Used Tanks & Kettles in Germany

1330 liter pressure tank, Aisi 316

max. allowable working temperature: 150 °C remarks: Manhole diameter 350 mm; 2 support brackets, Aisi 316; 1 connection in the cylinder bent; Connections upper bottom: 1 x DN 100; 5 x DN 50; 2 x DN 25

10500 liter pressure tank, Aisi 304

• Manufacturer: Bolz

max. allowable working temperature: 20 °C Technical documentation: drawing,German Technical Supervisory Association TÜV documents,various documents remarks: 1 stainless steel sheet inside in the lower bottom (see...

2000 Liter heat-/coolable tank, Aisi 304

Temperature control cylinder (dj): half-coil temperature control bottom (dj): thermoplate notice: some residues of previous content, bump at the insulation jacket, pipe end cut flush remarks: Cone height approx. ...

3000 liter horizontal vakuum pressure tank, Aisi316

• Manufacturer: Capito & Assenmacher

max. allowable working temperature: 100 °C Technical documentation: German Technical Supervisory Association TÜV documents,various documents ,certificate of inspection

1830 liter insulated pressure tank, Aisi 304

• Manufacturer: Lechmann AG

max. allowable working temperature: 200 °C remarks: 1 Mannloch Durchmesser 500 mm im Frontboden; kleinere Beulen im Isomantel

100000 liter isolated storage tank, Aisi 304

• Manufacturer: Priamo Food Technologies

remarks: Manhole dimensions: 542 x 442 mm; outlet was cut off

1200 liter heat-/ coolable tank, Aisi 304

Temperature control cylinder (dj): thermoplate temperature control bottom (dj): thermoplate material temperatur control system: AISI 304 (V2A) 1.4301

2400 liter heat-/coolable tank, Aisi 304

Temperature control cylinder (dj): double jacket remarks: Manhole approx. 345 x 455 mm; 1 dent in the insulation jacket (see photos) material temperatur control system: AISI 304 (V2A) 1.4301

15000 liter tank, AISI304 with welded insulation jacket

notice: some residues of previous content, pipe end cut flush

1000 liter heat-/coolable tank, AISI 304

Temperature control cylinder (dj): double jacket remarks: Behälterauslauf ragt über Behälterfüße hinaus, Behälter müsste zur Aufstellung entsprechend unterfüttert werden; 1 loses Fußgestell aus Normalstahl gehört...

1250 liter insulated Cip-tank, Aisi 304

remarks: Slight differences in the design of the two tanks; dents in the insulation jacket of the lower bottom; 1 tank also has 1 dent in the insulation jacket in the cylinder area (this tank also lacks the spray...

2000 liter heat-/coolable tank, Aisi 316

Temperature control cylinder (dj): double jacket temperature control bottom (dj): double jacket remarks: Tank lid, Aisi 304; Tank with dents inside, tank lid bulging outwards (probably due to overpressure in the ...

27200 liter storage tank, Aisi 316

• Manufacturer: INOX - MAURER AG

notice: some residues of previous content, manhole cover plated remarks: Stand frame, Aisi 304; wall thickness of the lowest cylinder segment approx. 6 mm; 2 of these tanks are from the manufacturer Metkon, but a...

120 liter pressure tank, Aisi 304

remarks: 1 hand hole approx. 80 x 95 mm in the upper bottom; tank without outlet in the lower bottom; tank with smaller dents

1027 liter horizontal pressure tank, Aisi 304

remarks: Tanks lie loosely in frames, made of Aisi 304, which are screwed together in pairs; 1 hand hole each approx. 215 x 240 mm in the front bottom (plastic hand hole cover); 1 pipe inside; 2 tanks outlet inne...