New Ceramic Manufacturing Equipment in Texas, USA

LOT OF 3 JERGUSON GAGE GLASS LOS NR.20-23794 MADE IN GERMANY NEW WILL SHIP

JERGUSON GAGE & VALVE CO.STRONGSVILLE,OH LOT OF 3 JERGUSON GAGE GLASS LOS NR.20-23794 MADE IN GERMANY NEW IN BOX *WILL SHIP* IF YOU NEED SHIPPED YOU HAVE TO SEND YOUR SHIPPING LABEL PLUS FEE OF $20 FOR HANDLING A...

#4 ACT22 7/8 x 7/8

• Manufacturer: Giant Finishing

#4 is an extremely aggressive aluminum oxide based ceramic media. Removes stubborn burrs and breaks edges quickly, with a moderate wear rate. 105LBS/ Cu. Ft.

#4 ACT22 3/8 x 3/8

• Manufacturer: Giant Finishing

#4 is an extremely aggressive aluminum oxide based ceramic media. Removes stubborn burrs and breaks edges quickly, with a moderate wear rate. 105LBS/ Cu. Ft.

BV Wedge 1.5"

• Manufacturer: TBT

BV comp is a fast cut aluminum oxide based ceramic media. Removes stubborn burrs and breaks edges quickly, with a good wear rate. 95LBS/ Cu. Ft.

BV Wedge 1"

• Manufacturer: TBT

BV comp is a fast cut aluminum oxide based ceramic media. Removes stubborn burrs and breaks edges quickly, with a good wear rate. 95LBS/ Cu. Ft.

#4 ACT22 5/8 x 5/8

• Manufacturer: Giant Finishing

#4 is an extremely aggressive aluminum oxide based ceramic media. Removes stubborn burrs and breaks edges quickly, with a moderate wear rate. 105LBS/ Cu. Ft.

MC TET/PYR MIX 1-1/4"

• Manufacturer: TBT

MC is a coarse grain aluminum oxide, ceramic media providing an excellent cut to wear ratio. Its metal cut to media wear ratio makes it a very efficient media, suitable for a wide variety of applications. (90 lbs...

SSI ACC 3/4" X 7/8"

• Manufacturer: Giant Finishing

SSI is a coarse grain aluminum oxide, ceramic media providing an excellent cut to wear ratio. Its metal cut to media wear ratio makes it a very efficient media, suitable for a wide variety of applications. (90 lb...

40S ACT45 3/8" X 1/4"

• Manufacturer: Giant Finishing

40S is a silicon carbide based media, it is an extremely fast cutting, ceramic media that provides a fine finish with maximum metal removal in a minimal amount of time. It can be used where brown fused aluminum o...

MC ACC 7/8" X 1-1/2"

• Manufacturer: TBT

MC is a coarse grain aluminum oxide, ceramic media providing an excellent cut to wear ratio. Its metal cut to media wear ratio makes it a very efficient media, suitable for a wide variety of applications. (90 lbs...

MC ACT20 5/8" X 5/8"

• Manufacturer: Giant Finishing

MC is a coarse grain aluminum oxide, ceramic media providing an excellent cut to wear ratio. Its metal cut to media wear ratio makes it a very efficient media, suitable for a wide variety of applications. (90 lbs...

MC Cones 3/4" X 7/8"

• Manufacturer: Giant Finishing

MC is a coarse grain aluminum oxide, ceramic media providing an excellent cut to wear ratio. Its metal cut to media wear ratio makes it a very efficient media, suitable for a wide variety of applications. (90 lbs...

120C Cone 1-1/8" X 1-1/8"

• Manufacturer: Giant Finishing

120C is the abrasive version of our high-density 120 formula. 120C is a long- wearing formula with excellent metal cut. It is typically used on tough aerospace alloys such as titanium. 120-125 LBS/Cu. Ft.

XFC ACT 1-7/8" x 5/8

• Manufacturer: TBT

XFC media is designed for fast metal removal, and surface improvements. Matte finish and moderate wear rate but will reduce cycle time and improve efficiency. 85-90 LBS/cu ft

XFC ACT 5/8" X 5/8"

• Manufacturer: TBT

XFC media is designed for fast metal removal, and surface improvements. Matte finish and moderate wear rate but will reduce cycle time and improve efficiency. 85-90 LBS/cu ft