.7" x 14" | Dbtb: 3.15" Tiebar Diameter | Daylight: Max 18.7 | Hko: Yes | Clamp type: Rotary...
Valley City, OH
Trusted Seller
1996 Battenfeld 1420 BP Granulator
- Manufacturer: Battenfeld
The 1996 Battenfeld 1420 BP Granulator is a reliable piece of recycling equipment designed for efficient material processing. This used granulator is powered by a 40 HP motor and features a 14" x 20" opening, ide...
$10,800 USD
Get financing
Est. $212/mo
Kentucky, USA
Trusted Seller
BATTENFELD BA-1000/315 CDC Tie Bar Nut Used
- Manufacturer: Battenfeld
- Model: BA 1000
Removed from: 110 Ton Battenfeld Injection Molding Machine Model: BA-1000/315 CDC Serial: 22841 Expedited shipping services are available upon request. All taxes due are the responsibility of purchaser. Vis...
$295 USD
Holly, MI
Trusted Seller
BATTENFELD BA-1000/315 CDC Tie Bar Nut USED
- Manufacturer: Battenfeld
- Model: BA 1000
Removed from: 110 Ton Battenfeld Injection Molding Machine Model: BA-1000/315 CDC Serial: 22841 Expedited shipping services are available upon request. All taxes due are the responsibility of purchaser. Vis...
$295 USD
Holly, MI
Trusted Seller
BATTENFELD BK-T 2000/630, 7.27 Oz Injection Unit USED
- Manufacturer: Battenfeld
7.27 Oz Shot Size 1.57" (40 mm) Screw Diameter 40,060 PSI Injection Pressure 7.09" Injection Stroke 280 RPM Screw Speed Removed from: 143 Ton Battenfeld Injection Molding Machine Model: BK-T 2000/630 Seri...
$2,250 USD
Holly, MI
Trusted Seller
BATTENFELD BA-1000/315 CD Tie Bar Nut Used
- Manufacturer: Battenfeld
- Model: BA 1000
Removed from: 110 Ton Battenfeld Injection Molding Machine Model: BA-1000/315 CDC Serial: 22841 Expedited shipping services are available upon request. All taxes due are the responsibility of purchaser. Vis...
$295 USD
Holly, MI
Trusted Seller
BATTENFELD GLOUCESTER 54" Wide
- Manufacturer: Battenfeld
Used 54" Wide Battenfeld Gloucester Co-Extrusion Sheet Extrusion Line, previously used for approximately 1200 lbs. per hour polypropylene sheet. Line consists of the following: (3) Acrison volumetric feeders with...
Hainesport, NJ
Trusted Seller
BATTENFELD GLOUCESTER MODEL 1428HD GRANULATOR 200 HP
- Manufacturer: Battenfeld
200hp Battenfeld Gloucester Granulator 14” x 28” Throat opening Three knife open rotor with slant cut is belt driven by a 200 HP Motor Feed hopper modified for conveyor feed and Includes pull rolls on the back...
New Jersey, USA
Trusted Seller
Battenfeld BK850/200 85 Ton Horizontal Injection Molder
- Manufacturer: Battenfeld
One (1) used Battenfeld Model BK850/200 85 Ton Horizontal Injection Molder. This unit features a maximum platen opening of 12", maximum opening stroke (adjustable) 13.8", complete with Unilog 4000 controller.
St. Petersburg, FL
BATTENFELD CM55 TWIN SCREW EXTRUDER 18510
- Manufacturer: Battenfeld
Used Battenfeld-Cincinnati model CM55 counter rotating twin screw extruder. S/N 2804784/010. Conical screw design. Barrel is electrically heated and air cooled in three zones with air blowers with .20 kw motors. ...
Elk Grove Village, IL