Industrial Automation » Actuators » Electric Actuators » Auma » Minnesota

Building Filters

5

Used Auma Electric Actuators in Minnesota, USA

  • AUMA SA14.5/GZ30 Electric Valve Actuator

    AUMA SA14.5/GZ30 Electric Valve Actuator – New Surplus

    • Manufacturer: Auma

    AUMASA14.5-216B/GZ30Multi-TurnElectricValveActuator-NewSurplus. Motor:ADL90-2/130,Voltage:460V/60Hz/3PH.,NEMA4Enclosure,HP:4,RPM:3360,FLA:7.6,LRA:47.9,NEC:G,Duty(Min.):30, OperatingTime:1733Sec.,Stroke:360/No.ofT...

    Minneapolis, MN
  • AUMA SA30.1-FA30 Electric Valve Actuator

    AUMA SA30.1-FA30 Electric Valve Actuator – New Surplus

    • Manufacturer: Auma

    AUMASA30.1-FA30Multi-TurnElectricValveActuator-NewSurplus. MotorP/NZ009.914,MotorModel:AD00160-2/215,Voltage:380V/50Hz/3PhDeltaor460V/60Hz/3PH.,NEMA4(IP67)Enclosure, HP:30,RPM:2800,FLA:65.0,LRA:370,Duty:S2-15Minu...

    Minneapolis, MN
  • AUMA SG10.1 Quarter-Turn Electric Valve

    AUMA SG10.1 Quarter-Turn Electric Valve Actuator – New Surplus

    • Manufacturer: Auma

    Qty1:AUMASG10.1Quarter-TurnElectricValveActuator-NewSurplus,RatedTorqueOutput:440Ft.-Lbs.Motor:SD50-4/60(140:1),PowerSupply:460V/60Hz/3Ph. HP:1/8,RPM:1680,FLA:0.6,LRA:0.9,NEC:C,Duty(Minutes):15,NEMARating:4/4X/6,...

    Minneapolis, MN
  • Auma SA25.1-54/FA25-B3 Electric Actuator –

    Auma SA25.1-54/FA25-B3 Electric Actuator – New Surplus

    • Manufacturer: Auma

    AumaSA25.1-54/FA25-B3ElectricActuator-NewSurplus. Motor:AD00132-4-140(Z043.502),7.5KW,4Pole,15MinuteDuty,460Volt/60Hz/3Phase,1680RPM. TorqueRange:460-1500Ft.-Lbs.,SettoClose:1500'#,SettoOpen:1500'#,Handwheel:400m...

    Minneapolis, MN
  • AUMA SA14.5-108B/GZ25-4 Electric Valve Actuator

    AUMA SA14.5-108B/GZ25-4 Electric Valve Actuator – NEW SURPLUS

    • Manufacturer: Auma

    AUMASA14.5-108B/GZ25-4ElectricValveActuator-NEWSURPLUS. Motor:ADL90-2/130,PowerSupply:460V/60Hz/3Ph.,HP:4,RPM:3360,FLA:7.6,LRA:47.9,NEC:G,Duty:30Minutes,NEMAEnclosure:4,OperatingTime:1733Seconds,Stroke:360/No.ofT...

    Minneapolis, MN

Overview

Electric actuators convert electrical energy into controlled linear or rotary motion for valves, attachments, and position control. In crawler loaders they provide precise blade tilt, quick coupler actuation, and attachment control with options for stroke length, force rating, and feedback. Choose sealed, high-IP units with suitable voltage, duty cycle, and feedback (encoder/potentiometer/CAN) to survive dirt, vibration and heavy cyclical loads in construction environments.

FAQ

What should I consider when buying an electric actuator for a crawler loader?

Match force (thrust/torque), stroke or rotation, mounting pattern, voltage and control signal type, duty cycle, IP rating, and feedback options. Verify mechanical fit, load capacity, and thermal limits for continuous operation.

How can I test a used actuator before purchase?

Power it with the correct voltage, verify full stroke/rotation under a representative load, check feedback signals, inspect seals and wiring, and listen for grinding or excessive noise.

How should an actuator be shipped to avoid damage?

Secure shaft and moving parts, drain fluids if required, protect connectors and wiring, crate or palletize with vibration padding, and insure the shipment. Use carriers experienced with heavy equipment parts.

What maintenance does an electric actuator need on a crawler loader?

Regularly inspect seals, connectors and mounting bolts, keep electrical contacts clean, check feedback calibration, and follow manufacturer lubrication intervals. Replace worn seals or brushes promptly.

How long do electric actuators typically last and what are failure signs?

Lifespan depends on duty cycle and environment; heavy-use units last several thousand to tens of thousands of cycles. Watch for slow movement, loss of holding force, erratic feedback, overheating, noise or fluid leaks.