Used Processing in Aragon, Spain

STRAPPING MACHINE SORSA NOVA 801 05142

• Manufacturer: SORSA

Ref 05142 Machine STRAPPING MACHINE NOVA-801 Main Technical Data Operating speed 1,5 sec Package minimum size 60 mm Maximum strap tension 90 kg Strap size of 8 to 12 mm Coil inner diameter 200 mm Approximate weig...

SEMI-AUTOMATIC WRAPPING MACHINE 06430

• Manufacturer: CADET

Ref 06430 Machine SEMIAUTOMATIC WRAPPING MACHINE 1650 FOR PALLETIZED LOADS FOR USE WITH FILM OR NET Main technical features Pallet maximum height 1.900 mm maximum load weight 1.500 kg Turntable diameter Ø 1.650 m...

AUTOMATIC STRAPPING MACHINE FOR POLYPROPYLENE STRAP 06758

• Manufacturer: TP-601-D1

Ref 06758 Machine AUTOMATIC STRAPPING MACHINE FOR USE WITH POLYPROPYLENE STRAPPING Main Technical Data Strap tension of 7 to 70 kg Strap type PP (Polypropylene) Strap width of 8 to 12 mm Resistance welding Speed ...

ROTARY DRYER MACHINE ROLLWASH 180 LITRES INNER DIAMETER 1.030 MM 06710

• Manufacturer: ROLLWASH

Ref 06710 Machine ROTARY DRYER Capacity 180 liters Main Technical Data (Characteristics based according to technical data)

OIL SEPARATOR FILTER BEKO OWAMAT 6 06271

• Manufacturer: Beko
• Model: Öwamat 6

NO. 06271 Machine OIL SEPARATOR FILTER OIL SEPARATOR OWAMAT 6 Main technical features Condensate inlet (flexible hose) 3 x G½ (di=13 mm), 1 x G1 (di= 25 mm.) Max. inlet working pressure 25 bar (characteristics ba...

FUMES VACUUM CLEANER AZUR MECAZUR MOVABLE 1 PIPE 05378

• Manufacturer: Kemper

Zaragoza (Spain) Ref 05378 Machine FUMES VACUUM CLEANER Brand KEMPER Model AZUR –MECAZUR For welding fume extraction and filtration, dry powders and small particles MOVABLE OF 1 PIPE Main Technical Data Guide whe...

HEATING MACHINE WIND W-300 06418

• Manufacturer: WIND

REF. 06418 HEATING Machine Brand WIND Model W-300 W Series Industrial - Vertical Oil burner Main technical characteristics Heating capacity 333,400 Kcal./h. Power 348.9 kW Air flow 23.300 m3/h. Voltage III- 230/4...

WATER CHILLER MTA DE-170 06655

• Manufacturer: MTA
• Model: DE-170

Ref. 06655 Machine WATER CHILLER DE-170 Main Technical Data Power supply 400 V / 3 Ph / 50 Hz 400 V / 3 Ph / 50 Hz Air flow 1.020 m³/h / 17 m³/min 1.020 m³/h / 17 m³/min Installed power 3,60 kW 3,60 kW Maximum ap...

SCREW COMPRESSOR OIL INJECTION ATLAS COPCO GA-18 06614

• Manufacturer: Atlas-Copco
• Model: GA 18

Ref 06614 Machine SCREW COMPRESSOR OIL INJECTED Brand ATLAS COPCO Model GA-18 Main technical features Motor power 18,5 kW / 25 HP Maximum pressure 10 bar / 145 psi Air flow 32,7 l/s Noise level 73 dB(A) Oil capac...

ROTARY SCREW COMPRESSOR ATLAS COPCO GA-1208 06266

• Manufacturer: Atlas-Copco
• Model: GA 1208

174, 50013 Zaragoza (Spain) NO. 06266 Machine OIL-INJECTED ROTARY SCREW COMPRESSOR Brand ATLAS COPCO Model GA-1208 TECHNICAL FEATURES Dimensions (length x width x height)3.200 x 2.000 x 2.000 mm - Refrigerant dry...

REFRIGERANT DRYER BOGE DS22 06589

• Manufacturer: Boge

Ref. 06589 Machine COOLER Brand BOGE Model DS22 Main technical features Refrigerant circuit pressure design min / max.1,3 MPag / 2,2 Mpag 13 bar / 22 bar 189 psig / 319 psig Min / max air pressure : 1,1 Mpag / 1,...

2012 CHILLER CENTIOM SAB-HW18

• Manufacturer: CENTIOM

Available CENTION SAB-HW18 Absorption chiller machine in perfect condition. The year of manufacturing is February of 2012. It works with lithium bromide. Power: 633 kW Equipment ready to deliver to our warehouse.

2007 PUSKA SCREW COMPRESSOR + TANK TYPE PKE 7,5 DX 200L

Screw compressor on tank with dryer PUSKA PKE7,5 DX 200L, in very good condition, overhauled by our technical team. Technical Data - COMPRESSOR PUSKA PKE 7,5 DX 200L Screw compressor on tank with dryer PUSKA PKE ...

WOOD DUST COLLECTOR WOODMAN SDC-4043 07015

• Manufacturer: Woodman

Ref 07015 WOOD DUST Machine COLLECTOR SDC-4043 Main Technical Data Three-phase motor power 2,25 kW / 3 HP Main inlet diameter 1 x Ø 203 mm Inlet connectors diameter 3 x Ø 100 mm Air volume 4.757 m³/h / 2.800 cfm ...

PLASTIC INJECTION MOLDING DEMAG ERGOTECH COMPACT 150 NC-4 1500/610 06554

• Manufacturer: Demag
• Model: Ergotech

Ref. 06554 Machine PLASTIC INJECTION MOULDING ERGOTECH COMPACT 150 NC-4 1500/610 Main Technical Data CLAMPING UNIT 1500 Clamping force 150 ton Locking force 165 ton Maximum opening stroke 500 mm Max distance betw...