Used Drilling Rigs

1992 CME 75HT AUGER DRILL RIG #10533Tb

Manufactured 1992, mounted on 2018 Peterbuilt 337 truck with automatic transmission, 3 winch lines, wiggle tail, 25’ mast, Moyno 3L8 pump, breakout wrench, Cummins 6B (rebuilt 2021) Price: $225,000 CME 75HT

2014 CME 550X BUGGY DRILL RIG #863T

Manufactured 2014, approx 4720 hours, Cummins diesel engine, manual transmission, (3) winches (3200 lb, 7000 lb, 3200 lb), Moyno 3L8 pump, 140 lb auto drop hammer, rod clamp, breakout wrench, auger racks, rod sto...

2022 DIEDRICH D50 AUGER DRILL RIG #3388T

• Manufacturer: Diedrich

Manufactured 2022 (delivered 2023), John Deere 4-cyl engine, (3) winches plus wireline wince, 3L6 Moyno pump, SPT hammer, breakout, 120 gal water tank, mounted on rubber track carrier, remote control, fold down w...

1999 BAYSHORE 2T SPEED DRILL RIG #9519T

• Manufacturer: Bay Shore

Manufactured 1999, 24’ max depth, Mounted on 1999 International 4800 4 x 4 truck, PTO, 210 HP DT466E engine, Allison automatic transmission, 9000 hours, 59,000 miles, one owner/operator, 6 augers (12-25”) Price: ...

2024 SOOSAN JD1400E-II

• Manufacturer: Soosan

2023 Year – JD1400EII Rock CommanderHandles a 14’ft lead rod and changes 12’ft thereafter. Carries 86’ft of drill steel onboard. New Features: Operator Comfort – Enlarged operators cabin with movable drill contro...

INGERSOLL-RAND ECM350

• Manufacturer: Ingersoll Rand
• Model: ECM-350
• Drilling depth: 4.356 meter
• Mast Height: 5.753 meter

2.5 – 3.5 Inch Class VL140 Drifter Comes with 3 Air Compressors This is a Complete Drill Package with 3 Ingersoll-Rand Portable Air Compressors

2007 ATLAS COPCO ECM720

• Manufacturer: Atlas-Copco
• Model: ECM 720
• Horsepower: 384.8733394981728 horsepower
• Drilling depth: 29.5 meter

Montabert HC200A Drifter – ‘0’ hours on fresh service CAT Engine Set up for 60mm drill steel Onboard Air of 480 CFM @ 150 PSI 5500 total frame hours 2012 percussion hours w/ ‘0’ hours on new service. PRICED TO SE...

1999 CME 45C AUGER DRILL RIG #3298Tc

Manufactured 1999, 3 cyl 57 hp Duetz air cooled diesel engine, 2 winches, cathead, 140 # CME auto hammer, Moyno 3L6 pump, slide base, 300 gal water tank, front winch, toolbox mounted on 1995 Markooka MST 1100, 24...

1991 MOBILE B-57 AUGER DRILL RIG #8195T

Manufactured 1991, gas deck engine, 250 gal water tank, cathead, in/out and side to side slide base, no pump, no autohammer, mounted on 1995 Ford F700 single axle truck (not 4 x 4) with gas engine Price: $39,500

PORTADRILL RV6 DRILL RIG #3524T

• Manufacturer: Portadrill

Triple drum drawworks, 35” table opening, 6” x 18’ kelly, 35’ derrick, John Deere diesel engine, Sullair 375/125 air compressor (engine needs work), 6” centrifugal pump (removed, but available), mounted on Intern...

BUCYRUS ERIE 22W CABLE TOOL DRILL RIG #7315T

• Manufacturer: Bucyrus-Erie
• Model: 22W
• Mast Height: 12.192 meter

Mounted on 1979 Ford Louisville truck with gas engine, 6 cylinder Hercules gas deck engine, 2 rear manual jacks, fully tooled (3” and larger), sitting since 2019, does not run Price: $16,500 - Illinois BUCYRUS ER...

1999 CASAGRANDE B130 HYDRAULIC DRILL RIG #4684Tb

• Manufacturer: Casagrande

Configured for CFA and rotary, year 1999, Cat 3116T diesel engine (104kw), approx 27,000 hours, max torque 108 kNm, mounted on Cat 320 on Sempirana tracks. CFA: 1000mm max diameter, 17.5m (12m + 6m kelly extensio...

1998 GARDNER-DENVER 300

• Manufacturer: Gardner Denver

3.5” – 4.5” Inch Class CAT 3126 Diesel Engine Self-Contained Hydraulic Drill HPR1H Hydraulic Drifter New Injection Pump 2017 Handles a 20’ft starter steel Set up for T45 Low frame Hours Extendable Boom Dust Colle...

1994 INGERSOLL RAND A300 AUGER DRILL RIG #7309Ta

• Manufacturer: Ingersoll Rand

Manufactured 1994, 8873 hours, mounted on 2006 International 4300 truck with approx 89,200 miles, 2 winches, 3L6 Moyno pump, slide base with cross slide head, probe hammer, cathead, 10’ drill stroke, fixed monopo...

1994 INGERSOLL RAND A300 AUGER DRILL RIG #7309Tb

• Manufacturer: Ingersoll Rand

Manufactured 1994, approx 9000 hours, mounted on 2007 International 4300 truck with approx 98,500 miles, 2 winches, 3L6 Moyno pump, slide base with cross slide head, probe hammer, cathead, toolboxes, under deck a...

Ingersoll Rand ECM-490 Drilling Rig

• Manufacturer: Ingersoll Rand
• Model: ECM-490

Good condition Ingersoll Rand ECM-490 Drilling Rigs manufactured in 2006. Located in USA and other countries. Click request price for more information.