New Materials Testing in Gauteng, South Africa

Buckling behaviour of bars (WP 120)
- Manufacturer: Labequip
investigation of all relevant buckling problems Description: In engineering mechanics, loss of stability is known as buckling. The bar axis laterally deflects under the effect of compressive forces and with incre...
Alberton, South Africa
Travelling Beam Device (UTAS-2125)
- Manufacturer: Labequip
Design and Testing of Bituminous Mixtures Description: The UTAS-2125 Travelling Beam Device is used to check for any irregularities in both concrete and bituminous road surfaces. Deviation of the surface from a s...
Alberton, South Africa
Distance Pieces and Platens for Frames (UTCM-4630)
- Manufacturer: Labequip
Compression and Flexural Machines Product Code: Distance Pieces for Frame: Due to the modular design of the frames any sample with suitable size, load and pace rate can be test on both chambers by decreasing the ...
Alberton, South Africa
Deformation of frames (SE 110.20)
- Manufacturer: Labequip
principle of virtual work to calculate the deformation and support reaction in a statically indeterminate system Description: A frame is a bent beam with rigid corners which creates a so-called structure gauge. T...
Alberton, South Africa
Hertzian pressure (TM 262)
- Manufacturer: Labequip
demonstration of the contact area under Hertzian pressure Description: When two bodies with a convex surface are pressed against each other, ideally, these bodies only come into contact linearly or at one or more...
Alberton, South Africa
Torsion of bars (SE110.29)
- Manufacturer: Labequip
elastic torsion of a bar under a torque Description: Torsion occurs primarily on axles and drive shafts in motor vehicles and machines. The torsion occurring in the shaft cause cross-sections of the shaft to be p...
Alberton, South Africa
Investigation of simple stability problems (SE 110.19)
- Manufacturer: Labequip
representation of simple stability problems on a buckling bar Description: Buckling is a stability problem which occurs in practice when slim components are subjected to compressive loading. Following a “disturba...
Alberton, South Africa
FULLY-AUTOMATED RESILIENT MODULUS UNIT (LoadTrac II-RM)
- Manufacturer: Geocomp
Advanced Soil Systems Geocomp’s LoadTrac II Resilient Modulus unit fully automates resilient modulus tests on base/subbase/subgrade materials. The LoadTrac II meets or exceeds all specifications for Resilient Mod...
Alberton, South Africa
FULLY AUTOMATED CONSOLIDATION & SWELL SYSTEM (LoadTrac III (Mini-LoadTrac)
- Manufacturer: Geocomp Corp.
Advanced Soil Systems ASTM D-2435 Incremental Consolidation AASHTO T-216 Incremental Consolidation ASTM D-4546 One dimensional swell or settlement potential of cohesive soils LoadTrac III system for incremental c...
Alberton, South Africa
FULLY-AUTOMATED PERMEABILITY SYSTEM (LoadTrac II, FlowTrac II)
- Manufacturer: Labequip
Advanced Soil Systems ASTM D-5084 – Flexible wall permeability ASTM D-2434 – Rigid wall permeability The LoadTrac II/FlowTrac II flow pump provides a unique and versatile way to run flexible wall permeability tes...
Alberton, South Africa
Melting Pot (UTC-1070)
- Manufacturer: Labequip
Hardened Concrete Testing Product Codes: Description: The Melting Pot is designed for melting capping compound, sulphur, wax and similar materials. The melted paraffin wax is used to seal soil samples and other m...
Alberton, South Africa
TRL DCP – DYNAMIC CONE PENETROMETER (LES-DCP)
The TRL Dynamic Cone Penetrometer (DCP) Supplied by Laboratory Equipment Supplies is an instrument designed for the rapid in-situ measurement of the structural properties of existing road pavements constructed of...
Alberton, South Africa
FULLY-AUTOMATED CYCLIC TRIXIAL SYSTEM (LoadTrac II, FlowTrac II Cyclic)
- Manufacturer: Labequip
Advanced Soil Systems ASTM D-3999 Determination of the Modulus Properties ASTM D-5311 Load Controlled Cyclic Triaxial Testing of Soils The LoadTrac II/FlowTrac II Cyclic system automated test unit completely auto...
Alberton, South Africa
FULLY AUTOMATED UNCONFINED COMPRESSION SYSTEM (LoadTrac II)
- Manufacturer: Labequip
Advanced Soil Systems ASTM D-2166, AASHTO T-208 Unconfined Compression Testing of Soils ASTM D-1663 Compressive Strength of Moulded Soil-Cement Cylinders Description: The LoadTrac II load frame provides compressi...
Alberton, South Africa
Capping Retainers (UTC-0372A)
- Manufacturer: Labequip
Compression and Flexural Testing Machines Product Code: Description: Unbounded Cap is used for determining of compressive strength of hardened concrete cylinders as alternative method to the sulphur hot capping o...
Alberton, South Africa