Building Filters

39

Used automated in St. Gallen, Switzerland

  • Trusted Seller
    2015 HS AUTOMATION MS41OL

    2015 HS AUTOMATION MS41OL

    • Manufacturer: HS AUTOMATION

    - Hydraulic spreading process - Reel drive three-phase motor - Tape loop control Pull-off via preset pressure or via loop control - Coil stop arms 6 pieces with quick clamping system - Protective device against t...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    2000 BENELLI 650T/3MR/2/12/3750X1100/LD/ET3

    2000 BENELLI 650T/3MR/2/12/3750X1100/LD/ET3

    • Manufacturer: Benelli

    Press equipped with 2 feeing lines - one from the side for blank cutting in transfer mode and one in line for for progressive die operation.

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    1980 BETZ EZL 300

    1980 BETZ EZL 300

    • Manufacturer: BETZ

    approved for single stroke Safety valve make Herion Pneumatic clutch make Desch Motor grease - central lubrication ram weight - compensation cylinder Motorized height adjustment T-slots in the ram Freestanding co...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    2003 FEINTOOL MFA 1600

    2003 FEINTOOL MFA 1600

    • Manufacturer: FEINTOOL

    !! very well maintained machine !!! 2016 Overhaul by Feintool: + knuckle joint replaced + ram guides and roller shoe replaced + new base and table plate + new v-ring, counterholder and touch table piston + new ba...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    2007 HAAS VF-11B/40HE

    2007 HAAS VF-11B/40HE

    • Manufacturer: Haas
    • Model: VF-11B

    Under power A lot of tools Delivery to enduser 2008

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    2018 YASKAWA MOTOMAN MPL500 II

    2018 YASKAWA MOTOMAN MPL500 II

    • Manufacturer: Yaskawa - Motoman

    4-axis palletizing robot as good as new, never in use Payload 500 kg Up to 1200 cycles/hour Vertical reach 3024 mm Horizontal reach 3159 mm Weight 2300 kg 2 units available

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    2003 LOIRE SAFE EDIMR 800

    2003 LOIRE SAFE EDIMR 800

    • Manufacturer: Loire Safe

    Complete hot forming line (sheet metal application)consisting of: * Hydraulic press LOIRE SAFE 800 to. * Schwartz GA1534 furnace system: - max. lining width: 1.500 mm - Inner furnace length: 20.000 mm - Inner hei...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    1996 PLATARG 2513

    1996 PLATARG 2513

    • Manufacturer: PLATARG

    Can be tested in operation Max. Flywheel speed: 760 1/min. Capacity on one stage approx. 25T Clutch engagement max. 10/min Air pressure 5.5 bar (min) - 5.8 bar (max) Total deceleration time Braking <250 ms Zig...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    2002 FEINTOOL HFA 8800 PLUS

    2002 FEINTOOL HFA 8800 PLUS

    • Manufacturer: FEINTOOL

    Object: 36813 | Total force (nominal): 880 to | Stroke: 40 mm | Cutting velocity min.: 5 mm/s | Cutting velocity max.: 70 mm/s | Closing velocity: 200 mm/s | Returning velocity: 200 mm/s | Nominal force: 6...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    2001 LASCO TZP 1000 SO

    2001 LASCO TZP 1000 SO

    • Manufacturer: Lasco

    Complete hot forming line (sheet metal applications) consisting of: * 1000 to. hydraulic press LASCO * Schwartz furnace system: - max. lining width: 1700 mm - Furnace length: 27060 mm * Strothmann feeder * ABB lo...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    2007 FEINTOOL (SCHMID) HSR 1000

    2007 FEINTOOL (SCHMID) HSR 1000 ECO

    • Manufacturer: Schmid

    SIEMENS S7 300 controls Control Panel SIEMENS Panel PC 477B Switch on hours acc. to counter : 62'000 h Total strokes acc. to counter: 3 Mio including Coil line SCHMID HR 12

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    2001 FEINTOOL HLT 1250

    2001 FEINTOOL HLT 1250

    • Manufacturer: FEINTOOL

    Long table fineblanking press, specifically useful for progressive/transfer operations The press was only used rarely. Hours of operation: 4'682 Stroke count: 1.2 Mio

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    2001 ROVETTA S4-8000/4000X2000/E/ET

    2001 ROVETTA S4-8000/4000X2000/E/ET

    • Manufacturer: Rovetta

    Machine has been dismatled and is stored in a warehouse

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    2008 FEHLMANN PICOMAX 60 M

    2008 FEHLMANN PICOMAX 60 M

    • Manufacturer: Fehlmann
    • Model: PICOMAX 60 M

    With EROWA automation Clamping system: MECATOOL GPS 120 Equipment: - BLUM tool breakage monitoring - Fehlmann ATS 160 CNC rotary table - Filter system 600 l

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    2017 ITG 2-SPUR

    2017 ITG 2-SPUR

    • Manufacturer: ITG

    System consists of: + ITG ITPA 100k150 vertical induction hardening system, YoM 2017 150 kW, 100 kHz + BACHMANN automation cell, YoM 2017 + 2x ABB IRB 4600 handling robots, YoM 2017 load capacity 60 kg, additiona...

    Niederhelfenschwil, Switzerland
123