- Trusted Seller
Sandaerator on wheels AXMANN
used
- Manufacturer: Axmann
Type: PROSOMA, weight: ± 200 kg Motor SIEMENS type: OR49CH4, serial number: 965829, 5 Kw, 220/660 V On 2 steelwheels, with protection CE conform
Amel, Belgium 1991 AXMANN TURBOMIX TME 20
used
- Manufacturer: Axmann
Single-joint design, upright, dosing pumps and valves, sand dosing slide, mixing capacity approx. 20 t/h, mixing arm, radius 1.5 m, drive 22 kW, discharge height 1.9 m, connection 24 kW, control system, fast-loop...
Meinerzhagen, Germany
1991 AXMANN TURBOMIX TMS 10
used
- Manufacturer: Axmann
Double-joint design, upright, capacity approx. 10 t/h, throat depth 2.5 + 1.0 m, double mixing arm (premixer) 2x 2.2 kW, turbo mixer 7.5 kW, additive dosing pumps 2x 0.6 kW, PLC control system
Meinerzhagen, Germany1986 AXMANN TURBOMIX TMEG 10
used
- Manufacturer: Axmann
Double-joint design, upright, dosing pumps and valves, mixing capacity approx. 10 t/h, feed belt, radius 2 m, drive 1.5 kW, turbo mixer, radius 1.5 m, drive 18.5 kW, discharge height 2.4 m, swivel drive 2.2 kW, t...
Meinerzhagen, Germany
1987 AXMANN TURBOMIX TME 2
used
- Manufacturer: Axmann
Rigid single-arm design, stationary (upright), sand bunker, sand dosing slide, additive dosing pump and valves, mixing capacity 2 t/h, throat depth 1.0 m, drive power 4.0 kW, connected loads 380 V, 50 Hz, control...
Meinerzhagen, Germany
1979 AXMANN TURBOMIX TMV 5 CB
used
- Manufacturer: Axmann
Single-joint design, upright, dosing pumps and valves, mixing capacity 5 t/h, projection 2.5 m, discharge height approx. 1,200 mm, connected load 10 kW, connected loads 400 V, 50 Hz, control system
Meinerzhagen, Germany1984 AXMANN TURBOMIX TME 5/10
used
- Manufacturer: Axmann
Single-joint design, upright, dosing pumps and valves, sand dosing slide, mixing capacity approx. 5 t/h, mixing arm, radius 1.6 m, discharge height 2.25 m, connection 9 kW, control system, roller conveyor with vi...
Meinerzhagen, Germany
1989 AXMANN TURBO-Mischer TMG 20
used
- Manufacturer: Axmann
Double-joint design, upright, dosing pumps and valves, mixing capacity approx. 20 t/h, twin-shaft mixing arm, radius 4.0 m, drive 2x 3.0 kW, turbo mixer, radius 2.5 m, drive 15 kW, connected load 31 kW, connected...
Meinerzhagen, Germany
1983 AXMANN TURBO-Mischer TM 12
used
- Manufacturer: Axmann
Single-joint design, upright, capacity approx. 12 t/h, radius 2.5 m, double mixing arm (premixer) 2x 1.5 kW, turbo mixer 4 kW, additive metering pumps (1998), control system
Meinerzhagen, Germany
1978 AXMANN TURBOMIX TMV 5 B
used
- Manufacturer: Axmann
Single-joint design, upright, capacity approx. 5 t/h, throat depth approx. 2.5 m, premixer 1.5 kW, high-speed turbo mixer 5.5 kW, additive metering pumps, connected load 8.5 kW, control system
Meinerzhagen, Germany- Trusted Seller
1974 Impact breaker HAZEMAG AXMANN
used
- Manufacturer: Axmann
External dimensions: 2100 mm x 1150 mm, h. 1200 mm | Motor: 11 kW, 15 hp, 1460 rpm, 220/380 V | Opening: 500 mm x 400 mm | Rotor width: 450 mm
Amel, Belgium - Trusted Seller
Screw furan sand mixer AXMANN
used
- Manufacturer: Axmann
Type: GM 2-5, serial number: 5569 Year of construction: 2001, weight: ± 500 kg Useful length 1800mm Inlet sand 80x80mm, outlet Ø 120mm Screw Ø 200mm Special execution for Pep-Set Capacity 2 until 5 t/h (modificat...
Amel, Belgium - Trusted Seller
Small rubberbelt conveyor AXMANN, W500mm
used
- Manufacturer: Axmann
Axdistance 1500 mm, 4 rolls , band on feet With bunker
Amel, Belgium - Trusted Seller
Green sand mixer with wheels AXMANN 10 m³/h
used
- Manufacturer: Axmann
Motor 15 kw Outside dimensions: 1800mm x 1900mm | Useful dimensions: Ø 1800mm, h. 1150mm
Amel, Belgium 1984 AXMANN Fast-Loop No-Bake Molding System
used
- Manufacturer: Axmann
Mould frame max.1800x1200 mm, roller conveyor circulation system, pattern plate carrier, compaction table, sand bunker, dosing slide, continuous mixer, TMEG 20, 1984, 20 t/h, additive tanks (Alpha-Set), component...
Meinerzhagen, Germany
Tip: Enter manufacturer, model or keyword
