Used Tanks & Kettles in West Virginia, USA

Flocculation Tank 100 Gallon FRP Plastic Mix Tank

Plastic tank with mixer. Previously used in a belt press waste water application. 29" inside diameter, 34" diameter outside flange 35" deep 2-3/4" inside drain diameter. No mixer included.

Groen 40 Gal. Steam Jacketed Tilting Kettle

• Manufacturer: Groen

ITEM #: 17981 Used Groen 40 Gal. Steam Jacketed Tilting Kettle Hemisphere jacket (40PSI working pressure)Manual hand crank gear tilt26" bowl diameter3/4"NPT jacket connections with bottom drainPedestal floor moun...

Groen 30 Gallon Steam Jacketed Twin Motion Sweep Mix Vacuum Kettle Vessel

• Manufacturer: Groen

Serial No: 98023-1 National Board rated kettle is constructed from stainless steel with a bottom steam jacket. Product chamber is 24"Ø X 22" depth, 2/3 bowl jacket, 2"Ø bottom drain, manual tilt/dump wheel. Gaske...

225 Gallon Stainless Steel Tank

Open top. 225 Gallons 38" Ø, 46" Tank Height, 58" Overall Height (12" Legs)

918 Gallon Belding Fiberglass Insulated Mixing Tank

• Manufacturer: Belding Tank Technologies

918 gallon belding acid mixing frp dish bottom tank, insulated Order #24108-1, mfg date 05/2005. 60" inside diameter, 72" straight side, dished top and bottom, 10' overall height. Maximum service temperature = ...

17,234 Gallon Tank Containment Basin

All carbon steel construction. Dimensions: 16'-8"W X 44'-1"L X 3'-6"D. The containment basin is currently cut into (4) sections to accommodate shipping. *Assembly required - sections will need to be welded bac...

100 Gallon Carbon Steel Tank

Overall dimensions: 40x38x78. Weight = 503 lbs. Straight side = 50" Diameter = 24"

400 Gallon Stainless Steel Tank

3'-6"ø x 6'-0" tall, 79" overall height. Size (gallons): 400

Stainless Steel Liquid Tank – 30 Galllon

Stainless steel construction with a sloped bottom with side drain. Extended height loose-fitting top cover for additional venting of the tank. Tank dimensions: Ø29.5" X 12"H Height: 25" base to tank rim, 31.5" ba...

1,200 Gallon Stainless Steel Liquid Tank

Tank constructed of 304 stainless sheet (14Ga.). 70" Ø 81" Straight Side 42" Clearance below tank (3) 3" Sanitary Inlets 2.25" Sanitary Outlet Bottom of tank is slightly sloped.

Stainless Steel Liquid Tank – 30 Galllon

Stainless steel construction with a sloped bottom with side drain. Extended height loose-fitting top cover for additional venting of the tank. Tank dimensions: Ø29.5" X 12"H Height: 22.5" base to tank rim, 29" ba...

750 Gal. Stainless Steel Liquid Tank

• Manufacturer: Perry Products

This stainless steel constructed vertical tank is designed for internal heating or cooling of liquid contents. It is 5'Ø with a 5' straight side, flat top cover and a slight bottom cone with 2" center drain. Th...

Stainless Steel Liquid Tank - 200 Gallon

200 gallon working volume, 238 gallon flooded volume Tank is 36"Ø formed single wall with a 54"L straight side Flat top cover with opening for clamp style mixer (Mixer not included) Sloped bottom with center drai...

Stainless Steel Duplex Liquid Tank Assembly

Each tank measures 16" diameter with a 34" straight side. They hold a liquid capacity of 25 gallons each (both drains are currently connected). Multiple sanitary type side inlet ports and a 1½"Ø shared bottom dra...

2800 Gallon Carbon Steel Square Tank

Open top atmospheric tank. 384 Cubic Foot Square Tank 8' x 8' x 6' H (2) 4" Inlet Connections (2) 3" Outlet Connections Tank is partitioned in the middle, but the bottom 6" of the tank is open all the way across