Processing » Hiroshima

Building Filters

611

Used Processing in Hiroshima, Japan

［Yaskawa Electric Corporation] General-purpose motors
- Manufacturer: Daiichi Bussan Co.
Power: 22Kw4P200V | Material: SS | Quantity saved: 1
Hiroshima, Japan
Sumitomo CHHM3-6160DC-AV-121
- Manufacturer: Sumitomo
2.2kw/4P/200V Deceleration ratio: 1/121 Power: 2.2kw/4P/200V | Material: SS | Quantity saved: 1
Hiroshima, Japan
Motor with cyclo reducer
- Manufacturer: Daiichi Bussan Co.
Reduction ratio: 1/273 Shaft diameter φ120 Power: 11Kw (1800rpm) 200V
Hiroshima, Japan
Mitsubishi XE-NE
- Manufacturer: Mitsubishi
0.4kw/200V d2G4, unused Power: 0.4kw | Quantity saved: 1
Hiroshima, Japan
1992 Tanabe CO-24
- Manufacturer: Made by Tanabe
24-inch type, top discharge type, with manual brake
Kure, Japan
2010 G-TECH 1456/3 type
- Manufacturer: G-TECH
Centrifugal effect: 3150G Left speed rotation: 4-48rpm Acceleration time: 2-3min Wetted parts: SUS316 Wear-resistant with 2 pumps. The product is made in Australia, but we provide full support. No operation panel
Kure, Japan
Hata Ironworks HU-RG
- Manufacturer: Hata Ironworks
Main electric motor 0.75㎾ Built-in motor with stepless speed change Main unit weight: approx. 180 kg This is a dry type granulator that crushes tablets and other solids to make them into dependable granules. This...
Kure, Japan
1985 Matsumoto Kikai MARK III 48×36
- Manufacturer: Matsumoto Machinery
Bottom discharge type Hydraulic system Hydraulic scraping device Main unit operation panel
Kure, Japan
For Asano Works ST-52
- Manufacturer: Asano Works
Seven stages, parts Material: SUS | Quantity saved: One | Size: Outer dimensions: 835 x 835 x 640H 830 x 30 x 7 sections
Hiroshima, Japan
2001 Flaker chip making machine
- Manufacturer: FLAKER
Manufacturer: FLAKER (Agency: Ryoki) 10mm screen with operation panel With blower With instruction Can be crushed into flakes. (Screen replacement) Please consider it as a mass processing machine.
Kure, Japan
Denyo DCX-270SSII type
- Manufacturer: Denyo
DC arc welder/AC generator Operation confirmed, please see picture for details.
Kure, Japan
2001 Nishizaki Technical Service SNFC
- Manufacturer: Nishizaki Technical Service
With tapping ball 4-point suspension type No suspension stand
Kure, Japan
2012 Hitachi OSP-7.5M6AN
- Manufacturer: Hitachi
Air-cooled, without dryer Power: 7.5KW 200V Pressure: 0.83Mps
Kure, Japan
NEWLONG DS-6
- Manufacturer: Newlong
Operation not tested Belt conveyor included Disassembled, cleaned, and operation checked
Kure, Japan
1993 Agitator-Transporter
- Manufacturer: Made by Sawada Kogyosho
Agitating fixed-volume transfer machine Teflon coated inside, for transferring powder and granular materials With variable speed dial Equipped with agitator blades and rotary valve Formerly used to transfer koji ...
Kure, Japan