Used Tanks & Kettles

160 Gallon Engel Plastic Tank with Basket Filter Strainer

• Manufacturer: Engel
• Size: 160

44" diameter. 1/2" thick plastic walls with an additional 3/16" thick liner. Total wall thickness = 11/16". Lid is 3/16" thick. Inside of tank is stainless steel spreader bar for pick up with clevis hooks. T...

6,850 Gal. Stainless Steel Liquid Mix Tank Jacketed

• Manufacturer: Enerfab Inc.
• Size: 6850

All wetted surfaces are 304 stainless steel, jacket material is carbon steel. Tank cylinder is 120" diameter, 140" straight side, top and bottom dished heads. Tank is supported on a carbon steel skirted base ring...

475 Gal Tote Products Stainless Steel Portable Tank

• Manufacturer: Tote Products
• Size: 475

Constructed of welded 304 stainless steel. Tank Wall Thicknes of 0.105" (12GA.). 42" diameter X 6' tall Welded top cover with 22"Ø clamp-on lid. Sloped bottom with 2"Ø drain. Design pressure 9.5 PSI 2-way forklif...

Stainless Steel Cone Bottom Liquid Tank - 580 Gal.

• Manufacturer: Industrial Air Inc.
• Size: 580

Heavy-duty all stainless steel liquid tank with a wall thickness of 0.195". 54" diameter with a 58" vertical side length, flat top and cone bottom. Welded, multi-port flat top cover with lifting lugs. 30° bottom ...

10' Clean Out of Place COP Tank

used 275 Gallon COP Tank (clean out of place tank) Trough with Plug Valve and Anderson AJ-300 Chart Recorder. Trough is 24" W x 22" Deep x 10' L.

3000 Gallon Stainless Steel Tank

used 3000 gallon Stainless Steel Storage Tank. Dish top, Dish bottom.7'6" dia x 8'6" T/T (11'2" Overall Height). Has top center flange to mount agitator/mixer (sold separately, Blenders/Mixer category). Approx 3/...

WALKER 1500 gallon Mix Tank

• Manufacturer: Walker

1500 gallon Stainless Steel Mix Tank with Scrape Agitation. Built by Walker. 6'3" Dia. x 6; T/T. Cone bottom. 3" Center bottom outlet. 11' OAH. 2 HP, 208-230/460 volt, 1750 rpm motor into 71.44:1 gear reducer...

750 Gallon Stainless Steel Insulated Liquid Tank and Support Stand

• Size: 750

Tank is constructed of stainless steel, with a galvanized steel support stand. Tank measures 60" inside diameter X 60" straight sidewall with top/bottom dished heads. Constructed with approximately 2" thick insul...

22 Gallon Stainless Steel Walker Lab Mix / Weigh Tank

• Manufacturer: Walker
• Size: 22

Demonstration video on file. Overall dimensions: 38x29x74. Weight = 473 lbs. No Impellor shaft for mixer

568 Liter (150 gallon) Stainless Steel Portable Mix Tank

• Size: 160

Tank is 36" diameter with a 39" vertical side wall, radiused edge and sloped bottom. Tank Cylinder Wall Thickness: 0.054" Top cover with center bridge and a hinged access hatch. 1/3HP Lightnin mixer drive head (1...

60" Dia. Stainless Steel Vertical Liquid Holding Tank 630 Gallon

• Size: 630

All stainless steel material in contact with liquid. Tank: single wall 60" diameter cylinder, 58" straight side with dished bottom and bolted top cover Tank Wall: 0.280" Working Capacity: 630 gallons Top Ports: 1...

6,500L (1,717 gal) Stainless Insulated Jacketed Liquid Storage Vessel Tank

• Manufacturer: Blackwater Engineering
• Size: 1717

Tank wall is constructed from 316 stainless steel sheet 6'-10" diameter with 81" vertical length with welded sloped bottom and cone top Stainless steel sheet outer cladding with 3" thick side insulation Top insta...

6,500L (1,717 gal) Stainless Insulated Jacketed Liquid Storage Vessel Tank

• Manufacturer: Blackwater Engineering IE
• Size: 1717

Tank shell is constructed from 316 stainless steel sheet 6'-10" diameter with 81" vertical length with welded sloped bottom and cone top Stainless steel sheet outer cladding with 3" thick side insulation Pressure...

fuel tank

fuel tank

550 Gallon (2,000 Liter) Bendel Stainless Steel Liquid Mix Tank

• Manufacturer: Bendel, LLC
• Size: 550

All 304 stainless steel, formed and welded flat-bottom tank (11GA stainless sheet) Ø54" X 60" straight side Flat top with twin hinged access panels and bridged support for a vertical-mount agitator. Shaft and pr...