Used Tanks & Kettles in Germany

15000 Liter insulated pressure tank, Aisi 304

remarks: Steel heating pipes 2" in the skirt below the bottom of the tank

63 liter insulated pressure tank, Aisi 316

max. allowable working temperature: 200 °C remarks: Tank was screwed to a suspension in a plant; brownish adhesions inside (probably lime)

600 liter pressure tank (separator), Aisi 316

max. allowable working temperature: 95 °C remarks: 2 support brackets, stainless steel; 1 piping inside the tank; small dents in the insulating jacket

2500 Liter pressure tank, Aisi 316 with propeller

Volume: 2.500 liter | Max. excess pressure: 1,0 bar | Stand type: legs | Quantity legs: 4 Piece | Diameter inside: 1.190 mm | Cylindrical height: 2.500 mm | Total height: 3.850 mm | Wall thickness bottom: 5 mm |...

250 liter heat-/coolable pressure tank, Aisi 304

max. allowable working temperature: 100 °C Temperature control cylinder (dj): double jacket temperature control bottom (dj): double jacket remarks: Manhole diameter 355 mm (manhole cover missing; could be purchas...

310 liter insulated pressure tank, Aisi 316

remarks: Test pressure: 1.5 bar; Test temperature: 127 ° C .; 1 step on the outside of the tank; 1 head hole diameter 300 mm in the top bottom; 2 welded brackets inside; small dents in the insulation jacket

100000 liter heat-/coolable pressure tank, Aisi 304

• Manufacturer: Apparatebau Nordhausen

max. allowable working overpressure (dj): 2.0 bar Temperature control cylinder (dj): half-coil remarks: The double jacket (615 liter) is divided into a total of 4 chambers

800 Liter storage tank with sight glass, Aisi 304

remarks: Diameter of hand hole approx. 350 mm; slight signs of corrosion inside

1000 liter tank, Aisi 304 with jet stream mixer

• Manufacturer: Ystral

remarks: Total height estimated (deviations possible); Agitator supports may need to be relined for installation; Diameter outlet end approx. 35 mm EX-proof: motor is ex-proof (compliance with the new ATEX direct...

650 liter electropolished rectangular pharma tank, Aisi 316

remarks: internal (moveable) fixtures; the outlet was probably fitted with a fitting, but this is no longer available (see photos)

735 liter mobile rectangular tank, Aisi 304

remarks: Basic dimensions inside approx. 950 x 950 mm; Frame, Aisi 304 with 4 plastic wheels; loose cover with central manhole diameter approx. 395 mm (manhole cover is also loose); Outlet approx. 175 x 175 mm wi...

Diesel tank 2000 L from ESE for sale

• Manufacturer: ESE

ESE diesel tank 2000 L in good condition used for sale. Content: 2000 L

710 liter insulated pressure tank, Aisi 316

max. allowable working temperature: 130 °C Technical documentation: drawing,German Technical Supervisory Association TÜV documents remarks: Attention: outlet fitting extends beyond foot ends (former foot extensio...

1100 liter insulated pressure tank, Aisi 316

• Manufacturer: Diessel

max. allowable working temperature: 130 °C remarks: Small dents in the insulation jacket; outlet fitting incomplete; one of the feet is pressed into the inner bottom (see photos)

Stainless steel tank 750l with pump control condensate vessel VA

• Manufacturer: Musterfirma

Condensate tank, food tank With pump, partial control 295 kg 1.0 x 1.0 x 0.75 m Various small differences in detail Please note that the colors on your screen may differ slightly from the original colors.