New Construction in Nuevo León, Mexico

KTM 3VK

• Horsepower: 3 hp
• Gross weight: 1,406.14 kg

Motor power 3HP, variable speed 60 - 500 - 4200 RPM on spindle. 10″ x 50″ hardened and ground table. T-slots. Precision hardened and ground precision spindles with double nut for wear compensation. Meehanite cast...

SGS-816M/MR

• Horsepower: 2 hp
• Gross weight: 798.32 kg

Working capacity: 8″ x 16″ Longitudinal movement is achieved through a linear table with guides and ball bearings. 18″ distance from the center of the spindle to the table. 8″ travel on the Y axis; ideal for mold...

KFD 14

Displacement up to 236" x 166" x 60" (6000 x 4200 x 1500 mm). Table size up to 236" x 134" (6000 x 3400 mm). Cast iron box-in-box frame. Extended Y travel for 5F auto machining. All linear guides for increased ri...

JY VH550

• Horsepower: 10 hp

10 HP motor, infinitely variable speeds. NT-50 spindle taper. 19.7″ x 75″ hardened and ground table. Base and apron with hardened and ground square guides. Precision ACME screws on the X, Y, and Z axes. X, Y, and...

KTM 3VS

• Horsepower: 3 hp
• Gross weight: 1,270.06 kg

Motor power: 3 HP, 60–500–4200 rpm, variable speed. 9″ x 49″ hardened and ground table. T-slots. Precision hardened and ground spindles with double nuts for wear compensation. Meehanite casting with built-in cool...

JY VH780

• Horsepower: 10 hp

10 HP motor, infinitely variable speeds. NT-50 spindle taper. 27.6″ x 102.4″ hardened and ground table. Base and apron with hardened and ground square guides. Precision ACME screws on the X, Y, and Z axes. X, Y, ...

KTM 3VSF

• Horsepower: 3 hp
• Gross weight: 1,179.34 kg

Motor power 3 HP, 50 - 4500 rpm variable speed with frequency inverter. 9″ x 49″ hardened and ground table. T-slots. Precision hardened and ground precision spindles with double nuts for wear compensation. Precis...

KLS 2280C

• Horsepower: 10 hp
• Gross weight: 3,519.87 kg

10 HP motor, 12 speeds. D1-8 Camlock, 4.1" spindle bore. Hardened and ground gears and guides. Speed change button. Mechanical clutch on the headstock. Inch dials. Centralized lubrication on the headstock. Foot b...

KLS 1440

• Horsepower: 3 hp
• Gross weight: 1,954.98 kg

Motor power: 3 HP. Gearbox (16) speeds. Push button for easy gear changes. Hardened and ground guides. Cast iron base and bed. Tray for quick chip clearance. Foot brake. Dials in inches and millimeters. 6" 3-jaw ...

COMPRESSOR

The XA(T,H,V,H)S 146-186 range has been specifically designed to work in the toughest environments, with renowned reliability and efficiency. Whether in refurbishment work, such as sand blasting, or for powering ...

WSi 430

The machine structure is designed and analyzed by CAE system for high structural rigidity. U, V, Z axes are strategically located at the top of the column to improve the rigidity and accuracy of the spindle. High...

KFD 21

Displacement up to 236" x 166" x 60" (6000 x 4200 x 1500 mm). Table size up to 236" x 134" (6000 x 3400 mm). Cast iron box-in-box frame. Extended Y travel for 5F auto machining. All linear guides for increased ri...

KVR 1218

Large working capacity up to 60″ x 32″ x 28″ stroke and 63″ x 28″ table. Powerful 30HP servo spindle motor. Dual auger chip conveyor. High capacity, high flow coolant system with built-in auger and chip conveyor....

KVR 4020A

Large working capacity up to 39.4″ x 19.7″ x 20.5″ stroke and 43″ x 20″ table. Powerful 15HP - 10,000 rpm servo spindle motor with spindle cooler system. Heavy duty "Roller" type Linear guide ways outperform ball...

KLMY 300

• Turning radius: 18.5 m

Maximum turning diameter of 18.5? and maximum turning length of up to 44.88? Symmetrically designed reinforced head for main and sub. High precision spindle with double roller bearing and self-aligning angular be...