New & Used Packaging Machinery in Sweden

Fill-Air NTS

• Manufacturer: Fill-Air

Manual From a simple push button operation the machine creates air filled bags instantaneously, operating at maximum capacity from the moment it is switched on. This information is prepared to the best of our abi...

Josef Kihlberg BPN

• Manufacturer: Josef Kihlberg

This information is prepared to the best of our ability - but not binding in detail. All prices are exclusive of VAT, subject to price/currency changes.

AW-4600FX #2755

• Manufacturer: Teraoka

For sale as a renovation object Every third time the gripper plastic breaks See more info in pictures

Traysealer Enterpack with Printer #2507

• Manufacturer: Enterpack

New potentiometer for speed control. Cleaned and adjusted air valves. Printer responds and runs but lacks ink. No vacuum, machine is used running on food grade gas. Tools: 195x150, 225x155 (oval), 230x190mm

Traysealer Tecnovac Olympia 210x140mm #2342

• Manufacturer: Tecnovac

Directed upper part. Refurbished plastic roller. Change the main switch. Adjusted circuit board for buttons. Change cover gasket. Change oil+filter in vac pump. Tool: 210x140mm

Vacuum machine Cryovac VC 14 RH #2273

• Manufacturer: Cryovac

Replace air distributor Replace welding tape Change the oil Fixed connectors for pinch protection Double weld + cut off

2008 Teraoka Digi AW-4600FX #2060

• Manufacturer: Teraoka

Test run OK

Traysealer Speedy V/G #2333

• Manufacturer: Ilpra
• Model: FOODPACK

Change oil, filter in vac pump. Adjusted tool. Straighten the big tool. Adjusted Weld plastic brake. Change a vacuum hose. Tool fabric: 260x160mm, 190x135mm

Double chamber Henkovac A-5000 -2008 #2215

• Manufacturer: Henkovac

Mounted cutoff on-off Replace main power switch Renovated welding beam The machine runs with an external vacuum pump or central vacuum (pump not included, can be purchased separately) Welding beam: 80x70cm The co...

2005 UVA Flash 250

• Manufacturer: UVA

Test run and adjusted welding times Works well Tube dimension: 156mm Welding width: 25cm Front cup missing, sensor bridged

Veripack Focus TF107 #2764

• Manufacturer: Veripack

New magnet clamp on door New connection contact on valve pack Made new door at the back New timing belt for payout General adjustment Test run done without issues Note: without vacuum pump Cable length: 170x270

Wrapper Digi AW-4600FX #2620

Tested, works great

Wrapper Digi AW4600 #2611

• Manufacturer: Digi

Tested and works well. The screen flickers a little, but works great.

Vacuum machine Röscher 65x80cm #2472

• Manufacturer: Röscher

Changed oil and oil filter. New locking mechanisms (x2) for the hatch to the engine compartment, 1 better used welding beam (modified), New welding wires and tape on the welding beams, New connectors to the weldi...

Hand Plaster #2463

Heating plate OK