Used parallel in Lombardy, Italy

PADOVANI LABOR 160 S
- used
- Manufacturer: Padovani
Typology: Chip removal | Height tips: 160 mm | Distance between the tips: 800 mm | Width of the bench: 290 mm | Maximum diameter that can be turned on the bench: 320 mm | Maximum diameter that can be turned on t...
Civate, Italy
WEILER PRIMUS
- used
- Manufacturer: Weiler
- Model: Primus
Typology: Chip removal | Height tips: 125 mm | Distance between the tips: 450 mm | Spindle: Pliers holder Ø max 36 m | Tool tower: Type Multiflex Model A
Civate, Italy
BREDA BRL 250
- used
- Manufacturer: Breda
- Model: BRL 250
Typology: Chip removal | Height tips: 250 mm | Distance between the tips: 3000 mm | Turning diameter on the bench: 500 mm | Turning diameter on the carriage: 300 mm | Passage bar: 60 mm | Tool tower: Type ALGRA ...
Civate, Italy
ZMM CU 500 x 1500
- used
- Manufacturer: ZMM
- Model: CU 500 X 1500
Typology: Chip removal | Height tips: 245 mm | Distance between the tips: 1500 mm | Turning diameter on the bench: 500 mm | Turning diameter on the carriage: 300 mm | Passage bar: 62 mm | Spindle: Ø 250 mm- 3 + ...
Civate, Italy
CLOVIS 250
- used
- Manufacturer: Clovis
Typology: Chip removal | Height tips: 430 mm | Distance between the tips: 5000 mm | Turning diameter on the bench: 860 mm | Passage bar: 80 mm | Spindle: 310 mm dia. | Tool tower: 4 positions | Engine: rapid | E...
Civate, Italy
C.M.T. URSUS 225 x 1000 mm
- used
- Manufacturer: C.M.T.
- Model: Ursus
Typology: Chip removal | Height tips: 225 mm | Distance between the tips: 1000 mm | Turnable diameter on the pallet: 455 mm | Turning diameter on the carriage: 270 mm | Bar passage hole: 52 mm | Spindle: Self ce...
Civate, Italy
Ophthalmoscope L re-scope
- new
With 3.5 V xenon XL lamp or 2.5 V halogen HL lamp. Easy operation with semi-circular wheel aperture, small-medium-large circular diaphragm. Star fixation. Slit and red filter with contrast intensifier. High perfo...
Cavaria, Italy
Ophthalmoscope L re-scope
- new
With 3.5 V xenon XL lamp or 2.5 V halogen HL lamp. Easy operation with semi-circular wheel aperture, small-medium-large circular diaphragm. Star fixation. Slit and red filter with contrast intensifier. High perfo...
Cavaria, Italy
2003 Scm Si400e
- used
- Manufacturer: SCM / SCMI
- Model: SI400E
SCM squaring machine mod. SI400E with CE standards Squaring carriage stroke mm 3200 Three controlled axes Electric ascent, descent, tilting of the blade unit Electronic parallel guide mm 1500 4 pendant controls w...
Trenzano, Italy
2003 Casolin Dgt t. 1.
- used
- Manufacturer: Casolin
Casolin squaring machine mod. DGT T. 1. according to CE standards Squaring carriage stroke mm 3200 Manual parallel guide mm 1270 Maximum blade diameter mm 400 Electric blade group ascent, descent and tilting Sepa...
Trenzano, Italy
TBH Series 3-roll plate bending rolls
- new
TBH Series 3-roll double-pinch plate bending rolls TBH Overview The TBH is a pyramid design plate roll with independent adjustment of the two lower rolls on inclined sliding guides. This allows to pre-bend and ro...
Cremona, Italy
HAND LEVER SHEARING MACHINES - 308 BIS
- new
- Manufacturer: COSTRUZIONI MECCANICHE CACCIA S
Table made of planed cast-iron in a sturdy and strongly ribbed construction. Backstops for parallel and inclined cut, as well as rear gauges for right-angle cut. Adjustment device and spring-type gauges operated ...
Turbigo, Italy
LATHE GRAZIANO SAG 210 CABIN
- used
- Manufacturer: Graziano
LATHE PARALLEL GRAZIANO MODEL SAG 210, HEIGHT POINTS ON THE BENCH 210 MM, DISTANCE TIPS 1000 MM DIAMETER ON THE CARRIAGE 268 MM, DIAMETER ON THE NATURAL TRACK 580 MM PASSAGE BAR 57 MM MOTOR POWER 10 HP. MECHANICA...
Persico Dosimo, Italy
HAND LEVER SHEARING MACHINES - 308 P.S.
- new
- Manufacturer: COSTRUZIONI MECCANICHE CACCIA S
Table made of planed cast-iron in a sturdy and strongly ribbed construction. Gauges for parallel and inclined cut, as well as gauge for right-angle cut. Adjustment device and spring-type adjuster operated by cran...
Turbigo, Italy
ON-TRAK - Integrated Systems
- new
- Manufacturer: TRAK
Linear (OT-4040 and OT-7000) and rotating (OT-2020 and OT-5000) systems to control, by means of ultra-stable lasers and special Position Sensing Module (PSM) modules, the alignment of objects along a line (refere...
Monza, Italy