Used valve

7TPH Silica Sand Processing Plant

Equipment List: 1. Power Module: a) Feed Hopper b) Belt Feeder 500x3.5, 2.2kW 2. Conveyor Belt: a) Conveyor Belt 500x15 3kW b) Conveyor Belt 500x10 2.2kW c) Conveyor Belt 500x10 2.2kW 3. Washing Cylinder CM 11.03...

Sand conveyor GFA, 500 l

Year of construction: 1987, weight: 450 kg Ø entrance 150 mm, Ø exit 100 mm Entrance wiht butterfly valvefollowed by a cone valve With pneumatic control valves With high and low level probe Low level with pressur...

Sand conveyor GFA, 500 l

Year of construction: 1987, weight: 450 kg Ø entrance 150 mm, Ø exit 100 mm Entrance wiht butterfly valvefollowed by a cone valve With pneumatic control valves With high and low level probe Low level with pressur...

Sand feeder FAT, 1000 l, CE

Input Ø 275 mm; exit Ø 110 mm With 2 sensors and pneumatic valve Closing by cone on the input side, with manuel valve With control box With declaration of conformity CE

Sand conveyor 350 l, OFFICINE

Year of construction: 1996, Weight : ± 250 kg Konus in good condition With switch panel With pneumatic control valves Ø entry 250mm, Ø exit 90mm With pressure control valve, with additional accelerator at the exit

Sand conveyor STEIN 125 l

Type: SAP-PL, serial number: 148-1082 Year of construction: 1982, Weight: ± 180 kg Input 220 x 220 mm Exit Ø 80mm Pressure max 6 bar With pneumatic valve on the inlet With pressure control equipment With sensor W...

Sand blast vessel, ± 75 l

• Manufacturer: SERBATO / LOSOLA

With pneumatic inletvalve With measuring head "full" With pressure relief valve With fill funnel

Sand silo, +/- 65 m³ = 90 t

With level sensor on the roof and manhole with overpressure valve Without: ladder, balustrade, filter, discharge flap, filling tube

Core sand mixer ±100l

Core sand mixer Dimensions: Length: 1200mm; Width: 1200mm; Height: 1000mm Useful dimensions: Ø700mm; height: 400mm Gear motor: SEW; Type: KF87DRN132M4 7,5kW; 290/500V; 1460rpm Pneumatic application flap Pneumatic...

Sand silo, ± 65 m³, complies with ± 90 t

With level sensor on the roof and manhole with overpressure valve Without ladder, balustrade, filter, discharge flap, filling tube

Sand conveyor 300 l, GUT

With sensors Shutter with pneumatic ventil With control box and bac stop valve on the sand outlet Ø 80 mm

Furan sand mixer BORDEN, ± 2 t/h

Motor UNILEC, type T132, serial number 410416N00003; 4 kW; 220/380 V; 960 rpm 1 x input sand with bucket 20 mm x 50 mm, without bucket 80 mmx 80 mm 1 x additional sand input, Ø 50 mm Between axles enter and exit...

Sand mixer SPEEDMULLOR 80A, 45 t/h

Useful Ø 2.285 mm With 3 wheels (grinding wheels), Ø 810 mm Pneumatic valve on the side

Sand feeder FAT, capacity 1000 l CE

With 2 sensors, with cone valve at sand inlet Input Ø 190 mm Exit Ø 110 mm, air input 1", with CE badge