Used Processing in Saxony, Germany

DDR ORSTA hydraulics 10/16-63,2/3-1

• Manufacturer: Orsta

ORSTA hydraulics Hydraulic power unit hydraulic pump with control block used VEB hydraulics Schwerin TGL 10897 factory no. 1113501 220/380 V, 15,3/8,85 A, 50 Hz 4,0 kW, 1430 rpm Changes and errors in the technica...

HYDAC RFBNHC160 G20 A1

• Manufacturer: Hydac

HYDAC Hydraulic power unit used 380 V, 22 A, 50 Hz 11 kW, 1425 rpm Changes and errors in the technical data, and prices as well as subject to prior sale.

Rexroth DR 6 DP 2-21 / 150YM

• Manufacturer: Bosch - Rexroth

Hydraulic pump Sigma 1PF2G223/008RA01MS Hydraulic power unit 4 Kw hydraulic pump control valve nitrogen accumulator Rexroth 1PF2G223 used - hydraulic pump Rexroth Sigma type G2 - Rexroth 306-097 - drive motor KAT...

1988 electric heater for dryer 165kW #B10853

Heating capacity 165 kW Electric heater, air heater Manufacturer: Glatt GmbH Year of manufacture: 1988 Electric heater capacity 165 kW Air flow rate up to 20,000 m³/h Total dimensions approx. 3000 x 2200 x 2100 m...

Heraeus heating cabinet drying cabinet heating oven 250 °C #B11862

• Manufacturer: Heraeus - Hanau - Vötsch

Series 5000 up to approx. 250 °C Heraeus Oven, Drying Oven, Sterilizer, Incubator, Drying Oven, Used Nominal temperature up to approx. 250 °C Drying chamber approx. 360 x 420 H 340 mm Total approx. 710 x 480 H 52...

1989 Compressed Air Dehydrator Filter Liquid Separator Separator BZ Cyclone 50 #28040

• Manufacturer: Haub+Schöllnhammer

Haub+Schöllnhammer Betr.overpressure 16 bar BZ-Zyklon liquid separator separator separator for compressed air technology used installation length approx. 360 mm DIN2633, NW-DN65/76,1 , ND-PN16 with automatic arre...

1988 TMS VVP600

• Manufacturer: TMS

Volume flow: 1,800 - 3,600 m³/h Ventilator, Förder-Gebläse, fan used . 24330 7.50 kW / 2,800 rpm Dimensions Length 1,150 mm Width 600 mm Height 870 mm Drive motor MEZ 4AP 132S-2 380/220 V | 15.5/26.8 A | 50 Hz |...

1965 Centrifugal fan #25202

• Manufacturer: Kiefer

Power consumption 0.37 kW / 1,430 RPM Fan, ventilator, blower used . 25202 Dimensions Length 500 mm Width 650 mm Height 750 mm Drive motor Garbe-Lahmeyer 0IV 80 a-4 220/380 V | 2.7/1.55 A | 50 Hz | 0.55 kW | 1,4...

Venta GmbH MHI 25-50A

• Manufacturer: Venta GmbH

P(motor)= 11 Kw blower fan exhaust 4000 m³/h 11 Kwused V(n)= 3094 m³/Kw Inlet opening approx. Ø 250 mm exhaust opening approx. 280 x 180 mm Motor AEG 380/660 V; 22/12.7 A; 50 Hz Total approx. 900 x 850 x 850 mm P...

Ex Atex stainless steel tank 10,000 L with agitator paint powder mixer mixing tank #25749

Mixer tank capacity 10.000 liters Agitator motor Explosion-proof Ex Atex Stainless steel tank with agitator Color Powder mixer Mixing tank size Ø 2.000 mm height approx. 3.000 mm original motor of the agitator Ma...

Stainless steel tank 6500 L with agitator mixing tank insulated #26040

Tank dimensions height 2.50 m, Ø 1.90 m capacity approx. 6.500 l Mixing tank stainless steel tank with agitator , tank dimensions height 2.50 m, Ø 1.90 m mixing unit 4.0 kW / 43 rpm for molasses, beverages, AHL, ...

OIL diesel tank fuel tank 950l #26330

from HASER Hazard class A III, A 3 volume approx. 950 l Tank fuel tank used fuel tank hazard class A III, A 3 tank diameter approx. 1,10 m tank height approx. 1,0 m Changes and errors in the technical data, speci...

1988 PE plastic acid lye tank cistern black 9.7 m³ double tank water tank #B11434

RUEHL DN2000 H 3100 PE plastic acid caustic tank cistern black 9,7 m³ pressureless Use without overpressure or underpressure The tank is open at the top Total approx. Ø 2200 x H 3200 mm

1988 PE plastic acid lye tank cistern black 6.3m³ water tank #B11435

RUEHL DN1600 H 3150 PE plastic acid lye tank cistern black 9,7 m³liquid tank pressureless Use without overpressure or underpressure The tank is closed at the top and with flange connections. Total approx. Ø 1800 ...

Screw conveyor 1500 mm 1.1 kW #B17831

Stainless steel screw conveyor, feed screw, dosing screw used Conveyor length (from inlet to outlet): approx. 1.5 m Wing/tip thickness approx. 3 mm Wing height approx. 75 mm Stainless steel Drive with geared moto...