Building Filters

Used cispr

Anritsu ML428B
- Manufacturer: Anritsu
- Model: ML428B
Anritsu ML428B Details Anritsu ML428B The Anritsu ML428B not only enables measurement of the field strength of general broadcasts and radio communications, but it can also perform measurements of interference wav...
Lake Mary, FL
Rohde & Schwarz ESVD
- Manufacturer: Rohde & Schwarz
- Model: ESVD
Rohde & Schwarz ESVD Details Rohde & Schwarz ESVD Rohde & Schwarz ESVD EMI Test Receiver, 20 MHz - 1 GHz (2 GHz) The R&S ESVD Test Receiver is equally suitable for the measurement of signal strength and interfere...
Lake Mary, FL
Rohde & Schwarz ESL3
- Manufacturer: Rohde & Schwarz
- Model: ESL
Rohde & Schwarz ESL3 Details Rohde & Schwarz ESL3 9kHz To 3GHz EMI Test Receiver The R&S ESL EMI test receiver combines two instruments in one, measuring EMC disturbances in accordance with the latest standards a...
Lake Mary, FL
Rohde & Schwarz ESI26
- Manufacturer: Rohde & Schwarz
- Model: ESI26
This EMI test receivers combines the flexibility and speed of spectrum analyzers with the large dynamic range required for EMI measurements in conformance with standards. ESI carries out measurements in conforman...
Webster, MA
Rohde & Schwarz ESVS-30
- Manufacturer: Rohde & Schwarz
- Model: ESVS
Form Factor Benchtop Test Standard(s) ANSI,C63.4,EN,CISPR,VDE0876 Minimum Frequency 20 MHz Maximum Frequency 1 GHz Input Impedance 50 Ohm Frequency Accuracy 0.000000000000003 % Minimum Sweep Time 50 ms Ma...
Webster, MA
TBOH01 5 µH, 10A LISN, CISPR 16-1-2, CISPR 25, 1 path, EN 55025
- Manufacturer: LiSN
The TBOH01 5uH LISN is a device required to setup conducted noise measurements of DC-powered devices. It is designed to be used for EMC pre-testing in the frequency range of 150kHz to 110 MHz. The LISN is inserte...
Midrand, South Africa
Rohde & Schwarz ESPI
- Manufacturer: Rohde & Schwarz
- Model: ESPI
B2 The R&S ESPI EMI test receivers are especially designed to meet all EMC testing demands during product development and for EMC precertification. Equipped with the preselector/preamplifier option (R&S ESPI-B2),...
Darmstadt, Germany
TBL0550-1 5 µH, 50A LISN, CISPR 16-1-2, CISPR 25, 1 path, EN 55025, MIL-STD-461F
- Manufacturer: LiSN
The TBL0550-1 5µH LISN is a device required to setup conducted noise measurements of DC-powered electronic equipment. It is designed to be used for measurements in the frequency range of 150kHz to 110 MHz accordi...
Midrand, South Africa
SCHWARZBECK NSLK 8127
- Manufacturer: SCHWARZBECK
Single-phase LISN network 2 x 16 A, 10 kHz to 30 MHz. Frequency range: 10 kHz to 30 MHz AMN impedance: (50 µH + 5 ?) || 50 ? Pre-filter choke: 250 µH Maximum continuous current: 2 x 16 A Maximum voltage: - 250 V ...
Rivalta di Torino, Italy
TBLC08 50 Ohm // 50 µH + 5 Ohm, 8A LISN, 2 paths, CISPR 16-1-2
- Manufacturer: LiSN
The TBLC08 50uH LISN is a Line Impedance Stabilization Network for the measurement of line-conducted interference within the range of 9kHz to 30MHz, according to the CISPR16 standard. The device is designed for t...
Midrand, South Africa
TBL5016-3 50 Ohm // 50 µH + 5 Ohm, 16A LISN, 4 paths, CISPR 16-1-2
- Manufacturer: LiSN
The TBL5016-3 is a Line Impedance Stabilization Network for the measurement of line-conducted interference within the range of 9 kHz to 30MHz, according to the CISPR 16-1-2 standard. The device is designed for te...
Midrand, South Africa
TBL5016-2 50 Ohm // 50 µH + 5 Ohm, 16A LISN, 2 paths, CISPR 16-1-2
- Manufacturer: LiSN
The TBL5016-2 is a Line Impedance Stabilization Network for the measurement of line-conducted interference within the range of 9kHz to 30MHz, according to the CISPR 16-1-2 standard. The device is designed for tes...
Midrand, South Africa
T500HVD Non-contact AC high voltage detector with hot stick
- Manufacturer: BEIJING GFUVE ELECTRONICS
The model T500HVD is designed to detect the presence of high voltage without physical contact. As the sensor is moved closer to the voltage carrying conductor, its sensor head picks up the radiated electric field.
Beijing, China
ESRP3 - Test Receiver - ROHDE AND SCHWARZ - 9 kHz - 3.6 GHz
- Manufacturer: Rohde & Schwarz
- Model: ESRP3
EMI Test Receiver9 kHz - 3.6 GHz EMI test receiver and signal/spectrum analyzer combined in one box Weighting detectors: PK+, QPK and CISPR and RMS average (CISPR 16-1-1) Resolution bandwidths according to CISPR ...
Lannion, France