- Trusted Seller
Sandaerator on wheels AXMANN
used
- Manufacturer: Axmann
Type: PROSOMA, weight: ± 200 kg Motor SIEMENS type: OR49CH4, serial number: 965829, 5 Kw, 220/660 V On 2 steelwheels, with protection CE conform
Amel, Belgium - Trusted Seller
1974 Impact breaker HAZEMAG AXMANN
used
- Manufacturer: Axmann
External dimensions: 2100 mm x 1150 mm, h. 1200 mm | Motor: 11 kW, 15 hp, 1460 rpm, 220/380 V | Opening: 500 mm x 400 mm | Rotor width: 450 mm
Amel, Belgium - Trusted Seller
Screw furan sand mixer AXMANN
used
- Manufacturer: Axmann
Type: GM 2-5, serial number: 5569 Year of construction: 2001, weight: ± 500 kg Useful length 1800mm Inlet sand 80x80mm, outlet Ø 120mm Screw Ø 200mm Special execution for Pep-Set Capacity 2 until 5 t/h (modificat...
Amel, Belgium - Trusted Seller
Small rubberbelt conveyor AXMANN, W500mm
used
- Manufacturer: Axmann
Axdistance 1500 mm, 4 rolls , band on feet With bunker
Amel, Belgium - Trusted Seller
Green sand mixer with wheels AXMANN 10 m³/h
used
- Manufacturer: Axmann
Motor 15 kw Outside dimensions: 1800mm x 1900mm | Useful dimensions: Ø 1800mm, h. 1150mm
Amel, Belgium - Trusted Seller
Moulding line for chemical sand FDC/AXMANN
used
- Manufacturer: Axmann
With sand regeneration With AXMANN- mixer 30 rpm, connection arm, pumps, cistern 2000 l With vibration table, robust roll conveyors 3 motorised transfer carriages With cooling vibrating conveyor, length 18 m With...
Amel, Belgium - Trusted Seller
Screw mixer AXMANN type SBS5 (slowly)
used
- Manufacturer: Axmann
Year of construction: 1976, serial number: 4504 Motor 2,7 KW, 3 hp, 380 V
Amel, Belgium - Trusted Seller
Screw mixer AXMANN 5 t/h
used
- Manufacturer: Axmann
External dimensions: length 2570mm, width 1000mm, height 2150mm Maximum output 5 t/h With 2 gear pumps drived by direct current motors controlled by potentiometer With Relais control board in the machine base Wit...
Amel, Belgium - Trusted Seller
Sandaerator AXMANN, capacity 12 t/h
used
- Manufacturer: Axmann
In good condition With 3 knives Rests on pins and envelope in the inside Can not be interchanged Projects the sand upwards Machine on wheels
Amel, Belgium - Trusted Seller
1979 Furan sand mixer AXMANN, 20 t/h
used
- Manufacturer: Axmann
Type: TMGV20, serial number: 4686 Construction year: 1979, weight: 3000 kg 27 kW kW in all, 500/380 V Articulation mix arms, the first arm is motorized, if overhauled, then with a stronger turbo motor In the cust...
Amel, Belgium - Trusted Seller
Mobil articulated arm screw mixer AXMANN, 10 t
used
- Manufacturer: Axmann
Dimensions: length 7200 mm, width 1900/1500 mm, height 3600 mm With rail trolley With sand hopper With pneumatic brake With 2 pneumatic slides for sand inlet
Amel, Belgium - Trusted Seller
1974 Transport chut AXMANN 2400 x 600mm,motor BOSCH
used
- Manufacturer: Axmann
Outside dimensions: 2550 x 1060 mm, Useful dimensions: 2400 x 600 mm 2 vibrating motors BOSCH type VFR60, 220/380 V, 2 x 400 W With 2 feet and rubber
Amel, Belgium - Trusted Seller
Furan sand molding carousel with mixer AXMANN, 20 t/h
used
- Manufacturer: Axmann
Type: TMVG 20, serial number: 4955 Year of construction: 1985, weight: ± 7500 kg Mixer with turbo screw, 860 mm, Ø 280 mm, motor 18,5 kW Height outlet: 2270 mm, filling height: 3350 mm, with premixing screw 1600 ...
Amel, Belgium - Trusted Seller
Shake-out grid AXMANN 900 x 900 x 600 mm
used
- Manufacturer: Axmann
On 8 springs, 2 belt driven Outside dimensions: 1000 x 950, h. 600 mm | Useful dimensions: 900 x 900 mm | Motor: 2,2 KW, 3 hp, 1420 rpm, 220/380 V
Amel, Belgium - Trusted Seller
Furansand mixer AXMANN 5 - 8 t/h, depends from motor/speed
used
- Manufacturer: Axmann
Type: TM 5, Serial number: 5435 Year of construction: 1979, Weight : ± 1800 kg 2 Premix screws with a final turboscrew is a swivel mix arm without articulation Without pumps, with command box With bunker ± 1,5m³ ...
Amel, Belgium
Tip: Enter manufacturer, model or keyword
