HC-MD60 High Precision Wire Drawing Instrument
It is suitable for the pull-out test of the grouting fullness of assembled sleeves. It analyzes the grouting fullness of sleeves by measuring the ultimate pull-out load value of embedded steel wires in batches. I...
Shaoxing, China
HC-HD92/HD852 Floor Thickness Tester
It is mainly used to measure the thickness of cast-in-place slabs, concrete or other non-metallic materials such as walls, columns, beams, wood and ceramics. This instrument is mainly based on the principle of el...
Shaoxing, China
HC-SJ20 Penetration Strength Tester
HC-SJ20 penetration strength tester is a product specially used for testing compressive strength. The instrument measures the penetration depth, calculates and displays the estimated compressive strength in real ...
Shaoxing, China
HT-20J/JC / 75J/JC/ 20K / 75K Digital Mortar Rebound Tester
Product Features HT-20J/JC、HT-75J/JC： Laser detection module, contactless, frictionless, with long service life and higher accuracy; Built in Bluetooth chip, connected to Haichuang mobile app to achieve real-time...
Shaoxing, China
HT-20A Mortar Rebound Tester
Used for non-destructive testing of the compressive strength of masonry mortar in sintered ordinary bricks or sintered porous brick masonry. Imported high-toughness alloy steel spring has good alkalinity and is m...
Shaoxing, China
HC-BC880 Pendulum Knock-In Tester
A new type of testing instrument that measures the penetration depth of nails to estimate the compressive strength of component materials. It is suitable for on-site testing of the compressive strength of bricks ...
Shaoxing, China
HCTJ-10T Carbon Fiber Bond Strength Tester
A new instrument suitable for testing the tensile bond strength between carbon fiber sheets and concrete in civil engineering structures. According to the bond strength and the failure mode during tension, the te...
Shaoxing, China
HC-CK105/CK103/CK101 Crack Width Detector
Product Features HC-CK105： Wireless camera probe, quick shooting button for easy operation; The camera probe integrates a synchronous display screen, which synchronizes width measurement data through wireless tra...
Shaoxing, China
HC-GZ40/60 Micro Anvil
The average rate value of the bullet impact test on the micro steel anvil is [N] = 41 ± 2/60 ± 2
Shaoxing, China
HC-V1S/V3S/V5S/V10S Micro Puller
HC-VnS series micro puller is mainly used for anchor force detection of various anchors, such as anchor rods, steel bars and expansion bolts. Its test range is refined, fully in line with the latest standard requ...
Shaoxing, China
HT-450A/550A High Strength Concrete Rebound Tester
Used for structural engineering high-rise building components, concrete components of bridges (plates, beams, columns, bridge frames), usually suitable for concrete compressive strength testing with strength grad...
Shaoxing, China
HT-450J / 450K/KC / 550J / 550K/KC Digital High Strength Rebound Tester Series
HT-450J/450K/KC digital high-strength rebound tester is used for structural engineering high-rise building components, bridges and concrete components (plates, beams, columns, bridge frames), usually suitable for...
Shaoxing, China
HC-U91/U81 Concrete Ultrasonic Detector
Adopting ultrasonic and microscopic camera technology, it is suitable for the detection of internal defects, crack depth and crack width of non-metallic materials such as concrete, graphite, nylon and their compo...
Shaoxing, China
HT-225A Concrete Rebound Tester
Non-destructive testing of the compressive strength of concrete structures such as buildings, bridges, and tunnels. Imported high-quality Korean SWP piano steel springs have good anti-rebound performance and are ...
Shaoxing, China
HC-BD400 Masonry Flat Top Tester
HC-BD400 masonry flat top instrument is composed of two flat hydraulic jacks, a manual pump, a digital pressure gauge, a reaction frame and a handheld strain gauge. It is mainly used to detect the compressive ela...
Shaoxing, China
Tip: Enter manufacturer, model or keyword