Used automated in Victoria, Australia

HARLAND 480
- Manufacturer: Harland
Slipring motor with 3.5inch Shaft 8" Long, double end shaft. Distence from ground to center of shaft is approx 480mm. Foot holes across the front is 820mm centre to centre Foot holes from front to back is 790mm c...
Melbourne, Australia
LDC AR33M10
- Manufacturer: LDC
SHORT SHAFT 3.5'' DIA X 5'' LONG Hp: 240 | Kw: 175 | Rpm: 585 | Mount: Foot | Voltage: 415v | Enclosure: DP | Rotor amps: 200 | Rotor volts: 520
Melbourne, Australia
SICME 315KL
- Manufacturer: SICME
DC Motor. KW 555 S1.duty. Frame NP 315KL. B3 RPM 1050. Arm V 450 Arm Amp 1295. Field V 190 Amp 16.5. YOM 1998. Shaft dia 100mm 2 units available.
Melbourne, Australia
A&D AD-4991-2515
- Manufacturer: A&D
Compact Food-Grade X-Ray Inspection Conveyor with Touchscreen This high-performance X-Ray inspection system is designed for food-grade applications, offering precision detection, reliability, and ease of use. The...
Melbourne, Australia
WEG K30 W22.
- Manufacturer: WEG
WEG 3 Phase Electric Motor. New and unused spares motor. 3 Phase, 415V, 11kW, 1470 RPM, 20.5A, 50 Hz. Foot mount. Unit runs well and insulation test passed.
Melbourne, Australia
ASEA MBRF 26
- Manufacturer: Asea
ASEA 55kw, 975rpm, 415v, 98 amp. Foot Mount Frame MBRF 26 (280 frame). Fitted with 9D section 460mm OD V pulley, Taper lock Bush 75mm. Megg tested 18/6/19 Very good.
Melbourne, Australia
SUMITOMO F18
- Manufacturer: Sumitomo
Magnetic separator, made by Sumitomo .Ideally used to remove metal from liquids. Main uses are removing the fine metal from cutting fluid. Drum Dia 140mm 180lt/min volume of flow. Highly efficient filtering accur...
Melbourne, Australia
TOSHIBA D315M
- Manufacturer: Toshiba
Toshiba 185kw (240Hp) 4pole (1450rpm) Electric Motor 95mm shaft, 330amp, 415V, 50Hz, IP56 Refurbished in 2015, 1800kg Excellent condition, Ex Spares Dept Motor.
Melbourne, Australia
LOMA iQ2
- Manufacturer: Loma
- Model: IQ2
Metal Detector Tube with Reject Gate. Drop through type. 100mm dia tube, Stainless steel ex Food factory Good working condition
Melbourne, Australia
TECO D355
- Manufacturer: Teco - Westinghouse
TECO Electric Motor 315kw, 985 rpm, 415V, 524amp, IP66 Looks to be new and unused, ex spares room motor. Excellent condition
Melbourne, Australia
POPE D280S
- Manufacturer: Pope Scientific
POPE Electric Motor 55kw, 980rpm, 415V, 93 amp, IP56 Excellent Condition
Melbourne, Australia
MATHER & PLATT C355M
- Manufacturer: Mather & Platt
On Centac Compressor Hp: 540 | Kw: 420 | Rpm: 2980 | Mount: Foot | Voltage: 415v | Enclosure: DP
Melbourne, Australia
CP D280M
- Manufacturer: CP
110kw, 4pole. EX QENOS Hp: 150 | Kw: 110 | Rpm: 1475 | Mount: Foot | Voltage: 415v | Enclosure: TEFC
Melbourne, Australia
BROOK D444
- Manufacturer: BROOK
NO FAN COVER Hp: 125 | Kw: 90 | Rpm: 1450 | Mount: Foot | Voltage: 415v | Enclosure: TEFC
Melbourne, Australia
AEI Products RW16862
- Manufacturer: AEI Products
RECO WESTINGHOUSE STATOR AMPS 913 Hp: 800 | Kw: 600 | Rpm: 1440 | Mount: Foot | Voltage: 415v | Enclosure: PIPE VENT | Rotor amps: 475 | Rotor volts: 778
Melbourne, Australia