Used construction in Belgium

Sand conveyor KLEIN 200 l

Outside dimensions: Ø 750 mm, inlet height: 1450 mm Cone closing 8 bar, content 200 L, 100°C Overhauled with a new switch cabinet

Sand feeder FAT, 1000 l, CE

Input Ø 275 mm; exit Ø 110 mm With 2 sensors and pneumatic valve Closing by cone on the input side With declaration of conformity CE

Sand silo trio 2 x ±35m³; 1x ±46m³

• Manufacturer: HOLTEWERT / Dynasys

Consisting of 3 silos Space requirement: Length: ±10m; Width: ±2.5m - Large silo Dimensions: Total height: 14806mm; Ø3200mm Usable dimensions: Hopper height: 1574mm; Cone height: 6020mm - 2 x smaller silo Dimensi...

Green sand mixer GIROMIXER G17, ± 50 t/h

Brand: BONVILLAIN COMAFOND, type GIROMIXER G17, serial number: 36987 Useful Ø: 1650 mm, height: 950 mm Sand entry: 800 mm, width: 400mm Motor CEM/ NEUL 250M4 + NEUL 280S4, 55 kW, 220/380 V, 50 Hz, 1480 rpm With 1...

Sand plant DISA, 120 t/h

400 V, 50 Hz - Mixer DISA SAM16-160 - Sand hopper ± 150 m³ and continious sand circulation system - 3 additive hopper, dosing screws - Sand analyzer - Sand and additive weighing - Sand elevator - Polygon screen -...

Articulated furan sand mixer IMF, 20 t/h

Type: T36/20S, serial number: 071/98 Turbo screw with gear motor 15 kW First arm is a belt conveyor with gear motor 0.75 kW Motorized with a gear-brake motor 0.37 kW Two with 2 gear wheel pumps (1 in ertalon and...

Sand blast vessel, ± 75 l

• Manufacturer: SERBATO / LOSOLA

With pneumatic inletvalve With measuring head "full" With pressure relief valve With fill funnel

Sand conveyor 170 l, R.DEBUS

Input Ø 210 mm, output Ø 100 mm, with pressure controller Filling system by cone, max. temperature 200°C, pressure 6 bar, content 170 l With compressed air accelerator on the bottom

Greensand cooler, 20 -30 t/h SPACE

15 kW, 380 V, 50 Hz With fluidized bed cooler Vibrating conveyor Vibrating motor 4 kW, 220/380 V Fluidizing ventilator 11 kW, 380/660 V Needs filter 15.000m³/h

Sand conveyor 300 l, GUT

With sensors Shutter with pneumatic ventil With control box and bac stop valve on the sand outlet Ø 80 mm

Sand blast vessel ARIA, ± 280 l

Type: PN179/89, serial number: 586 With funnel and cover With pneumatic control box and pressure regulator

Sandfeeder KLEIN, 200 l

Year of construction:1 972, weight: ±250 kg 3 sand inputs, Ø 150 mm 1 sand output , Ø 70 mm With one level sensor With pressure regulator

Pneumatic sand transporter 220 l

Type: DE12, Serial number: 9484 Year of construction: 26/11/2001, Weight: ± 300 kg With gate valve Ø 160mm, outlet Ø 80mm Without command panel

Sand conveyor 350 l, OFFICINE

Year of construction: 1996, Weight : ± 250 kg Konus in good condition With switch panel With pneumatic control valves Ø entry 250mm, Ø exit 90mm With pressure control valve, with additional accelerator at the exit

Sand conveyor GFA, 500 l

Year of construction: 1987, weight: 450 kg Ø entrance 150 mm, Ø exit 100 mm Entrance wiht butterfly valvefollowed by a cone valve With pneumatic control valves With high and low level probe Low level with pressur...