Used Tanks & Kettles

30 gallon stainless steel jacketed kettle with copper dual/double action anchor type

(2) Each 30 gallon stainless steel jacketed kettle with copper dual/double motion anchor type scraper blades sweep mixer/agitator. Carbon Steel Jacket. Driven by 5/2.5/3 HP, 550 V, 1800/900/1200 RPM. Has tilt di...

500 Liters (130 Gal) Stainless Steel Sanitary Tank with Legs

Stainless steel construction. Tank is 36" inside diameter with a 24" straight side wall, top and bottom dished heads. Tank Wall Thickness: Cylinder: 0.090"; Heads: 0.102" Top-installed 12.5" X 18" hinged oval hat...

60 Gallon Stainless Steel Liquid Holding Tank Sloped Bottom

• Manufacturer: Ace Processing Equipment Co.

Serial No: 6959 Tank: 36" diameter X 16.5" at max. depth, 16Ga. sheet, top flanged drop-on cover Supported on three-point pipe sockets for 2"Ø legs (48" to top of tank). Installed sight level glass and 1"Ø sanita...

Stainless Steel Sanitary Horizontal Insulated Liquid Tank - 600 Gallon

• Manufacturer: Crepaco

Contructed of 347 stainless steel. Tank measures approximately 48" diameter X 8' long Overall dimensions: 110" L x 50" W x 72' H. Weight = 762 LBS.

Bendel Stainless Steel Mixing Tank - 2,000 Liter (550 Gallon)

• Manufacturer: Bendel, LLC

304 stainless steel, formed and welded flat-bottom holding tank (11GA stainless sheet) Ø54" X 60" straight side Flat top with twin hinged access panels and bridged support for a vertical-mount agitator, 18 RPM 1 ...

Cherry-Burrell Stainless Steel Sanitary Mix Tank - 280 Gallon

• Manufacturer: Cherry Burrell

42"Ø with 48" vertical straight side transitioning to a sloped bottom with a centered 3"Ø flanged sanitary drain bolted to a stainless steel base. Tank construction: 14GA. stainless steel with welds ground smoot...

15.9 Lee Mix Tank

• Manufacturer: Lee

This used 15.9-gallon Lee Mix Tank is built from T-304 stainless steel, ensuring durability and resistance to corrosion. This model 15.9 CBT, produced in 1995, features a bolted dome top with a cone bottom design...

1850 Gallon Stainless Steel Square Storage Tank

1850 Gallon Stainless Steel Square Storage Tank Capacity: 1,850 Gallons/250 Cubic Feet Dimensions: Tank Height: 8'-8" H x 72" x 72" Total Height on Legs/Stand: 158" (13'-2") Equipped with: (2) Monitor Techno...

800 Gallon Walker Equipment Sanitary Stainless Steel Insulated Liquid Tank

• Manufacturer: Walker

Tank constructed of 304 stainless steel. Tank has a 58" inside diameter with 72" straight sidewall and dished head bottom. Bolted top cover with hinged inspection panel and 2" ports. Constructed with approximatel...

Metalcraft TranStore 450 Gallon Liquid Tote Tank 316 Stainless Steel

• Manufacturer: TranStore

Tank is constructed of 316 stainless steel, 10 GA wall, 2B finish inside & outside. Radiused corners, non-pressure rated. 22.5" diameter drum cover top opening with gasket clamp ring. Bottom Drain: 1 ½"Ø sanitary...

Dual Chamber Stainless Steel Liquid Holding Tank - 670 Gallon Cap.

Construction: Formed and welded 14Ga stainless steel sheet (single wall), flat bottom with a hinged cover Combined capacity of 670 US Gallons- water-tight center divide provides an equal capacity of 335 gallons e...

15 Gallon Gas Fuel Transfer Tank

"ABSOLUTE", unused

1.5HP Stainless Steel Vertical Mix Tank – 250 Gallon

Single wall, 347 stainless steel alloy liquid mixing tank with welded dished heads top and bottom. Tank Cylinder: 42" diameter with a 38" vertical length, 0.180" wall thickness Bottom Drain: 2"Ø flange with ball ...

4,000 Gallon Mueller Jacketed Stainless Steel Tank 316 with Dike

• Manufacturer: Mueller

Serial number: 315042. Drawing on file. Vessel construction: 10GA 316L stainless steel with 2B (cold roll) finish on inside surface Design Pressure: 2psi @ 275°F Jacket Construction: 12ga carbon steel with 2" fo...

Industrial Air Inc. Stainless Steel Vertical Mix Tank - 750 Gal.

• Manufacturer: Industrial Air Inc.

All stainless steel formed and welded flat-bottom mix tank (11GA stainless sheet) Ø60" X 66" straight side Flat top with bridged support for a 1HP ProQuip agitator with 4-blade swept impeller 2"Ø bottom-side drai...