Used Material Handling in Victoria, Australia

S/S Bin

Stainless steel open top bin on wheels. Flat bottom with a 60mm outlet and a ss ball valve. 1.1m x 700mm x 650mm deep.

INOX 1500

• Manufacturer: INOX

Stainless steel holding tank. Open top, flat bottom storage tank. 60mm outlet. 1150 mm dia x 1450mm straight side

APV Products 175K

• Manufacturer: APV Products

Used 175,000 Litre Insulated Milk silo. Built by APV Australia in 2006, this Silo was last used to hold Buttermilk. The Silo is free standing and secured to a concrete floor with the man whole and connection poin...

A & G ENGINEERING 1000lt

• Manufacturer: A&G Mercury

1000 lt stainless steel hoppers Complete with CIP washdown system, includes hopper stand with CIP pump. Hopper is placed on top and the pump circulates water up into the hopper via the lid attachment with spray b...

HOLSTEIN UND KAPPERT 840

• Manufacturer: HOLSTEIN UND KAPPERT

Stainless steel pressure tank. 8 bar pressure rating 840 Litres 1500mm straight side x 700mm dia, overall height 2.6m. Dished top and bottom. 4 inch outlet. Mounted on Stainless Steel legs. Site glass/inspection ...

APV Products 10KL

• Manufacturer: APV Products

APV Stainless steel insulated holding tank, built from 316L Stainless steel and has a holding capacity of 10,000 Litres. The tank was last used to hold an ACID solution in a dairy factory. Fitted with a 3" and 2"...

AGINOX 1027

• Manufacturer: Aginox

Stainless Steel (SS304) Jacketed Tank Fitted with floating lid Fitted with Temp Gauge, Level Indicator, sample take off point. Jacket is a 500mm high panel that wraps around the tank. 2 x 1inch outlets with valve...

Holding Tank

SS Holding tank. Open Top. Approximately 500 Litres. Sloped bottom to ball valve. Height 1.3m Previously used for adhesives.

SS Holding Tank

Stainless steel holding tank. 2500 Litres. Open top. Conical bottom. 2 Inch outlet with ss ball valve. Heavy duty casters and mounted to a steel frame. Tank height is 2.2 metres to ground. Tank dia is 1550mm Good...

SS Holding Tank

Stainless steel holding tank. Approximately 2800 litres. Conical bottom. 2 inch outlet with ss butterfly valve. 2 X 1.5 inch side ports. Manhole on top with lid. Mounted to steel frame with heavy duty casters. Ta...

SS Holding Tank

SS Tank on steel skid. 1600 Litres. Conical bottom. 2 inch outlet with camlock and ss ball valve. Manhole diameter 460mm. Tank has minor damage.

Camair Industries 2200

• Manufacturer: Camair Industries

Stainless Steel 2200Litres Closed top tank, conical bottom outlet (50mm), manhole in the top of the tank. Breather in the top of tank. On wheels, very clean inside. 1350mm dia x 2400mm tall. 2 available. Price pe...

FALLSDELL 800

• Manufacturer: FALLSDELL

Stainless Steel IBC for liquids. 800Litres 2inch outlet with valve. Closed top with manhole, stackable. Very clean inside, last used to hold cleaning solution

Hopper

Mild steel hopper, last used for sand. Approx 750 lt capacity 1.5m dia x 250mm straight side x 500mm cone on top and bottom. 2 inch gate valve at the top. Forklift pockets. 2 available, price per hopper.

Flexicon 300L

• Manufacturer: Flexicon

Mild steel live hopper with screw auger discharge. Stainless steel lid. Anti bridging hopper. 3 Phase 415V 1.5kW SEW geared motor. Mild steel screw with variable pitch and ribbon flighting. Screw operating at 16 ...