Used Arena Processing

Sand silo, +/- 65 m³ = 90 t

With level sensor on the roof and manhole with overpressure valve Without: ladder, balustrade, filter, discharge flap, filling tube

Greensand cooler SIMPSON MC, 135 t/h

cooler drive 75 kW ventilator 37 kW 24000 m³/h pression 400 mm WC electric control by PLC Siemens S5 and water dosing water inlet 100 l/min pression 3-6 bar

1994 Core sand mixer 50 L BADIE

Type: KSU 50Serial number: 3/233 / 5AUConstruction year: 1994Weight: ± 225 kgExternal dimensions: length 900 mm, width 700 mm, height 1220 mmEngine: SEW 3 CV; 380 VDrum Ø 500 mm, using height 250 mmPneumatic disc...

Vibrating cruher for chemicel sand

• Manufacturer: HENSEL

Brand: HENSEL, weight: ± 300 kg 2 motors AEG, type U9X, 0,56 kW, 220/400 V, 1410 rpm Sand passage: 50 mm x 5 mm, exit by the loxer part to 300 mm of the ground, output Ø 190 mm Vibration on frame with silent bloc...

Core sand mixer ZAMIX 125 l

Motor: STEPAHAU-WERKE, Type: P13MB6, Serial number: E34046, 5,5 kW, 7,5 hp, 950 rpm, 380V With protection guard and safety protections

1994 Sand conveyor ECO-ENGINEERING, 300 l

Construction year: 1994, weight: ± 400 kg With control, sensors, shutter with pneumatic ventil and emergency stop

Sandbunker 35 m³

Cone length 500 mm Sith framework not very high Without extraction belt which is sold separately

Sand silo 33 m³, complies with ± 50 t

With level sensor on the roof, manhole, 4 removables feet (for the transport) Without ladder, balustrades, filter (dust collector), outlet clap, filling tube

Sand plant DISA, 120 t/h

400 V, 50 Hz - Mixer DISA SAM16-160 - Sand hopper ± 150 m³ and continious sand circulation system - 3 additive hopper, dosing screws - Sand analyzer - Sand and additive weighing - Sand elevator - Polygon screen -...

Sand blast vessel, ± 75 l

• Manufacturer: SERBATO / LOSOLA

With pneumatic inletvalve With measuring head "full" With pressure relief valve With fill funnel

Green sand mixer SPEEDMULLOR 80 A, 45 t

Type 80A 110 kW, 380/660 V With dosing unit With loading bunker With 2 dosing screws With extraction belt

Sand feeder FAT, capacity 1000 l CE

With 2 sensors, with cone valve at sand inlet Input Ø 190 mm Exit Ø 110 mm, air input 1", with CE badge

Sand conveyor 170 l, R.DEBUS

Input Ø 210 mm, output Ø 100 mm, with pressure controller Filling system by cone, max. temperature 200°C, pressure 6 bar, content 170 l With compressed air accelerator on the bottom

Double rolls for foundry sand

Gearmotor SEW, type DFT100LS4, serial number: 02.100.1835.3.13, 2,2 kw, 220/380 V, exit reductor 75 rpm With two rolls turning opposite Length of the rolls 420mm On frame, with filling cone Pinion drive dry enter...

Sand silo 8 m³

Ø 1800 mm With dust filter and flap at the cone end