Used Electrical Test Instruments in Dublin, Ireland

Schaffner NSG2025-4

• Manufacturer: Teseq - Schaffner

Details The Schaffner NSG2025-4 is a high-end three-phase Fast Transient/Burst Generator, delivering up to 4.4kV pulse amplitude with a maximum burst frequency of 1MHz. It integrates a 30A coupling network and su...

Teseq (Schaffner) NSG 5600

• Manufacturer: Teseq - Schaffner

Details The Teseq Schaffner NSG 5600 is a precision EMC tester that generates synchronized, multi-channel automotive-specific waveforms including voltage dropouts, sinusoidal bursts, dips, ISO/SAE pulses, and mag...

Schaffner NSG3025

• Manufacturer: Teseq - Schaffner

Details The Schaffner NSG3025 Burst Generator offers a pulse amplitude range from 200V to 4.8kV ±10% (open circuit), with burst frequency adjustable between 0.1kHz and 1MHz ±2%. It supports 1 to 255 spikes per pa...

Rohde & Schwarz ESPI3

• Manufacturer: Rohde & Schwarz
• Model: ESPI

Details The Rohde & Schwarz ESPI3 is a 9kHz to 3GHz precompliance test receiver designed for EMI diagnostics across CISPR, EN, ETS, FCC, ANSI C63.4, VCCI, and VDE standards. It features five selectable detectors ...

EMCO 3810/2

• Manufacturer: Emco

Details The Emco 3810/2 Line Impedance Stabilization Network (LISN) is a dual-channel low pass filter engineered to isolate test equipment from external power sources while directing RF signals to a 50-ohm port. ...

Thermo Fisher Scientific EMCPRO PLUS

• Manufacturer: Thermo Fisher Scientific

Details Thermo Fisher Scientific EMCPRO PLUS EMC Test System The Thermo Fisher Scientific EMCPRO PLUS EMC Test System is a portable, multi-function EMC test system for pre-compliance, QA, and full certification...

emtest UCS500N5

• Manufacturer: emtest

Details emtest UCS500N5 The emtest UCS 500N5 ultra-compact simulator is one of the most versatile testers to cover transient and power fail requirements according to international standards (basic and generic sta...

EMCO 3115

• Manufacturer: Emco

Details The Emco 3115 Antenna is a linearly polarised broadband double ridged guide antenna covering 1 GHz to 18 GHz. It offers excellent gain, stable VSWR, and supports up to 300 W continuous power with 500 W pe...

emtest COMPACT NX7

• Manufacturer: emtest

Details EMTEST COMPACT NX7 Multifuntional Test Generator The compact Next Generation NX7 is the most versatile tester to address transient and power fail requirements for both international and commercial standar...

Teseq (Schaffner) NSG4070

• Manufacturer: Teseq - Schaffner

Details The Teseq NSG 4070 is a multifunctional EMC immunity test system covering a wide frequency range from 9 kHz to 1 GHz. It integrates a signal generator, three power meter inputs, and an internal amplifier ...

Hameg EMC Precompliance Set 2

• Manufacturer: Hameg

Details The EMC precompliance set EMC-SET2 includes all necessary instruments to analyse typical EMC problems. This set contains a spectrum analyzer HMS-X incl. HMS-EMC and HMS-3G option, a probe set HZ540, the H...

Keytek SERIES 2000

Details Keytek SERIES 2000 ESD Electrostatic Discharge The Keytek Series 2000 ESD Electrostatic Discharge hand-held or tripod-mounted test system provides a combination of performance characteristics that enab...

Schaffner NSG 651

• Manufacturer: Teseq - Schaffner

Details The Schaffner NSG651 Telecom Surge Generator delivers hybrid pulses of 1,2/50 µs up to 6,6 kV and 8/20 µs up to 3,3 kA, addressing IEC 801-5, ANSI‑IEEE C62.45 and VDE 0109 requirements. It also provides t...

Emco 3816/2 SH

• Manufacturer: Emco

Details The Emco 3816/2 SH single-phase Line Impedance Stabilization Network (LISN) covers 9 kHz to 30 MHz with a 16 A continuous current rating, featuring two lines (L+N) plus ground, Shuko connectors, a switche...

Rohde & Schwarz ESI26

• Manufacturer: Rohde & Schwarz

Details RENT Rohde & Schwarz ESI26 EMI Test Receiver ( call for availability ) The Rohde & Schwarz ESI26 EMI Test Receiver combines the high sensitivity, large dynamic range, and selectivity of a high-end EMI tes...