Used Processing in New Jersey, USA

Nash Pump-Vacuum Model: SC2SS with vapor recovery system - IPP# 207389

• Manufacturer: Nash

Nash SC2SS Vacuum pump, with vapor recovery system Test # 90Y002 The system includes the following equipment; a vacuum pump, two heat exchangers, a separating tank, and seal pots. The direct drive vacuum pump, is...

Still Stainless Steel 316 - IPP# 230720

• Manufacturer: Still

4700 lbs/hr Pure Steam Generator Falling film design to remove pyrogenic material Steam heated. Electricals rated 3.0 kW, 480 volt, 60 cyc, 5.2 amp with 0.5 kW 120 volt 4.2 amp, 60 cyc controls. All product surfa...

Low Temp Chiller 771,107 kcal/h (255 Ref. Ton) - IPP# 216002

• Manufacturer: Trane

CentraVac Low temperture, Series R chiller Drive motor: 197 kW, rated for 460 volt, 3 ph, 60 Hz Requires 705 lbs Evaporator rated for 40% Glycol at 428 gpm, inlet at 33.8 degrees F, and outlet at 25 degrees F. Co...

Hastelloy - C22 Heinkel HF800 Centrifuge-Inverting Filter - IPP# 203934

• Manufacturer: Heinkel

inverting filter centrifuge Rated 1150 RPM Solid Haynes Hastelloy C22 for all process parts 316SS for balance of exterior parts Clean in place nozzles for solids and filtrate housings Polished to 180 grit and ele...

Batch-Type Agitated Reactor 3,600 L (951 gallons) Stainless Steel Austenitic - IPP# 235800

• Manufacturer: Chema Balke Dürr GmbH

1.4529 SS (AL-6XN super-Austenitic SS) fermenter/ reactor with internal cooling coil and sparge ring for gas addition Polished stainless steel interior motor : 3/50/380 volt Bergmann double mechanical seal on sha...

Major Items Plastic Stainless Steel 316 - IPP# 205767

• Manufacturer: Rieter (Maag)

Type: Underwater strand pelletizer the vertical design provides space savings and easy access to the cutter head Designed to Process the following PET: Melt density 1.18 g/cm3, Solid density 1.34 g/cm3. Melt temp...

Stainless Steel 316 Centrifuge-Lab - IPP# 239309

Centritec Cell 8 single use insert centrifuge This type of flow centrifuge is for harvesting mammalian and insect cells in a single use insert. The system offers these advantages Single use, rapid changeover disp...

Stainless Steel 317 Andritz SZ400/2 Centrifuge-Pusher - IPP# 232767

• Manufacturer: Andritz

Duplex/317/316 stainless steel two stage pusher continuous centrifugeTwo stage pusher continuous centrifuge 5.5 ton/hour troughput of solids 10/130 degrees C cake thickness of outer basket 40mm (max) inner basket...

Batch-Type Agitated Reactor 34,069 L (9,000 gallons) Stainless Steel 316 - IPP# 246699

• Manufacturer: Industrial Alloy Fabricators

There are no man way covers for this vessel. Instead, this process required a ring and a single use rupture disk.

Batch-Type Agitated Reactor 34,069 L (9,000 gallons) Stainless Steel 316 - IPP# 246701

• Manufacturer: Industrial Alloy Fabricators

There are no man way covers for this vessel. Instead, this process required a ring and a single use rupture disk.

Stainless Steel 304 Praj Industries Tray Column - IPP# 235302

• Manufacturer: International Process Plants

process vent scrubbing column Thirty 304L SS sieve trays, spaced at 1' each,

Pump-Vacuum 779.8 m3/h (459 CFM) Carbon Steel - IPP# 221215

• Manufacturer: Kinney/Tuthill

screw type dry seal vacuum pump 0.05 ultimate pressure No oil or water with process contact and quiet operation less than 85 dB(A) Requires 2.6 gpm cooling water Direct driven by ac motor`

Pump-Vacuum 779.8 m3/h (459 CFM) Carbon Steel - IPP# 221214

• Manufacturer: Kinney/Tuthill

screw type dry seal vacuum pump 0.05 ultimate pressure No oil or water with process contact and quiet operation less than 85 dB(A) Requires 2.6 gpm cooling water Direct driven by ac motor

IPP# 602135, Solid State Polymerization Plant Polymers - Fibres and Plastics

70 TPD PET - SSP Plant It is a facility that manufactures high-IV PET chips suitable for various bottle production by reacting low-IV PET chips produced in a melt polymerization process in a solid state to have h...

Pump-Vacuum 779.8 m3/h (459 CFM) Carbon Steel - IPP# 221283

• Manufacturer: Kinney/Tuthill

screw type dry seal vacuum pump manufactured by Kinney/Tuthill 0.05 ultimate pressure No oil or water with process contact and quiet operation less than 85 dB(A) 4" suction flange, 2" discharge flange. Requires 2...