Used processing in cheko

Sand silo, +/- 65 m³ = 90 t

With level sensor on the roof and manhole with overpressure valve Without: ladder, balustrade, filter, discharge flap, filling tube

Greensand cooler SIMPSON MC, 135 t/h

cooler drive 75 kW ventilator 37 kW 24000 m³/h pression 400 mm WC electric control by PLC Siemens S5 and water dosing water inlet 100 l/min pression 3-6 bar

1994 Core sand mixer 50 L BADIE

Type: KSU 50Serial number: 3/233 / 5AUConstruction year: 1994Weight: ± 225 kgExternal dimensions: length 900 mm, width 700 mm, height 1220 mmEngine: SEW 3 CV; 380 VDrum Ø 500 mm, using height 250 mmPneumatic disc...

Sandlabo sand compactability tester G&F, sand lab PVG

With manual hydraulic lever and sample sleeve Testing of the compactability Put sand from the container on to the funnel sieve and press through until the sand in the sample specimen tube overflows Carefully lift...

Core sand batch mixer, ± 80 l, BOTON-MERLET

Type: BM 80 EL, serial number: 870-567 Motor BONFIGLIOLI, 3 kW, 1410 rpm, 230/400 V Exit 280 mm, height 190 mm, mixer with 3 arms With senor for door closing With pneumatic valve With electric control cabinet, M...

1972 Pneumatic sand transport 250 l, RONOT

Serial number: 16083, construction year: 1972 Max operating pressure 4 bar Max operating temperature 25°C Pneumatic clap (valve) Sensor with 2 flaps at the entrance Sand input Ø 145 mm, sand output Ø 70mm Capacit...

Shake-out grid for green sand with one axle for imbalancement

3Kw Grid 1x aperture 80mm, second row aperture 35mm, installed on 12 springs Ø external 140mm, height 260mm, exit from below 1400 x 670mm

2000 Pneumatic sand transport SNE-RONOT 250 l

Construction year: 2000, weight: 350 kg Useful Ø 650 mm Capacity 250 l On 3 feet With pneumatic clap With 2 sensors Input sand Ø 200mm, output sand Ø 70mm

Sand conveyor STEIN 125 l

Type: SAP-PL, serial number: 148-1082 Year of construction: 1982, Weight: ± 180 kg Input 220 x 220 mm Exit Ø 80mm Pressure max 6 bar With pneumatic valve on the inlet With pressure control equipment With sensor W...

Srewmixer for furan-sand turbo 15 t/h IMF, single arm

Useful length 1800 mm, Ø 210 mm Control in the socle posed on a raise, relais control Motor bridled on screw

Vibrating cruher for chemicel sand

• Manufacturer: HENSEL

Brand: HENSEL, weight: ± 300 kg 2 motors AEG, type U9X, 0,56 kW, 220/400 V, 1410 rpm Sand passage: 50 mm x 5 mm, exit by the loxer part to 300 mm of the ground, output Ø 190 mm Vibration on frame with silent bloc...

Core sand mixer ZAMIX 125 l

Motor: STEPAHAU-WERKE, Type: P13MB6, Serial number: E34046, 5,5 kW, 7,5 hp, 950 rpm, 380V With protection guard and safety protections

Sand hopper 35 m³

For silica sand, capacity 35 m³ each With 2 compartments With square output 200 mm x 20 mm With level sond, built on 4 feet With small discharging belt

1994 Sand conveyor ECO-ENGINEERING, 300 l

Construction year: 1994, weight: ± 400 kg With control, sensors, shutter with pneumatic ventil and emergency stop

Core sand mixer 50 l FORDATH

Motor NORMANCE, type: MJPT106.56, serial number: 934564; 4,4 kW; 220 V; 940 rpm With hand clap manual With protection grid Opening half-round With button start-stop With limiter switch at the grid Driven by drivi...