- Trusted Seller
Axmann Inclined Conveyor System with Master Drive Control – Industrial Material
- Manufacturer: Axmann
“““"Call for photos and specs number: 786/277/7843 Service, cleaned and tested. Large inventory of compressors, dryers, chillers, filters, conveyors and forklifts” 📋 Key Features to Include in Description • Fram...
$1,475 USDMiami, FL - Trusted Seller
Sandaerator on wheels AXMANN
- Manufacturer: Axmann
Type: PROSOMA, weight: ± 200 kg Motor SIEMENS type: OR49CH4, serial number: 965829, 5 Kw, 220/660 V On 2 steelwheels, with protection CE conform
Amel, Belgium 
1991 AXMANN TURBOMIX TMS 10
- Manufacturer: Axmann
Double-joint design, upright, capacity approx. 10 t/h, throat depth 2.5 + 1.0 m, double mixing arm (premixer) 2x 2.2 kW, turbo mixer 7.5 kW, additive dosing pumps 2x 0.6 kW, PLC control system
Meinerzhagen, Germany
1987 AXMANN TURBOMIX TME 2
- Manufacturer: Axmann
Rigid single-arm design, stationary (upright), sand bunker, sand dosing slide, additive dosing pump and valves, mixing capacity 2 t/h, throat depth 1.0 m, drive power 4.0 kW, connected loads 380 V, 50 Hz, control...
Meinerzhagen, Germany
1979 AXMANN TURBOMIX TMV 5 CB
- Manufacturer: Axmann
Single-joint design, upright, dosing pumps and valves, mixing capacity 5 t/h, projection 2.5 m, discharge height approx. 1,200 mm, connected load 10 kW, connected loads 400 V, 50 Hz, control system
Meinerzhagen, Germany- Trusted Seller
Screw furan sand mixer AXMANN
- Manufacturer: Axmann
Type: GM 2-5, serial number: 5569 Year of construction: 2001, weight: ± 500 kg Useful length 1800mm Inlet sand 80x80mm, outlet Ø 120mm Screw Ø 200mm Special execution for Pep-Set Capacity 2 until 5 t/h (modificat...
Amel, Belgium 
1978 AXMANN TURBOMIX TMV 5 B
- Manufacturer: Axmann
Single-joint design, upright, capacity approx. 5 t/h, throat depth approx. 2.5 m, premixer 1.5 kW, high-speed turbo mixer 5.5 kW, additive metering pumps, connected load 8.5 kW, control system
Meinerzhagen, Germany- Trusted Seller
1974 Impact breaker HAZEMAG AXMANN
- Manufacturer: Axmann
External dimensions: 2100 mm x 1150 mm, h. 1200 mm | Motor: 11 kW, 15 hp, 1460 rpm, 220/380 V | Opening: 500 mm x 400 mm | Rotor width: 450 mm
Amel, Belgium 
1983 AXMANN TURBO-Mixer TM 12
- Manufacturer: Axmann
Single-joint design, upright, capacity approx. 12 t/h, radius 2.5 m, double mixing arm (premixer) 2x 1.5 kW, turbo mixer 4 kW, additive metering pumps (1998), control system
Meinerzhagen, Germany- Trusted Seller
Moulding line for chemical sand FDC/AXMANN
- Manufacturer: Axmann
With sand regeneration With AXMANN- mixer 30 rpm, connection arm, pumps, cistern 2000 l With vibration table, robust roll conveyors 3 motorised transfer carriages With cooling vibrating conveyor, length 18 m With...
Amel, Belgium - Trusted Seller
Screw mixer AXMANN type SBS5 (slowly)
- Manufacturer: Axmann
Year of construction: 1976, serial number: 4504 Motor 2,7 KW, 3 hp, 380 V
Amel, Belgium - Trusted Seller
Screw mixer AXMANN 5 t/h
- Manufacturer: Axmann
External dimensions: length 2570mm, width 1000mm, height 2150mm Maximum output 5 t/h With 2 gear pumps drived by direct current motors controlled by potentiometer With Relais control board in the machine base Wit...
Amel, Belgium - Trusted Seller
Sandaerator AXMANN, capacity 12 t/h
- Manufacturer: Axmann
In good condition With 3 knives Rests on pins and envelope in the inside Can not be interchanged Projects the sand upwards Machine on wheels
Amel, Belgium - Trusted Seller
Small rubberbelt conveyor AXMANN, W500mm
- Manufacturer: Axmann
Axdistance 1500 mm, 4 rolls , band on feet With bunker
Amel, Belgium - Trusted Seller
Rubber belt conveyor, 4780 x 450mm, AXMANN
- Manufacturer: Axmann
Drum motor BAUER, 1,5 KW, 220/380 V Band width: 450 mm, speed: 1,05 m/s; on 16 rolls Can receive a wider belt
Amel, Belgium
Tip: Enter manufacturer, model or keyword
