Used Presses in Baden-Württemberg, Germany

Perkin Elmer 25t press

• Manufacturer: Perkin Elmer

Perkin Elmer hand hydraulic press. 20 to. Analog display. Diameter of the pressing plate 90 mm. Weight: 36.8 kg. External dimensions: 48x38x19 cm.

WINERY XAG Press TYPE XAG

• Manufacturer: Weingarten

Specifications Press force: 10 t Sheet thickness: 1.5 mm Stroke rate: 180-550/min Plunger stroke: 25 mm

Transfer press line 300t - 3500t

New Transfer press line ISGEC 300t - 3500t, individually tailored to your needs with attractive conditions, excellent quality and manageable delivery times. Tell us what you need and we will make a corresponding ...

Tandem press line 300t - 2500t

• Manufacturer: ISGEC

New Tandem press line ISGEC 300t - 2500t, individually tailored to your needs with attractive conditions, excellent quality and manageable delivery times. Tell us what you need and we will make a corresponding of...

2001 Hydraulic press SACK & KIESSELBACH TRP 200

• Stroke length: 300 mm
• Daylight: 1,000 mm

Used hydraulic press SACK & KIESSELBACH TRP 200. The originally automatic transfer press was converted to manual in 2012, but can be converted again as an automatic press. The press is still set up and under powe...

1981 Hydraulic deep-drawing press LAUFFER 400t

• Stroke length: 800 mm
• Daylight: 850 mm

Second hand hydraulic (triple acting) deep drawing press LAUFFER 400t. The press is already dismantled and in excellent condition as it has been little used.

screw press

Nameplate not found, older, out of operation

2001 hydraulic brake press EHT Varioprest 85-25

• Manufacturer: EHT

max. working width: 2,550 mm, pressing force: 850 kN, driving power: 7.5 kW, with various bending tools, 1 workbench, approx. 200x70 cm, 2-section/1-door, door defective, 1 steel cabinet (green), 2-door

Four-column press SP 60 / 670 - Achtermann & Co. Stuttgart

Four-column press SP 60 / 670 - Achtermann & Co. Stuttgart -Press force 60 tons -Through clearance between columns 670mm -Through clearance between columns/side 400mm -Table size 900x750mm -Height opening 520mm -...

1996 Pneumatic-Hydraulic Press TOX PC 15

• Manufacturer: TOX

Press force: 155 kN, total stroke: 150 mm, ram stroke: 60 mm

Servo press 300t - 4000t

• Manufacturer: ISGEC

New Servo press ISGEC 300t - 4000t, individually tailored to your needs with attractive conditions, excellent quality and manageable delivery times. Tell us what you need and we will make a corresponding offer.

2021 Try out press 300t - 2500t

• Manufacturer: ISGEC

New Try out press ISGEC 300t - 2500t, individually tailored to your needs with attractive conditions, excellent quality and manageable delivery times. Tell us what you need and we will make a corresponding offer.

Progressive die press 350t - 1200t

• Manufacturer: ISGEC

New Progressive die press ISGEC 350t - 1200t, individually tailored to your needs with attractive conditions, excellent quality and manageable delivery times. Tell us what you need and we will make a correspondin...