Used Foundry & Casting in Germany

2003 Frech Espana DAW 125 PD SBC3

• Manufacturer: Frech

Used die casting machine DAW 125 with SBC3 control for the use of zinc alloys. Available as a basis for a general overhaul at the manufacturer's plant

1995 FRECH DAW 200S

• Manufacturer: Frech

Used die casting machine DAW 200 S with Datavario control for the use of zinc alloys. Available by arrangement The manufacturer recommends a general overhaul in the overhaul plant. This can be carried out on requ...

1999 FRECH DAM 315 S

• Manufacturer: Frech

Used die casting machine DAM 315 S with Datacontrol control for the use of magnesium alloys. Available from used machine stock. The machine is equipped with a Rauch type MMO 315E electric furnace. Without sprayin...

2017 ROBAMAT 2212

• Manufacturer: ROBAMAT

Used Robamat heating and cooling unit for use on die casting machines. This dual-circuit device is designed for the temperature control of a die casting tool with water. The device was checked, serviced and repai...

2007 FRECH Spraymotion 411 E

• Manufacturer: Frech

Used Spraymotion 411 E electric sprayer for use on die casting machines. The device is checked for function by the manufacturer. Including spraying and blowing bar (SR system with regulating nozzles) and stand 24...

2024 FRECH W20Zn-RC

• Manufacturer: Frech

Equipment of the machine 1.0.2 Closing part cover on the base frame for scales / chute 1.1.0 Motorized safety door in casting direction left 1.4.0 Machine bearings 1.5.4 Machine interior lighting 1.11.0 Equipment...

2024 FRECH W80Zn-RC

• Manufacturer: Frech

Equipment of the machine 1.0.2 Closing part cover on the base frame for scales / chute 1.1.0 Motorized safety door in casting direction left 1.4.0 Machine bearings 1.5.4 Machine interior lighting 1.11.0 Equipment...

2000 FRECH DAW 80S

• Manufacturer: Frech

Overhauled die casting machine DAW 80 GO on DataLogic control for the use of zinc alloys. Available on request.

2020 FRECH W50Zn-RC

• Manufacturer: Frech

Equipment of the machine 1.0.1 Locking part cover on the base frame 1.0.2 Closing part cover on the base frame for scales / chute 1.1.0 Motorized safety door in casting direction left 1.4.0 Machine bearings 1.5.4...

1992 FRECH DAW 50

• Manufacturer: Frech

Used die casting machine DAW 50 with SBC2 control for the use of zinc alloys. Available from used machine stock. The machine is equipped with a Rauch MO50E electric furnace and a used Oskar Frech 401 pneumatic sp...

2018 FRECH Z20/120C

• Manufacturer: Frech

Mint and unused machine furnace for DAW20A or DAW20S. The Metec furnace type Z20/120C has a durable stainless steel crucible. Crucible capacity is 420kg, melting capacity per hour 120kg/h at 21.5kW connected load...

1994 FRECH DAW 50

• Manufacturer: Frech

Used machine DAW 50 as a basis for a general overhaul without control cabinet, without oven and oven cabinet A general overhaul can be carried out at the manufacturer's overhaul plant. The scope of the overhaul c...

Mössner Gravity casting

• Manufacturer: Mössner - Rekord

Gravity casting systems for different processes and castings in highest performance as turnkey solution. Whether gravity chill casting or tilting chill casting with rotation of the mould by 90 ° or 180 ° – we sup...

Mössner HPDC high pressure die casting automation

• Manufacturer: Mössner - Rekord

Turnkey systems and individual components for die casting. Our systems technology and automation solutions take over the unloading from the casting machine, testing, cooling, sawing, deburring and mould spraying ...

Corner module cast iron

diagonal table extension flexible use as prism, support, stop, etc. With the DEMMELER corner modules, long profiles and beams can also be clamped on smaller welding tables - corner module placed in the corner and...