Building Filters
- Trusted Seller
Fish slicer "Baader" 383
- Manufacturer: Baader
Fish slicer "Baader" 383 Technical data: - Type - 0383; - Machine number - 114912; - Current bell width spacing - 40 mm; - Fish length - up to 900 mm - Width of the fish top - 1,000 mm. - Depth of the fish top ...
Siemyśl, Poland - Trusted Seller
Baader 185 - a machine for filleting cod and salmon fish
- Manufacturer: Baader
- Model: 185
Overall dimensions: * Length – 6,900 mm; * Width – 1,860 mm; * Height – 1,500 mm. Technical specifications: * Operation – 1 person; * Suggested capacity – 24-32 fish/min (depending on fish size); * Operating cap...
Białokury, Poland - Trusted Seller
Fillet, degreaser, gutting machine for flat fish, flounder, etc. "BAADER" 170
- Manufacturer: Baader
Fillet, degreaser and eviscerator for flat fish-flounder, etc. "BAADER" 170 Dimensions: - Length - 2,500 mm; - Width - 1,150 mm; - Height - 1,800 mm. Technical data: - Service - 1 person; - Fish length - 25 -...
Siemyśl, Poland - Trusted Seller
"BAADER"175 - processing line for flounder and flatfish
- Manufacturer: Baader
- Model: 175
"BAADER"175 - processing line for flounder and flatfish Dimensions: - Length - 3,450 mm; - Width - 2,900 mm; - Height - 2,100 mm. Technical data: - Service - 2 people; - Maximum capacity - 40 fish/min.; - Wor...
Siemyśl, Poland - Trusted Seller
Separator for separating meat from bones, bones and tendons, "Baader" 697
- Manufacturer: Baader
- Model: 697
Separator for separating meat from bones, bones and tendons, "Baader" 697 Dimensions: * Length - 1.780 mm; * Width - 930 mm; * Height - 1.530 mm. Technical data: * Capacity - approx. 1,200 kg / hour (depending ...
Siemyśl, Poland 
1976 Baader 694
- Manufacturer: Baader
- Model: 694
Fully refurbished bone separator. Frame sandblasted and painted with two layers - primer and powder. All bearings and seals new. Drum after refurbishment with holes 3mm. New belt and scraper.
Bialogard, Poland
1993 Baader 60
- Manufacturer: Baader
- Model: 60
Fully refurbished circular knife sharpening machine. New stones, all parts inspected and replaced as needed.
Bialogard, Poland
2015 Baader 52
- Manufacturer: Baader
- Model: 52
A little used skinning machine only 185 working hours but It hasn't been used for 10 years so the bearings, chains, seals and rubber parts have been replaced as a preventive maintenance.
Bialogard, Poland- Trusted Seller
Baader 51
- Manufacturer: Baader
- Model: 51
The BAADER 51 is a skinning machine for fillets cut from white fish, blue whiting, halibut and red fish. This machine seizes the skin without initial cut from the tail end, i.e. right where the skin begins. Thi...
Warsaw, Poland - Trusted Seller
BAADER 221
- Manufacturer: Baader
BAADER 221 PELAGIC FISH PROCESSING LINE Best performance with a wide scale of opportunities The solution for pelagic processing has a wide range of possibilities. From manual fed heading and gutting to fully a...
Warsaw, Poland - Trusted Seller
Baader 187
- Manufacturer: Baader
- Model: 187
BAADER 187 Whitefish Filleting Machine This machine is designed to fillet cod, haddock, pollock, hake, white and other fish with similar bone structure. Fish with an overall length of 30-55 cm may be loaded on t...
Warsaw, Poland - Trusted Seller
Baader 185
- Manufacturer: Baader
- Model: 185
Baader fish filleting and skinning machine, type filleting machine: 185, type skinning machine: 51, plastic belt, belt width: (2x) 160 mm, s/s mesh belt, belt width: 365 mm, working width: 410 mm, working range o...
Warsaw, Poland - Trusted Seller
Baader 200
- Manufacturer: Baader
- Model: 200
Baader 200 Salmon filleting machine Good working order Video available on request Machine for producing fillet of salmon, trout and the same fish species. It processes gutted and headed fish with or without c...
Warsaw, Poland - Trusted Seller
Baader 605
- Manufacturer: Baader
- Model: 605
Baader 605 Soft Separator Superb condition Baader 605 from 2009. Ideal machine to process/separate many types of poultry, meat, vegetable and fish products. The capacity is up to 3.500 kg per hour. This partic...
Warsaw, Poland - Trusted Seller
1998 Baader 434
- Manufacturer: Baader
- Model: 434
The BAADER 434 is a unique heading machine for salmon and sea trout. Its result is a perfect U-cut which leaves the neck flesh on the trunk, increasing yield to the maximum.The cutting result is fairly independen...
Warsaw, Poland 
Baader 51 Fish Processing
- Manufacturer: Baader
- Model: 51
Good condition Baader 51 Fish Processing available between 1987 and 1989 years. Located in Netherlands and other countries. Click request price for more information.
Netherlands