- Trusted Seller

APV Ribbon Blender Half-Jacketed Processor
- Manufacturer: APV
APV Ribbon Blender Half-Jacketed ProcessorModel: 27, S/N: K-2681, Nat'l Board No: 7228. S/N: 00-179. Mfg Date: 2000. Blender 59 in. long x 37.5 in. wide x 49.5 in. deep. Agitator: SS Ribbon, w/ new Sew-Eurodriv...
Stanton, ND - Trusted Seller

2007 APV BP9 M-10
- Manufacturer: APV
Max. Allowable Working Pressure Made in: UNITED STATES | Chamber 1: H2&H4 -145/FV psi at 203 | Chamber 2: H2&H3 145/FV psi at 203 | Test pressure: 189 psi | Operating temp. max/min: 203 F / 32F | Drawing no.: 060...
- Trusted Seller

2006 APV B134 M-20
- Manufacturer: APV
Max. Allowable Working Pressure: Chamber 1: H1&H4 399PSI | Chamber 2: H2&H3 399PSIG | Test pressure: 519 Psi | Platage dim (l) max/min: 56-3/8/ 55-3/16 | Platage dim based on: 385/0.8MM | Connector diameter: 12" ...
- Trusted Seller
APV H17
- Manufacturer: APV
- Model: H17
Used stainless steel plate heat exchanger by APV type H17. Heat exchange surface 5.3 m2. Output 40.1 kW. Working volume - side 1 - 9.5 l, side 2 - 9.5 l. Working pressure 6 bar. Test pressure 10 bar. Working temp...
Hainesport, NJ - Trusted Seller
APV TR1 M14
- Manufacturer: APV
Used stainless steel contact parts plate heat exchanger by APV type TR1 M14. Heat exchanger has 65 plates with dimensions: L 49 cm x W 16 cm. Plates are mounted in two sections - first has 16 plates, second 49 pl...
Hainesport, NJ - Trusted Seller

300 GALLON APV COOKER-COOLER - S/S - JACKETED (USED RECONDITIONED)
- Manufacturer: APV
1 - USED 300 GALLON APV COOKER/COOLER - Wide Bottom & Side Sweep Agitator - Dome Top - Deep Cone Bottom - 2" Tri-Clamp Outlet - 95 psi Jacket On Cone & Sidewall @ 350 deg. F - Approx. 72" dia. x 90" H Offered r...
USA - Trusted Seller

4kw APV TPM+1 High Speed Inline Tri-Blender
- Manufacturer: APV
- Model: TPM1
4kw APV TPM+1 High Speed Inline Tri-Blender Used/Refurbished 4kw APV TPM+1 High Speed Inline Tri-Blender with a Max. Flow of Approx. 28,000 LPH (tested on water), available for IMMEDIATE SALE...
Lockerbie, United Kingdom - Trusted Seller

6 SQ. FT. APV SCRAPED SURFACE HEAT EXCHANGER – S/S ROTOR
- Manufacturer: APV
USED 6 sq. ft. APV Scraped Surface Heat Exchanger - 6 in. dia. x 48 in. long - Stainless steel rotor - 2-blade design - 10 HP 3/60/208-230-460 volt 1720 RPM drip proof motor - In self contained cabinet. - Offere...
USA - Trusted Seller

New APV Model PHE Stainless Steel Plate Heat Exchanger
- Manufacturer: APV
New APV Model PHE Stainless Steel Plate Heat Exchanger - 126 stainless steel plates - 35” long x 19” wide x 62” high plates dimensions - 2 ½” inlet & outlet - 10 °C minimum temperature design - 90 °C maximum temp...
Mexico - Trusted SellerLorquí, Spain
- Trusted Seller

4kw APV TPM+1 High Speed Inline Tri-Blender
- Manufacturer: APV
- Model: TPM1
4kw APV TPM+1 High Speed Inline Tri-Blender This is a Used / Refurbished 4kw APV TPM+1 High Speed Inline Tri-Blender, which has a Max. Rated Flow of Approx. 22,000 LPH (tested on water), currently held in stock a...
Lockerbie, United Kingdom - Trusted Seller

2,250 litre APV Insulated Tank with conical bottom
- Manufacturer: APV
top mounted air vent, 6" sight glass, and a side ladder. tank has a 2" rjt inlet to sprayball and a 3" rjt outlet at bottom of the tank. Stood on four legs. Test pressure - Fill up. Working pressure - atmos.
Retford, United Kingdom - Trusted SellerAuction

1994 APV N 35
- Manufacturer: APV
- Model: N 35
Auction item. Plate heat exchanger was in working condition. Not used for a year. Nominal Capacity 4.0 M3/H Heat transfer capacity 16.2 m2 Working pressure 6.0 bar Test pressure 7.0 bar Product production volume ...
Šiauliai, LithuaniaVisit Auction Website 
APV N35 Plate Heat Exchanger
- Manufacturer: APV
Used APV N35 Plate Heat Exchanger Manufacturer: APV Model: N35 Year of Manufacture: 2010 Serial No.: 500530 Drawing No.: 1924 6322-1 Connections: 3” RJT Nominal Capacity: 500Kw Heat Transfer Surfa...
Doncaster, United Kingdom
APV Z 35 Plate Heat Exchanger
- Manufacturer: APV
Used APV Z 35 Plate Heat Exchanger Manufacturer: APV Model: Z 35 Year of Manufacture: 1996 Fabrication No.: 42389 Serial No.: 1800 0296-1 Connections: 80mm flange Nominal Performance: 12,200 kg/...
Doncaster, United Kingdom

