Used in Piedmont, Italy

ZANI 220 Ton

• Manufacturer: ZANI

ZANI 320 tons

• Manufacturer: ZANI

Ton: 320 | Table - width (mm): 1600 x 1500 | Slide - stroke (mm): 300 | Number of strokes/min: 30 | Subtype (dm/cdc): DM2B | Ce mark: no | Conditions: working | Drive system (eccentric/link motion/knucle joint/h...

2000 BENELLI T 300 MR

• Manufacturer: Benelli

used double upright mechanical press Structure: Double upright | Press: Used | Sled power: 300 tons. | Push points: no. 2 | Working thickness: 12.5mm. | Number of strokes/min: 15 - 45 | Table size: 1,850 x 1,250 ...

BLISS S4-500

• Manufacturer: Bliss

Used double upright mechanical press Structure: Double upright | Press: Used | Boost:: 500 tons. | Push points: N° 4 eccentric connecting rods | Sleigh ride: 475mm. | Slide adjustment: 600 mm. | Strokes per min: ...

1999 PRESSIX 50 CNR 4

• Manufacturer: Pressix

Used mechanical swan neck press Structure: Eccentric swan neck | Press: Used | Boost:: 50 ton. | Push points: n° 1 | Model:: 50 CNR 4 | Kinematics: Eccentric | Sled size: 300mm x 450mm | Table size: 530mm x 770mm...

WORONEZ 800 ton mechanical press.

• Manufacturer: Woronez

Used double upright mechanical press Structure: Double mount | Press: Used | Boost:: 800 tons. | Push points: no. 2 | Table size: 2,500 x 1,600 mm. | Sled size: 2.300 x 1.400 mm. | Sleigh ride: 320 mm. | Slide ad...

1984 SMG HZPU 500

• Manufacturer: SMG

Used double upright hydraulic press Structure: Double upright | Press: Used | Maximum upper slide pressure: 500 tons. | Maximum slide pressure higher: 500 tons. | Push points: n ° 2 | Max vertical light.: 1,430 ...

NORTH reel 30 q

• Manufacturer: NORDA

Decoiler - max.: 40 q. | Decoiler - hydraulic expansion: Here I'm | Uncoiler - presser arm: Not present

NORDA grille 650 x 3mm.

• Manufacturer: NORDA

Max width tape: 650 mm. | Max thickness tape: 0.5 - 3mm | Number of rolls: no. 9 | Diameter of the rollers: 60 mm.

ESIMEC calender 1.000 x 3mm.

• Manufacturer: ESIMEC

Max width tape: 1,000 mm. | Max thickness tape: 0.5-2.5mm. | Diameter of the rollers: 80 mm. | Number of rolls: n° 9 | Introduction ramps: Present

DIMECO calender 600 x 3 mm.

• Manufacturer: Dimeco

Sheet passage width: 600 mm. | Max thickness tape: 0.5-3mm | Diameter of the rollers: 60 mm. | Number of rolls: number 11 | Number of traction rollers: no. 2+2

JOINT calender 1.250 x 3 mm.

• Manufacturer: Joint

Sheet passage width: 1,250 mm. | Max thickness tape: 0.5 - 3mm | Diameter of the rollers: 90 mm | Number of rolls: no. 9 | Number of traction rollers: no. 2 | Introduction ramps: Plumbing present

Servopresse calender 300 x 3 mm.

• Manufacturer: Servopresse

Sheet passage width: 300 mm. | Sheet metal thickness: 0-3mm.

1997 MOSSINI PO/2M/P1000

• Manufacturer: Mossini

Maximum slide pressure higher: 1,000 tons. triple effect | Push points: n° 4 piston plus 2 internal slide | Sleigh ride: 1,250 mm. | Vertical light max.: 1,800 mm. | Table size: 3,400 x 2,200mm. | Sled size: 3,4...

EMANUEL DEA 640/3200

• Manufacturer: Emanuel

Maximum slide pressure higher: 640 tons. | Sleigh ride: 2 pistons | Maximum vertical light: 1,000 mm. | Table size: 1,800 mm. | Slide size: 3,200 x 2,000mm. | Stripper table size: 3.200 X 2.000mm. | Slide approa...