Used Processing in New York, USA

FIREX CUCIMIX 70L #14015

Firex Cucimix 70L, DOM 2012, Units are completely made of Stainless Steel, Kettle tilts and has water spout for filling, Electric Cookers, 3Ph, 240V, 50/60 Hz FROM 20C UP TO 200C, (2 Units Each Missing dashers)

OSCILLATING GRANULATOR MODEL YK 160 #14000

Oscillating Granulator Model: YK-160C The unit is constructed entirely of stainless steel. It has a production capacity of 50–200 kg/hr., and the rotor speed is 65 RPM. The motor power is 3 HP, 2.2 kW, 230/460, 3...

DOUBLE CONE SS 105 Cft BLENDER W/ PIN BAR #13939

Double Cone Blender 105 Cft, 304 Stainless Steel with SS Pin Intensifier Bar, Model 21010701 Hongda Industry, DOM 2021, Design Temp 200-degree Fahrenheit, 10 HP Motor, 230/460 Volt,26.7/13.4 Amp, 60 Hz, starter a...

ADMIX DYNASHEAR HIGH SHEAR IN LINE EMULSIFIER MODEL DS 850: DOM 2021 #13921

• Manufacturer: Admix

Admix Dynashear Model DS-850, High Shear Inline Emulsifier, DOM. 2021, Maximum flow rate @ 350 gallons per minute Axial top speed: 2650 feet per minute Axial diameter: 5.62 inches Radial diameter: 8.5 inches Seal...

JACKETED KETTLE SINGLE MOTION SWEEP WITH SCRAPERS #13874

Approximately 40 Gallon Stainless Steel Jacketed Kettle 27″ Diameter x 19″ Deep Single Motion Sweep Agitator with Scrapers 1.5″ Center Bottom Oultet with Valve On Stainless A-Frame.

STAINLESS STEEL KETTLE 15g W/DOUBLE MOTION SCRAP AGITATION #13867

Stainless Steel Kettle, Approximately 15 Gallon Stainless Steel Double Motion Kettle 18″ Diameter x 15″ Deep 3 Phase / 60 Cycle / 230-460 Volts

WILL FLOW 500g KETTLE NO AGITATION NB# 4269 #13835

Will Flow Stainless Steel Kettle 500g, Jacketed 55 PSI @300 F, NB # 4269, DOM 1981, Kettle # 35 no agitation

WILL FLOW 300g KETTLE SWEEP AGITATION NB# 4270 #13836

Will Flow Stainless Steel Kettle 300g Jacketed 55 PSI @ 300 F, NB # 4268 DOM 1980, Kettle # 29, Comes with Sweep Agitation, 3 HP, 3 PH, 230 Volt, 1725 RPM, 50/60 Hz

FELDMEIER 100 GALLON SS DIMPLE JACKET HIGH PRESSURE HOLDING TANK ON CASTERS #13561

• Manufacturer: Feldmeier

Feldmeier 100 gallon Stainless Steel Dimple Jacketed High Pressure 1994 Holding Kettle, this 90 PSI @ 300 degree, with MAWP is 45 PSI FV, has a National Board serial number of 455, vessel measures 43” Deep X 27” ...

HOBART MODEL A-200 PLANETARY MIXER #13422

• Manufacturer: Hobart

Hobart model A-200 planetary mixer, serial #11-374-337. Unit is equipped with 3 speeds, and is driven by a .5 hp 115-volt motor at 8.2 amps, 1725 rpms. Mixer comes with stainless steel beater & stainless-steel m...

JH DAY MODEL 10 RIBBON MIXER 36 CU. FT 316 SS #13405

J.H. Day Heavy Duty Double Ribbon Blender, Type 316 S/S, Model- D-10, 36 Cu. Ft. working capacity Heavy Duty Double Ribbon Blender, 40 Cu.ft. total capacity, 30″ wide x 78″ long, Type 316 stainless steel constru...

30 CFT. GEMCO DOUBLE CONE BLENDER #13043

• Manufacturer: Gemco

ONE USED 30 CFT. GEMCO DOUBLE CONE BLENDER, Features all stainless steel shell formerly in pharmaceutical service, shell is 56” ID and driven by bull and spur gear arrangement from falk gear reducer belt driven b...

SIFTER – SCREENER #11355

One Sweco type screener sifter, this screener is a model 30 inch. The unit is a Vibratory Screener, stainless steel, single deck. Unit comes with stainless steel contacts parts, 1/3 hp motor, 460/3/60 voltage. Un...

Paul Abbe 30 Cft All S/S DOUBLE CONE BLENDER #12893

ONE USED PAUL ABBE ALL STAINLESS-STEEL DOUBLE CONE BLENDER. This 30 Cft all S/S unit comes with Stainless Steel control panel with timer. Motor has motor brake, 230/460 Volt, 3 Ph, 50-60 Hz, 5 HP, AC motor. Unit ...

TWIN SHELL BLENDER ALL SS DOM 2010 10 Cft. VEE BLENDER W/I-BAR #14017

VANGUARD DOM 2010 Twin Shell Blender, Model V-10, All Stainless Steel, 10 Cf. capacity, 6″ Diameter Center Bottom Outlet with Butterfly Valve, 12″ Diameter Stainless Steel Covers, Intensifier Pin Bar, 3 Phase / 6...

Battenfeld Uni-Ex Extruder

• Manufacturer: Battenfeld
• Model: Uni-Ex

Good condition Battenfeld Uni-Ex Extruders manufactured in 1985. Located in USA and other countries. Click request price for more information.