HC-F900/F600 Concrete Crack Defect Comprehensive Tester
It uses ultrasonic and micro-camera technology, and is suitable for the detection of internal defects, crack depth, crack width of non-metallic materials such as concrete, graphite, nylon and their components, as...
Shaoxing, China
HC-CS202 Crack Depth Tester
HC-CS202 crack depth tester adopts ultrasonic principle and is suitable for crack depth detection of concrete, non-metallic surface, etc. Automatically judge the first wave sound time and amplitude, no manual jud...
Shaoxing, China
HCTJ-10T Carbon Fiber Bond Strength Tester
A new instrument suitable for testing the tensile bond strength between carbon fiber sheets and concrete in civil engineering structures. According to the bond strength and the failure mode during tension, the te...
Shaoxing, China
HC-GZ40/60 Micro Anvil
The average rate value of the bullet impact test on the micro steel anvil is [N] = 41 ± 2/60 ± 2
Shaoxing, China
HC-V1S/V3S/V5S/V10S Micro Puller
HC-VnS series micro puller is mainly used for anchor force detection of various anchors, such as anchor rods, steel bars and expansion bolts. Its test range is refined, fully in line with the latest standard requ...
Shaoxing, China
HC-U96S Multifunctional Ultrasonic Low Strain Pile Tester
Acoustic wave transmission method for pile integrity detection Low strain method for pile integrity detection Underground continuous wall integrity detection Concrete ultrasonic rebound comprehensive method for c...
Shaoxing, China
HT-450A/550A High Strength Concrete Rebound Tester
Used for structural engineering high-rise building components, concrete components of bridges (plates, beams, columns, bridge frames), usually suitable for concrete compressive strength testing with strength grad...
Shaoxing, China
HT-450J / 450K/KC / 550J / 550K/KC Digital High Strength Rebound Tester Series
HT-450J/450K/KC digital high-strength rebound tester is used for structural engineering high-rise building components, bridges and concrete components (plates, beams, columns, bridge frames), usually suitable for...
Shaoxing, China
HC-U92 Multifunctional Concrete Ultrasonic Detector
Use the sound wave transmission method and ultrasonic method to detect the integrity of pile foundations, concrete strength, internal defects, crack width and depth in the fields of construction, transportation, ...
Shaoxing, China
HC-TC30 Mortar Strength Tester
HC-TC30 mortar strength pusher consists of a test fixture with a small hydraulic cylinder and a micro manual pump. It is mainly used to estimate the masonry mortar strength in walls with 240mm thick sintered ordi...
Shaoxing, China
HT-225A Concrete Rebound Tester
Non-destructive testing of the compressive strength of concrete structures such as buildings, bridges, and tunnels. Imported high-quality Korean SWP piano steel springs have good anti-rebound performance and are ...
Shaoxing, China
HC-X6 Steel Corrosion Detector
HC-X6 Steel Corrosion Detector is designed to assess the corrosion risk of steel bars in concrete and help prevent structural safety hazards caused by steel corrosion. The instrument is equipped with a 5-inch hig...
Shaoxing, China
HT-225T Integrated Digital Rebound Tester
Nondestructive testing of compressive strength of concrete structures such as buildings, bridges, and tunnels. Integrated design, compact size, light weight, easy to carry; Grating technology, non-contact, fricti...
Shaoxing, China
HT-75A Brick Rebound Tester
Used for non-destructive testing of the compressive strength of sintered porous bricks or sintered ordinary bricks. The finely ground spherical zeroing screw matches the high-strength hook, making the rebound fir...
Shaoxing, China
HC-YZ800 In-Situ Axial Compression Tester
HC-YZ800 in-situ axial pressure tester consists of a type I manual pump, hydraulic cylinder, intelligent pressure numerical display and high-pressure oil pipe with quick connector. It is mainly used to estimate t...
Shaoxing, China
Tip: Enter manufacturer, model or keyword