Used Processing in Hamburg, Germany

1999 GMM Radia full-
- Manufacturer: GMM
- Model: Radia
Bridge saw - Refurbished with 6 months warranty. Installation and training can be carried out at extra cost. Maximum horizontal stroke 3800 mm Maximum vertical stroke 700 mm Maximum bridge travel 4300 mm Maximum ...
Hamburg, Germany
2020 GMM Lexta 36 FULL
- Manufacturer: GMM
- Model: Lexta 36
Bridge saw Completely overhauled in 2020 New PLC and state-of-the-art software installed Rated power: 22 kW Vertical disc diameter: 825 mm Vertical disc stroke: 420 mm Maximum cutting depth: 305 mm Tiltable verti...
Hamburg, Germany
2008 Donatoni Quadrix
- Manufacturer: Donatoni
- Model: Quadrix
Bridge saw with 3 axes Tilting table Z-axis 450 mm C-axis degrees -5° / +365° A-axis, degrees 0° / 90° 2000 x 3520 working area 2400 x 3800 (with Move system) Maximum diameter of the saw blade 625 mm Electric mot...
Hamburg, Germany
2008 WIRE ENGINEERING-COFIPLAST FALCON 93 C-
- Manufacturer: WIRE ENGINEERING-COFIPLAST
Multiwire 30 ropes Power 150 kW Voltage 380 V – 50 Hz Operating hours only 4,000 !!! Rope speed 0 – 33 m/s Rope speed inverter controlled (you can cut any kind and type of stone) Wire length 15,800 mm Installable...
Hamburg, Germany
2003 TERZAGO T 35 S-
- Manufacturer: Terzago
- Model: T35
Block cutter for marble/granite/onyx/basalt etc. Vertical saw blade diameter 3500 mm (maximum installable), minimum 2200 mm saw blade Cutting depth 1500 mm Vertical disc spindle stroke 1,900 mm Operating hours 9,...
Hamburg, Germany
2006 PELLEGRINI POLYWIRE 5.9 - Nr.1
- Manufacturer: Pellegrini
- Model: Polywire
Multiwire with 9 diamond wires Rated power: 37/50 kW Voltage: 380 V – 50 Hz Cutting dimensions: 2,100 mm (height) x 3,500 mm (length) Wire length: 24,500/25,400 mm Wire thickness: max. 8.3 mm Water consumption: 7...
Hamburg, Germany
2019 PTM Pieropan Telaio-
- Manufacturer: Pieropan
Special gang saw Usable cutting length: 3500 mm Usable cutting height: 2200 mm Usable cutting width: 300 mm Maximum number of saw blades: No. 4 (or No. 5 with tension reduced by 20% for a total of 36 tons) Saw bl...
Hamburg, Germany
2006 PELLEGRINI POLYWIRE 5.9 - Nr.2
- Manufacturer: Pellegrini
- Model: Polywire
Multiwire with 9 diamond wires Rated power: 37/50 kW Voltage: 380 V – 50 Hz Cutting dimensions: 2,100 mm (height) x 3,500 mm (length) Wire length: 24,500/25,400 mm Wire thickness: max. 8.3 mm Water consumption: 7...
Hamburg, Germany
2009 MEC C-400-90T-
- Manufacturer: MEC
Stone splitting machine 90 tons never used. Includes conveyor belt length 3 meters. Length of the splitting knife: 320 mm Splitting height: 400 mm Splitting force: 90 tons Maximum working pressure: 315 bar Upper ...
Hamburg, Germany
2000 CMPI ANTARES 2D+8A/800-
- Manufacturer: CMPI
- Model: Antares
Calibration and polishing machine for marble 2 calibration heads 8 polishing heads Max. working width: 800 mm Max. working thickness: 100 mm Min. working thickness: 10 mm Voltage: V/Hz 400/50 Calibration spindle ...
Hamburg, Germany
2009 Omag Blade NC 700-
- Manufacturer: Omag
CNC bridge saw with 5-axis head 1st bridge: 5-axis saw 2nd bridge: Vacuum suction cup for unloading Saw blade diameter 700 mm Y-axis approx. 15,000 mm X-axis 4,000 mm Z-axis 300 mm Underfloor saw NUM CNC control ...
Hamburg, Germany
2022 Fravizel Lynx + Halley MFCR 55
- Manufacturer: Fravizel
Mobile diamond wire saw on crawler undercarriage Built in 2022, start up in 2023 55 KW motor The upper rails are used for cutting blocks or walls. The wire saw moves along the approximately 8,000 mm long green un...
Hamburg, Germany
2012 R & R-Technik Volumen 20.000 Bm³/h
- Manufacturer: R & R-Technik
Large dust extraction system for a dry screen drum System without the drum, which is visible in the pictures. Exhaust air filter with an air volume of 20,000 Bm³/h Dust properties: dry, fine Raw gas dust content:...
Hamburg, Germany
2013 GMM ZEDA 38-
- Manufacturer: GMM
- Model: Zeda
CNC 5-Axis Bridge Saw - Refurbished with 6 months warranty. Installation and training can be provided at extra cost. Number 5 interpolated axes X – Y – Z – R – W Rotating head 0°÷370° Tilt head -15°÷ +105° Max. a...
Hamburg, Germany
2013 Montresor Lola 1000 – 3 MOTION
- Manufacturer: Montresor
- Model: Lola 1000
Edge polishing machine 3 Motion System Direction of rotation: inlet right, outlet left 8 face grinding supports, each 1.8 kW Conveyor belt with adjustable feed speed 300-3000 mm/min. Motorized height adjustment o...
Hamburg, Germany