Used Electrical Test Instruments in Dublin, Ireland

Keysight Technologies 11960A
- used
- Manufacturer: Agilent - Keysight
Details The Keysight (Agilent) 11960A is a microwave mixer for frequency conversion applications in RF and microwave systems. Operating from 2 GHz to 18 GHz, it supports IF outputs between 10 MHz and 500 MHz with...
Dublin, Ireland
Rohde & Schwarz ESI26
- used
- Manufacturer: Rohde & Schwarz
Details RENT Rohde & Schwarz ESI26 EMI Test Receiver ( call for availability ) The Rohde & Schwarz ESI26 EMI Test Receiver combines the high sensitivity, large dynamic range, and selectivity of a high-end EMI tes...
Dublin, Ireland
NoiseKen FNS-AX3-A16
- used
- Manufacturer: NoiseKen
Details The Noiseken FNS-AX3-A16 is an advanced Fast Transient Burst Simulator designed for complance testing in accordance with IEC61000-4-4 edition 2. This unit features Pulse Outputs up to 4.8 kV at 2 MHz Puls...
Dublin, Ireland
Rohde & Schwarz ESW26
- used
- Manufacturer: Rohde & Schwarz
- Model: ESW
Details ROHDE & SCHWARZ ESW26 The Rohde & Schwarz ESW26 is an EMI Test Receiver with outstanding RF characteristics, including high dynamic range und measurement accuracy. It meets the most stringent requirements...
Dublin, Ireland
Solar 9354-1
- used
Details SOLAR 9354-1 TRANSIENT GENERATOR The Solar 9354-1 Transient Generator was specifically engineered for pulse susceptibility testing on subsystems and equipment. With various accessories, including reactive...
Dublin, Ireland
Chase LFR1000
- used
Details The Chase LFR1000 delivers accurate low-frequency spectrum analysis from 9 kHz to 150 kHz, with a noise-floor sensitivity of –120 dBm and a dynamic range exceeding 100 dB. It features a 1 Hz resolution ba...
Dublin, Ireland
EMC Partner TRA2000IN6
- used
- Manufacturer: EMC
Details The EMC Partner TRA2000IN6 Transient Test System offers all the features of the TRA2000 and the TRA2000IN4, with the addition of ability to perform CWG 1.2/50 µ s open circuit and 8/20 s short circuit and...
Dublin, Ireland
SyntheSys Research BSA17500CSI
- used
- Manufacturer: SyntheSys Research
Details SyntheSys Research BSA17500CSi The SyntheSys Research BERTScope 17500CSi advanced the BERTScope Family to 17.5 Gb/s and covers today’s serial data interfaces from 1Gb Ethernet (GbE) to 10 GbE and are desi...
Dublin, Ireland
Haefely IP4A
- used
- Manufacturer: Haefely
Details The Haefely IP4A Capacitive Coupling Clamp is a capacitive coupling clamp for superposition of bursts on data lines in accordance with IEC/EN 61000-4-4. Features include: maximum cable size 40mm minimum t...
Dublin, Ireland
emtest UCS200N
- used
- Manufacturer: emtest
Details EMTEST UCS200N / EM Test UCS 200N The EM Test UCS 200N Ultra-Compact Simulator for Automotive Transients unifies the capabilites of an EFT/Burst simualtor, a Micropulse simulator and the required coupling...
Dublin, Ireland
emtest UCS500N5
- used
- Manufacturer: emtest
Details emtest UCS500N5 The emtest UCS 500N5 ultra-compact simulator is one of the most versatile testers to cover transient and power fail requirements according to international standards (basic and generic sta...
Dublin, Ireland
Haefely PSURGE 8000
- used
- Manufacturer: Haefely
Details RENT Haefely PSURGE 8000 (call for availability) The Haefely PSURGE 8000 Surge Platform Test System is a modular expandable system that grows with your application needs. The modular concept is built arou...
Dublin, Ireland
Emco 3816/2 SH
- used
- Manufacturer: Emco
Details The Emco 3816/2 SH single-phase Line Impedance Stabilization Network (LISN) covers 9 kHz to 30 MHz with a 16 A continuous current rating, featuring two lines (L+N) plus ground, Shuko connectors, a switche...
Dublin, Ireland
Haefely PCD130
- used
- Manufacturer: Haefely
Details Haefely PCD130 The Haefely PCD130 CDN, as part of the PSURGE 8000 system is tailored to meet IEC and EN standards to cover testing of 3 phase AC and DC power ports. These standards include recommendations...
Dublin, Ireland
Haefely PCD300
- used
- Manufacturer: Haefely
Details Haefely PCD300 The Haefely PCD300 CDN, as part of the PSURGE 8000 system is tailored to meet IEC and EN standards to cover testing of 3 phase AC and DC power ports. These standards include recommendations...
Dublin, Ireland